EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 430 (2023) E3S Web Conf., 430 (2023) 01112 References
Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01112
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202343001112
Published online 06 October 2023
  1. Awasthi, A., A. Gupta, K. K. Saxena, R. K. Dwivedi, D. Kundalkar, D. S. Abdul-Zahra, et al. 2022. “Design and Analysis of Equal-Channel Angular Pressing of Al6061: A Comparative Study.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  2. Awasthi, A., K. K. Saxena, and V. Arun. 2020. “Sustainability and Survivability in Manufacturing Sector.” In Modern Manufacturing Processes, 205-219. Woodhead Publishing. [Google Scholar]
  3. Awasthi, A., K. K. Saxena, and V. Arun. 2021. “Sustainable and Smart Metal Forming Manufacturing Process.” Materials Today: Proceedings 44: 2069-2079. [CrossRef] [Google Scholar]
  4. Basavapoornima, C., C. R. Kesavulu, T. Maheswari, W. Pecharapa, S. R. Depuru, and C. K. Jayasankar. 2020. “Spectral Characteristics of Pr3+-doped Lead Based Phosphate Glasses for Optical Display Device Applications.” Journal of Luminescence 228: 117585. [CrossRef] [Google Scholar]
  5. Bhukya, M. N., and V. R. Kota. 2019. “A Quick and Effective MPPT Scheme for Solar Power Generation During Dynamic Weather and Partial Shaded Conditions.” Engineering Science and Technology, an International Journal 22, no. 3: 869-884. [CrossRef] [Google Scholar]
  6. Bhuvanesh Kumar, Manickam, Paulraj Sathiya, and Sathyamangalam Munusamy Senthil. “A critical review of wire arc additive manufacturing of nickel-based alloys: principles, process parameters, microstructure, mechanical properties, heat treatment effects, and defects.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 45, no. 3 (2023): 164. [CrossRef] [Google Scholar]
  7. Chakraborty, D., A. Rathi, R. Singh, V. K. Pathak, A. K. Srivastava, A. Sharma, et al. 2023. “External Six-bar Mechanism Rehabilitation Device for Index Finger: Development and Shape Synthesis.” Robotics and Autonomous Systems 161: 104336. [CrossRef] [Google Scholar]
  8. Chao, Qi, Sebastian Thomas, Nick Birbilis, Pavel Cizek, Peter D. Hodgson, and Daniel Fabijanic. “The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel.” Materials Science and Engineering: A 821 (2021): 141611. [CrossRef] [Google Scholar]
  9. Chauhan, R. B., T. V. Shah, D. H. Shah, T. J. Gohil, A. D. Oza, B. Jajal, and K. K. Saxena. 2023. “An Overview of Image Processing for Dental Diagnosis.” Innovation and Emerging Technologies 10: 2330001. [CrossRef] [Google Scholar]
  10. Dikshit, M. K., S. Singh, V. K. Pathak, K. K. Saxena, M. K. Agrawal, V. Malik, et al. 2023. “Surface Characteristics Optimization of Biocompatible Ti6Al4V with RCCD and NSGA II Using Die Sinking EDM.” Journal of Materials Research and Technology 24: 223-235. [CrossRef] [Google Scholar]
  11. Ding, Donghong, Zengxi Pan, Stephen Van Duin, Huijun Li, and Chen Shen. “Fabricating superior NiAl bronze components through wire arc additive manufacturing.” Materials 9, no. 8 (2016): 652. [PubMed] [Google Scholar]
  12. Gupta, P., N. Gupta, and K. K. Saxena. 2023. “Predicting Compressive Strength of Geopolymer Concrete Using Machine Learning.” Innovation and Emerging Technologies 10: 2350003. [CrossRef] [Google Scholar]
  13. Kalpana, G., P. V. Kumar, S. Aljawarneh, and R. V. Krishnaiah. 2018. “Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning.” Computers & Electrical Engineering 65: 178-195. [CrossRef] [Google Scholar]
  14. Kandhare, A. D., P. A. Thakurdesai, P. Wangikar, and S. L. Bodhankar. 2019. “A Systematic Literature Review of Fenugreek Seed Toxicity by Using ToxRTool: Evidence from Preclinical and Clinical Studies.” Heliyon 5, no. 4. [Google Scholar]
  15. Korpi, A. G., Ş. Ţălu, M. Bramowicz, A. Arman, S. Kulesza, B. Pszczolkowski, et al. 2019. “Minkowski Functional Characterization and Fractal Analysis of Surfaces of Titanium Nitride Films.” Materials Research Express 6, no. 8: 086463. [CrossRef] [Google Scholar]
  16. Kumar, P. S. S., and K. V. Allamraju. 2019. “A Review of Natural Fiber Composites [Jute, Sisal, Kenaf].” Materials Today: Proceedings 18: 2556-2562. [CrossRef] [Google Scholar]
  17. Kumar, P., A. Kumar Jain, J. P. Srivastava, R. Kumar, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Multiphysics Simulation of the Shape Prediction and Material Removal Rate in Electrochemical Machining Process.” Advances in Materials and Processing Technologies: 1-13. [Google Scholar]
  18. Kumari, C. U., A. S. D. Murthy, B. L. Prasanna, M. P. P. Reddy, and A. K. Panigrahy. 2021. “An Automated Detection of Heart Arrhythmias Using Machine Learning Technique: SVM.” Materials Today: Proceedings 45: 1393-1398. [CrossRef] [Google Scholar]
  19. Liu, Jianwen, Jie Liu, Yixin Li, Ruifeng Zhang, Zhuoran Zeng, Yuman Zhu, Kai Zhang, and Aijun Huang. “Effects of post heat treatments on microstructures and mechanical properties of selective laser melted Ti6AL4V alloy.” Metals 11, no. 10 (2021): 1593. [CrossRef] [Google Scholar]
  20. Nair, A., S. Kumanan, C. Prakash, D. G. Mohan, K. K. Sxena, S. Kumar, and G. Kumar. 2023. “Research Developments and Technological Advancements in Conventional and Non-conventional Machining of Superalloys–a Review.” Journal of Adhesion Science and Technology: 1-72. [Google Scholar]
  21. Papula, Suvi, Mingshi Song, Aaron Pateras, Xiao-Bo Chen, Milan Brandt, Mark Easton, Yuriy Yagodzinskyy, Iikka Virkkunen, and Hannu Hänninen. “Selective laser melting of duplex stainless steel 2205: Effect of post-processing heat treatment on microstructure, mechanical properties, and corrosion resistance.” Materials 12, no. 15 (2019): 2468. [CrossRef] [PubMed] [Google Scholar]
  22. Pon, V. D., K. J. Wilson, K. Hariprasad, V. Ganesh, H. E. Ali, H. Algarni, and I. S. Yahia. 2021. “Enhancement of Optoelectronic Properties of ZnO Thin Films by Al Doping for Photodetector Applications.” Superlattices and Microstructures 151: 106790. [CrossRef] [Google Scholar]
  23. Prateek, Soumy, Rajnish Garg, Kuldeep Kumar Saxena, V. K. Srivastav, Hitesh Vasudev, and Nikhil Kumar. 2023. “Data-driven Materials Science: Application of ML for Predicting Band Gap.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  24. Raj, I. L. P., S. Valanarasu, K. Hariprasad, J. S. Ponraj, N. Chidhambaram, V. Ganesh, et al. 2020. “Enhancement of Optoelectronic Parameters of Nd-doped ZnO Nanowires for Photodetector Applications.” Optical Materials 109: 110396. [CrossRef] [Google Scholar]
  25. Sambasivam, S., A. S. Abed, S. Chopde, P. P. Patil, P. Math, A. Parmar, et al. 2023. “Role of Processing Techniques Related to Mg-MMCs for Biomedical Implantation: An Overview.” Materials Today: Proceedings. [Google Scholar]
  26. Sarkhel, P., M. K. Dikshit, V. K. Pathak, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Robust Deflection Control and Analysis of a Fishing Rod-type Flexible Robotic Manipulator for Collaborative Robotics.” Robotics and Autonomous Systems 159: 104293. [CrossRef] [Google Scholar]
  27. Shankar, Karthik Venkitraman, Jan Jezierski, Vaira Vignesh Ramalingam, Devaprasad Padmakumar, Midun Raj Leena, Gokul Reghunath, and Rakesh Krishnan. “Investigating the effect of fly ash addition on the metallurgical and mechanical behavior of Al-Si-Mg-Cu alloy for engine cylinder head application.” Materials 15, no. 15 (2022): 5462. [CrossRef] [PubMed] [Google Scholar]
  28. Singh, B., I. Kumar, K. K. Saxena, K. A. Mohammed, M. I. Khan, S. B. Moussa, and S. S. Abdullaev. 2023. “A Future Prospects and Current Scenario of Aluminium Metal Matrix Composites Characteristics.” Alexandria Engineering Journal 76: 1-17. [CrossRef] [Google Scholar]
  29. Singh, S., V. Agrawal, K. K. SAXENA, and K. A. Mohammed. 2023. “Optimization on Manufacturing Processes at Indian Industries Using TOPSIS.” Indian Journal of Engineering and Materials Sciences (IJEMS) 30, no. 1: 32-44. [Google Scholar]
  30. Sun, Yu, Rainer J. Hebert, and Mark Aindow. “Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel.” Materials & Design 156 (2018): 429-440. [CrossRef] [Google Scholar]
  31. Tanvir, A. N. M., MD RU Ahsan, Gijeong Seo, Jae-duk Kim, Changwook Ji, Brian Bates, Yousub Lee, and Duck Bong Kim. “Heat treatment effects on Inconel 625 components fabricated by wire+ arc additively manufacturing (WAAM)—part 2: mechanical properties.” The International Journal of Advanced Manufacturing Technology 110 (2020): 1709-1721. [CrossRef] [Google Scholar]
  32. Tapoglou, Nikolaos, Joseph Clulow, Andrew Patterson, and David Curtis. “Characterisation of mechanical properties of 15-5PH stainless steel manufactured through direct energy deposition.” CIRP Journal of Manufacturing Science and Technology 38 (2022): 172-185. [CrossRef] [Google Scholar]
  33. Trevisan, Francesco, Flaviana Calignano, Massimo Lorusso, Jukka Pakkanen, Alberta Aversa, Elisa Paola Ambrosio, Mariangela Lombardi, Paolo Fino, and Diego Manfredi. “On the selective laser melting (SLM) of the AlSi10Mg alloy: process, microstructure, and mechanical properties.” Materials 10, no. 1 (2017): 76. [CrossRef] [PubMed] [Google Scholar]
  34. Vinoth, S., G. Kanimozhi, K. Hari Prasad, K. Harish, E. S. Srinadhu, and N. Satyanarayana. 2019. “Enhanced Ionic Conductivity of Electrospun Nanocomposite (PVDF-HFP+ TiO2 Nanofibers Fillers) Polymer Fibrous Membrane Electrolyte for DSSC Application.” Polymer Composites 40, no. 4: 1585-1594. [CrossRef] [Google Scholar]
  35. Zhang, Dongyun, Zhe Feng, Chengjie Wang, Weidong Wang, Zhen Liu, and Wen Niu. “Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting.” Materials Science and Engineering: A 724 (2018): 357-367. [CrossRef] [Google Scholar]
  36. Zhang, Mina, Xianglin Zhou, Dafeng Wang, Wuzhi Zhu, Jinghao Li, and Yaoyao Fiona Zhao. “AlCoCuFeNi high-entropy alloy with tailored microstructure and outstanding compressive properties fabricated via selective laser melting with heat treatment.” Materials Science and Engineering: A 743 (2019): 773-784. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.