EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 430 (2023) E3S Web Conf., 430 (2023) 01111 References
Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01111
Number of page(s) 8
DOI https://doi.org/10.1051/e3sconf/202343001111
Published online 06 October 2023
  1. Awasthi, A., A. Gupta, K. K. Saxena, R. K. Dwivedi, D. Kundalkar, D. S. Abdul-Zahra, et al. 2022. “Design and Analysis of Equal-Channel Angular Pressing of Al6061: A Comparative Study.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  2. Awasthi, A., K. K. Saxena, and V. Arun. 2020. “Sustainability and Survivability in Manufacturing Sector.” In Modern Manufacturing Processes, 205-219. Woodhead Publishing. [Google Scholar]
  3. Awasthi, A., K. K. Saxena, and V. Arun. 2021. “Sustainable and Smart Metal Forming Manufacturing Process.” Materials Today: Proceedings 44: 2069-2079. [CrossRef] [Google Scholar]
  4. Basavapoornima, C., C. R. Kesavulu, T. Maheswari, W. Pecharapa, S. R. Depuru, and C. K. Jayasankar. 2020. “Spectral Characteristics of Pr3+-doped Lead Based Phosphate Glasses for Optical Display Device Applications.” Journal of Luminescence 228: 117585. [CrossRef] [Google Scholar]
  5. Bhukya, M. N., and V. R. Kota. 2019. “A Quick and Effective MPPT Scheme for Solar Power Generation During Dynamic Weather and Partial Shaded Conditions.” Engineering Science and Technology, an International Journal 22, no. 3: 869-884. [CrossRef] [Google Scholar]
  6. Chakraborty, D., A. Rathi, R. Singh, V. K. Pathak, A. K. Srivastava, A. Sharma, et al. 2023. “External Six-bar Mechanism Rehabilitation Device for Index Finger: Development and Shape Synthesis.” Robotics and Autonomous Systems 161: 104336. [CrossRef] [Google Scholar]
  7. Chauhan, R. B., T. V. Shah, D. H. Shah, T. J. Gohil, A. D. Oza, B. Jajal, and K. K. Saxena. 2023. “An Overview of Image Processing for Dental Diagnosis.” Innovation and Emerging Technologies 10: 2330001. [CrossRef] [Google Scholar]
  8. Dikshit, M. K., S. Singh, V. K. Pathak, K. K. Saxena, M. K. Agrawal, V. Malik, et al. 2023. “Surface Characteristics Optimization of Biocompatible Ti6Al4V with RCCD and NSGA II Using Die Sinking EDM.” Journal of Materials Research and Technology 24: 223-235. [CrossRef] [Google Scholar]
  9. Eid, Mostafa, Saleh Kaytbay, Omayma Elkady, and Ahmed El-Assal. “Microstructure and mechanical properties of CF/Al composites fabricated by hot coining technique.” Ceramics International 47, no. 15 (2021): 21890-21904. [CrossRef] [Google Scholar]
  10. Gopi, K. R., H. Shivananda Nayaka, and Sandeep Sahu. “Investigation of microstructure and mechanical properties of ECAP-processed AM series magnesium alloy.” Journal of Materials Engineering and Performance 25 (2016): 3737-3745. [CrossRef] [Google Scholar]
  11. Gupta, P., N. Gupta, and K. K. Saxena. 2023. “Predicting Compressive Strength of Geopolymer Concrete Using Machine Learning.” Innovation and Emerging Technologies 10: 2350003. [CrossRef] [Google Scholar]
  12. Kalpana, G., P. V. Kumar, S. Aljawarneh, and R. V. Krishnaiah. 2018. “Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning.” Computers & Electrical Engineering 65: 178-195. [CrossRef] [Google Scholar]
  13. Kandhare, A. D., P. A. Thakurdesai, P. Wangikar, and S. L. Bodhankar. 2019. “A Systematic Literature Review of Fenugreek Seed Toxicity by Using ToxRTool: Evidence from Preclinical and Clinical Studies.” Heliyon 5, no. 4. [Google Scholar]
  14. Korpi, A. G., Ş. Ţălu, M. Bramowicz, A. Arman, S. Kulesza, B. Pszczolkowski, et al. 2019. “Minkowski Functional Characterization and Fractal Analysis of Surfaces of Titanium Nitride Films.” Materials Research Express 6, no. 8: 086463. [CrossRef] [Google Scholar]
  15. Kumar, Ashish, Ravindra Singh Rana, and Rajesh Purohit. “Microstructure evolution, mechanical properties, and fractography of AA7068/Si3N4 nanocomposite fabricated thorough ultrasonic-assisted stir casting advanced with bottom pouring technique.” Materials Research Express 9, no. 1 (2022): 015009. [CrossRef] [Google Scholar]
  16. Kumar, P. S. S., and K. V. Allamraju. 2019. “A Review of Natural Fiber Composites [Jute, Sisal, Kenaf].” Materials Today: Proceedings 18: 2556-2562. [CrossRef] [Google Scholar]
  17. Kumar, P., A. Kumar Jain, J. P. Srivastava, R. Kumar, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Multiphysics Simulation of the Shape Prediction and Material Removal Rate in Electrochemical Machining Process.” Advances in Materials and Processing Technologies: 1-13. [Google Scholar]
  18. Kumari, C. U., A. S. D. Murthy, B. L. Prasanna, M. P. P. Reddy, and A. K. Panigrahy. 2021. “An Automated Detection of Heart Arrhythmias Using Machine Learning Technique: SVM.” Materials Today: Proceedings 45: 1393-1398. [CrossRef] [Google Scholar]
  19. Li, Chao, Jianwei Teng, Biaobiao Yang, Xianjue Ye, Jiantao Liu, and Yunping Li. “Correlation between microstructure and mechanical properties of novel Co-Ni-based powder metallurgy superalloy.” Materials Characterization 181 (2021): 111480. [CrossRef] [Google Scholar]
  20. Muralidharan, N., K. Chockalingam, I. Dinaharan, and K. Kalaiselvan. “Microstructure and mechanical behavior of AA2024 aluminum matrix composites reinforced with in situ synthesized ZrB2 particles.” Journal of Alloys and Compounds 735 (2018): 2167-2174. [CrossRef] [Google Scholar]
  21. Nair, A., S. Kumanan, C. Prakash, D. G. Mohan, K. K. Sxena, S. Kumar, and G. Kumar. 2023. “Research Developments and Technological Advancements in Conventional and Non-conventional Machining of Superalloys–a Review.” Journal of Adhesion Science and Technology: 1-72. [Google Scholar]
  22. Noga, Piotr, Lechosław Tuz, Krzysztof Żaba, and Adam Zwoliński. “Analysis of microstructure and mechanical properties of alsi11 after chip recycling, co-extrusion, and arc welding.” Materials 14, no. 11 (2021): 3124. [CrossRef] [PubMed] [Google Scholar]
  23. Pereira, Juan Carlos, Jon Aranzabe, Mari Carmen Taboada, Noelia Ruiz, and Pedro Pablo Rodriguez. “Analysis of microstructure and mechanical properties in as-built/as-cast and heat-treated conditions for IN718 alloy obtained by selective laser melting and investment casting processes.” Crystals 11, no. 10 (2021): 1196. [CrossRef] [Google Scholar]
  24. Pon, V. D., K. J. Wilson, K. Hariprasad, V. Ganesh, H. E. Ali, H. Algarni, and I. S. Yahia. 2021. “Enhancement of Optoelectronic Properties of ZnO Thin Films by Al Doping for Photodetector Applications.” Superlattices and Microstructures 151: 106790. [CrossRef] [Google Scholar]
  25. Prateek, Soumy, Rajnish Garg, Kuldeep Kumar Saxena, V. K. Srivastav, Hitesh Vasudev, and Nikhil Kumar. 2023. “Data-driven Materials Science: Application of ML for Predicting Band Gap.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  26. Raj, I. L. P., S. Valanarasu, K. Hariprasad, J. S. Ponraj, N. Chidhambaram, V. Ganesh, et al. 2020. “Enhancement of Optoelectronic Parameters of Nd-doped ZnO Nanowires for Photodetector Applications.” Optical Materials 109: 110396. [CrossRef] [Google Scholar]
  27. Ramazani, Ali, Krishnendu Mukherjee, Aydemir Abdurakhmanov, Mahmoud Abbasi, and Ulrich Prahl. “Characterization of microstructure and mechanical properties of resistance spot welded DP600 steel.” Metals 5, no. 3 (2015): 1704-1716. [CrossRef] [Google Scholar]
  28. Sambasivam, S., A. S. Abed, S. Chopde, P. P. Patil, P. Math, A. Parmar, et al. 2023. “Role of Processing Techniques Related to Mg-MMCs for Biomedical Implantation: An Overview.” Materials Today: Proceedings. [Google Scholar]
  29. Sarkhel, P., M. K. Dikshit, V. K. Pathak, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Robust Deflection Control and Analysis of a Fishing Rod-type Flexible Robotic Manipulator for Collaborative Robotics.” Robotics and Autonomous Systems 159: 104293. [CrossRef] [Google Scholar]
  30. Singh, B., I. Kumar, K. K. Saxena, K. A. Mohammed, M. I. Khan, S. B. Moussa, and S. S. Abdullaev. 2023. “A Future Prospects and Current Scenario of Aluminium Metal Matrix Composites Characteristics.” Alexandria Engineering Journal 76: 1-17. [CrossRef] [Google Scholar]
  31. Singh, S., V. Agrawal, K. K. SAXENA, and K. A. Mohammed. 2023. “Optimization on Manufacturing Processes at Indian Industries Using TOPSIS.” Indian Journal of Engineering and Materials Sciences (IJEMS) 30, no. 1: 32-44. [Google Scholar]
  32. Tang, Peng, Wenfang Li, Kang Wang, Jun Du, Xiyong Chen, Yanjun Zhao, and Weizhou Li. “Effect of Al-Ti-C master alloy addition on microstructures and mechanical properties of cast eutectic Al-Si-Fe-Cu alloy.” Materials & Design 115 (2017): 147-157. [CrossRef] [Google Scholar]
  33. Vinoth, S., G. Kanimozhi, K. Hari Prasad, K. Harish, E. S. Srinadhu, and N. Satyanarayana. 2019. “Enhanced Ionic Conductivity of Electrospun Nanocomposite (PVDF-HFP+ TiO2 Nanofibers Fillers) Polymer Fibrous Membrane Electrolyte for DSSC Application.” Polymer Composites 40, no. 4: 1585-1594. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.