EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 427 (2023) E3S Web Conf., 427 (2023) 03030 References
Open Access
Issue
E3S Web Conf.
Volume 427, 2023
International Conference on Geotechnical Engineering and Energetic-Iraq (ICGEE 2023)
Article Number 03030
Number of page(s) 8
Section Transportation Science and Technology
DOI https://doi.org/10.1051/e3sconf/202342703030
Published online 13 September 2023
  1. Huang, Y.H. Pavement analysis and design. 1993. [Google Scholar]
  2. Garber, N.J. and L.A. Hoel. Traffic and highway engineering. Cengage Learning. 2014. [Google Scholar]
  3. Papagiannakis, A.T. and E.A. Masad, Pavement design and materials. 2017: John Wiley & Sons. [Google Scholar]
  4. Asphalt Institute, A.I. Asphalt Mix Design Methods, MS-2, 7th-Edition. 2014. [Google Scholar]
  5. Asphalt Institute, A.I. Construction of Quality Asphalt Pavements, MS-22, Third Edition. 2020. [Google Scholar]
  6. ADVANCED ASPHALT TECHNOLOGIES, LLC. A Manual for Design of Hot Mix Asphalt with Commentary. Transportation Research Board. 2011. [Google Scholar]
  7. AASHTO. Standard Method of Test for Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device. AASHTO T 322-07. 2011. [Google Scholar]
  8. Miller, J.S. and W.Y. Bellinger, Distress identification manual for the long-term pavement performance program. United States. Federal Highway Administration. Office of Infrastructure. 2014. [Google Scholar]
  9. ASPHALT INSTITUTE. Asphalt overlays for highway and street rehabilitation. Asphalt Institute. 1983. [Google Scholar]
  10. Sousa, J.B., J. Craus, and C.L. Monismith. Summary report on permanent deformation in asphalt concrete. 1991. [Google Scholar]
  11. Hafeez, I., et al. Laboratory fatigue performance evaluation of different field laid asphalt mixtures. Construction and Building Materials. 2013; 44(1): 792–797. [CrossRef] [Google Scholar]
  12. Asphalt Institute, A.I., Asphalt in Pavement Preservation and Maintenance, MS-16, fourth Edition. 2009. [Google Scholar]
  13. Witczak, Matthew W., et al. Laboratory validation of an endurance limit for asphalt pavements. Washington, DC, USA: Transportation Research Board. 2013. [CrossRef] [Google Scholar]
  14. AMERI, Mahmoud; YEGANEH, Sadegh; VALIPOUR, Peyman Erfani. Experimental evaluation of fatigue resistance of asphalt mixtures containing waste elastomeric polymers. Construction and Building Materials. 2019; 198(1): 638–649. [CrossRef] [Google Scholar]
  15. Asphalt Institute, A.I. The ASPHALT BINDER HANDBOOK, MS-26-1st Edition. 2011. [Google Scholar]
  16. Read, J.W., David Hunter, Robert N, The shell bitumen handbook. Thomas Telford. 2003. [Google Scholar]
  17. Asphalt Institute, A.I. ASPHALT BINDER TESTING. 2012. [Google Scholar]
  18. Asphalt Institute, A.I., THE BITUMEN INDUSTRY-A Global Perspective,Production, chemistry, use, specification and occupational exposure, Asphalt Institute Inc. and European Bitumen Association–Eurobitume,Third Edition. 2015. [Google Scholar]
  19. AHMEDZADE, Perviz. The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen. Construction and Building Materials. 2013; 38(1): 285–291. [CrossRef] [Google Scholar]
  20. Airey, Gordon D. Rheological evaluation of ethylene vinyl acetate polymer modified bitumens. Construction and Building materials. 2002; 16(8): 473–487. [CrossRef] [Google Scholar]
  21. ZHU, Jiqing; BIRGISSON, Björn; KRINGOS, Niki. Polymer modification of bitumen: Advances and challenges. European Polymer Journal. 2014; 54(1): 18–38. [CrossRef] [Google Scholar]
  22. YAN, Kezhen; XU, Hongbin; YOU, Lingyun. Rheological properties of asphalts modified by waste tire rubber and reclaimed low density polyethylene. Construction and Building Materials. 2015; 83(1): 143–149. [CrossRef] [Google Scholar]
  23. XIAO, Feipeng; AMIRKHANIAN, Serji N. Laboratory investigation of utilizing high percentage of RAP in rubberized asphalt mixture. Materials and structures. 2010; 43(1): 223–233. [CrossRef] [Google Scholar]
  24. HUANG, Yue; BIRD, Roger N.; HEIDRICH, Oliver. A review of the use of recycled solid waste materials in asphalt pavements. Resources, conservation and recycling. 2007; 52(1): 58–73. [CrossRef] [Google Scholar]
  25. Sienkiewicz, Maciej, et al. The effect of tyre rubber grinding method on the rubber-asphalt binder properties. Construction and Building Materials. 2017; 154(1): 144–154. [CrossRef] [Google Scholar]
  26. WANG, Shifeng, et al. Asphalt modified by thermoplastic elastomer based on recycled rubber. Construction and Building Materials. 2015; 93(1): 678–684. [CrossRef] [Google Scholar]
  27. McNally, T. Polymer modified bitumen: Properties and characterisation. Elsevier. 2011. [CrossRef] [Google Scholar]
  28. Karkush M.O., Abdulkareem M.S.. Deep remediation and improvement of soil contaminated with residues oil using lime piles. International Journal of Environmental Science and Technology. 2019 Nov;16:7197–7206. [CrossRef] [Google Scholar]
  29. Karkush M.O., Yassin S.A.. Using sustainable material in improvement the geotechnical properties of soft clayey soil. Journal of Engineering Science and Technology. 2020 Aug;15(4):2208–2222. [Google Scholar]
  30. Al-Murshedi A.D., Karkush M.O., Karim H.H.. Collapsibility and shear strength of gypseous soil improved by nano silica fume (NSF). Key Engineering Materials. 2020 Sep 7;857:292–301. [CrossRef] [Google Scholar]
  31. ASTM, Standard Terminology Relating to Materials for Roads and Pavements,ASTM D 8. 2018. [Google Scholar]
  32. ASTM, ASTM D6114 Standard Specification for Asphalt-Rubber Binder. 2009. [Google Scholar]
  33. AASHTO, Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA), AASHTO T-324-14. 2014. [Google Scholar]
  34. CEN, et al. Bituminous mixtures–test methods for hot mix asphalt–Part 22: Wheel tracking. UNI. 2003. [Google Scholar]
  35. ASTM, Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending ASTM D 7460. 2010. [Google Scholar]
  36. AIREY, Gordon Dan. Rheological characteristics of polymer modified and aged bitumens. PhD Thesis. University of Nottingham. 1997. [Google Scholar]
  37. Punith, V., M. Thyagaraj, and A. Veeraragavan. Studies on tensile strength characteristics of dense bituminous macadam mix with crumb rubber as modifier. in Proceedings of the 3rd International Conference on Bituminous Mixtures and Pavements, HELD THESSALONIKI, GREECE, NOVEMBER 2002. 2002. [Google Scholar]
  38. Lee, S.-J., et al., The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements. Construction and Building Materials. 2008; 22(7): 1368–1376. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.