EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 430 (2023) E3S Web Conf., 430 (2023) 01214 References
Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01214
Number of page(s) 13
DOI https://doi.org/10.1051/e3sconf/202343001214
Published online 06 October 2023
  1. A. Mukhtar. Introduction to Engineering Materials and their applications (Academia Press, Pakistan, 2016) [Google Scholar]
  2. A. C. Lima, V. A. Ferraresi, R. B. Reis. Journal of Materials Engineering and Performance, 3 (2018) 1 [Google Scholar]
  3. V. Senthilkumar, Journal of Construction. 8 (2015) 7. [Google Scholar]
  4. T. S. Ogedengbe, A. P. Okediji, A. A. Yussouf, O. A. Aderoba, O. A. Abiola, I. O. Alabi & I. O. Alonge. Journal of Physics: Conference Series. 1378 (2019) 022012. [CrossRef] [Google Scholar]
  5. T.S. Ogedengbe, S. Abdulkareem, J.O. Aweda. Covenant Journal of Engineering Technology (Special Edition), 1 (2018) 12. [Google Scholar]
  6. I. Omiogbemi, I. Dagwa, F. Okibe & D. Yawas. International Journal of Scientific and Engineering Research. 6 (2017) 1327. 10.4314/njt.v36i3.25. [Google Scholar]
  7. J. Wiley. Principles of Modern Manufacturing, 2013) [Google Scholar]
  8. P. K. Kashyap, C. Reddy, A. Singh, P. Kumar. SAE International Journal of Alternative Powertrains. 8 (2019). 10.4271/08-08-02-0007. [Google Scholar]
  9. A. Miyara, K. Tsubaki, S. Inoue, & K. Yoshida. Renewable Energy, 36 (2011) 764. [CrossRef] [Google Scholar]
  10. C. Qiu, M. A. Kindi, A. S. Aladawi & I. A. Hatmi. Scientific reports, 8 (2018) 1. [CrossRef] [PubMed] [Google Scholar]
  11. A. C. Hall, D. J. Cook, R. A. Neiser, T. J. Roemer & D. A. Hirschfeld. Journal of Thermal Spray Technology, 15 (2006) 233. [CrossRef] [Google Scholar]
  12. M. X. Wei, S. Q. Wang, and X. H. Cui. Wear 274 (2012) 84. [CrossRef] [Google Scholar]
  13. M. Ishak. Joining Technologies (2016). [Google Scholar]
  14. T. S. Ogedengbe, O. M. Ikumapayi, S. A. Afolalu, A. I. Musa-Olokuta, T. A. Adeyi., M. O. Omovigho & J. B. Nkanga. Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials. 32 (2022) 199. [Google Scholar]
  15. M. Sezhian, R. Vetrivel, K. Ramadoss, G. Giridharan, G. Chakravarthi, and B. Stalin. Materials Today: Proceedings 33 (2020) 4842. [CrossRef] [Google Scholar]
  16. M. A. Bodude & I. Momohjimoh. Journal of Minerals and Materials Characterization and Engineering, 3 (03) 142. [Google Scholar]
  17. S. Karna, M. Cheepu, D. Venkateswarulu, & V. Srikanth. IOP Conference Series: Materials Science and Engineering. 330 (2018) 012068. [CrossRef] [Google Scholar]
  18. S. Altarazi, L. Hijazi, & E. Kaiser. IEEE International Conference on industrial engineering and engineering management (IEEM) 1041. [Google Scholar]
  19. Y. S. Tarng, H. L. Tsai, and S. S. Yeh. International Journal of Machine Tools and Manufacture 39 (1999) 1427. [CrossRef] [Google Scholar]
  20. E. O. Ogundimu. Characterization of TIG and MIG Hybrid Welding of Type-304 Austenitic Stainless Steel. University of Johannesburg (South Africa, 2017) [Google Scholar]
  21. S. G. Shiri, M. Nazarzadeh, M. Sharifitabar & M. S. Afarani. Transactions of Nonferrous Metals Society of China, 22 (2012) 2937. https://Doi.Org/10.1016/S1003-6326(11)61553-7 [CrossRef] [Google Scholar]
  22. M. Erinosho, E. Akinlabi & Ogundimu, Emmanuel. Surface Review and Letters. 25 (2017). 10.1142/S0218625X18500427. [Google Scholar]
  23. I. A. Syarul, I. Amira, and A. Ghaliba. Procedia Engineering 41 (2012) 1497. [CrossRef] [Google Scholar]
  24. A. N. Karpagaraj, N. Rajesh-Kumar, N. Thiyaneshwaran, S. Shanmugam, M. Cheepu, and R. Sarala. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42 (2020)1. [CrossRef] [Google Scholar]
  25. J. Casanova, S. Gonçalo, V. Pedro and S. D. Brandi. The International Journal of Advanced Manufacturing Technology 111 (2020) 3225. [CrossRef] [Google Scholar]
  26. C. Yao, B. Xu, X. Zhang, J. Huang, J. Fu, Y. Wu. Journal of Optics and Lasers in Engineering, 47 (2009) 807. [CrossRef] [Google Scholar]
  27. M. M. H. Abadi and M. Pouranvari. Mediterranean Journal of Materials. 16 (2010) 133. [Google Scholar]
  28. A. K. Biradar, M. M. Akarate and S. Ram Reddy. International J. of Math. Sci. & Engg. Appls. (IJMSEA). 3 (2009) 33. [Google Scholar]
  29. Z. Hu, L. Hua, X. Qin, M. Ni, F. Ji & M. Wu. Journal of Manufacturing Processes 64 (2001) 1359. doi:10.1016/j.jmapro.2021.02.061 [CrossRef] [Google Scholar]
  30. J. D. Majumdar. Journal of Naval Architecture and Marine Engineering, 3 (2008) 38. https://doi.org/10.3329/jname.v3i1.927 [Google Scholar]
  31. P. Podržaj, S. Simončič. Int J Adv Manuf Technol 52 (2011), 959. https://doi.org/10.1007/s00170-010-2794-0 [CrossRef] [Google Scholar]
  32. S A A Akbari-Mousavi, L. M. Barrett, T. S. Al-HASSANI. Journal of Materials Processing Technology, 202 (2008) 224. [CrossRef] [Google Scholar]
  33. S. A. Mohamata, I. A. Ibrahima, A. Amira, A. Ghaliba. Procedia Engineering 41 (2012) 1497 [CrossRef] [Google Scholar]
  34. L. Sharma, R. Chhibber. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 233 (2019) 739. doi: 10.1177/0954408918794036 [CrossRef] [Google Scholar]
  35. S. A. Afolalu, O. D. Samuel and O. M. Ikumapayi. Journal of Materials Research and Technology. 9 (2020) 9232. [CrossRef] [Google Scholar]
  36. A. Kumar and K. Singh. Journal of Advanced Manufacturing Systems. 19 (2019) 1. [Google Scholar]
  37. S. A. Afolalu, O. M. Ikumapayi, T. S. Ogedengbe, M. E. Emetere. Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials. 31 (2021) 153. [Google Scholar]
  38. F. O. Obi, B. O. Ugwuishiwu and J. N. Nwakaire. Nigerian Journal of Technology (NIJOTECH). 35 (16) 957. [Google Scholar]
  39. S. R. Govindapillai, K. K. Patheri, E. Devan, P. S. Mundarath, N. M. Vellaore. International Journal of Recycling of Organic Waste in Agriculture. 7 (2018) 83. [CrossRef] [Google Scholar]
  40. H. Karimi, M. Mokhtari, F. Salehi, S. Sojoudi, A. Ebrahimi. Int J Recycl Org Waste Agric. 6 (2017) 57. https://doi. org/10.1007/s40093-016-0152-4 [Google Scholar]
  41. W. O. Owais. Academy of Strategic Management Journal. 20 (2021) 1. [Google Scholar]
  42. Ecocrop. Ecocrop database (2011, FAO) [Google Scholar]
  43. K. Narasimharao, S. Al-Thabaiti, H. Kumar-Rajor, M. Mokhtar, A. Alsheshri, S. Yahya-Alfaifi, S. I. Siddiqui, N. K. Abdulla. Journal of Materials Research and Technology. 18 (2022) 3581. https://doi.org/10.1016/j.jmrt.2022.03.176. (Al-Farsi et al., 2017) [CrossRef] [Google Scholar]
  44. S. El-Rahman and S. Al-Mulhem. Clin Med Case Rep. 1 (2017) 101 [Google Scholar]
  45. E. Baffour-Awuah, S. A. Akinlabi, T. C. Jen, S. Hassan, I. P. Okokpujie, F. Ishola. IOP Conf. Series: Materials Science and Engineering. 1107 (2021) 012090 [CrossRef] [Google Scholar]
  46. I. Uchegbulam, E. O. Momoh, S. A. Agan. Cleaner Materials 6 (2022) 100154, https://doi.org/10.1016/j.clema.2022.100154. [CrossRef] [Google Scholar]
  47. A. Shahat, M. A. Hassan, M. F. Hassan, O. El-Shahat, O. El Shahawy and Md Rabiul Awual. New Journal of Chemistry 43 (2019) 10324. [Google Scholar]
  48. E. C. Okoroigwe, C. M. Saffron and P. D. Kamdem. Journal of Chemical Engineering and Materials Science. 5 (2014) 1. [CrossRef] [Google Scholar]
  49. E. Y. Salawu, O. A. Oluseyi, I. Anthony, S. Akinlabi, and Esther Akinlabi. Results in Engineering 3 (2019) 100025. [CrossRef] [Google Scholar]
  50. A. F. Rugayah, A. A. Astimar & N. Norzita. Journal of Oil Palm Research, 26 (2014) 251. [Google Scholar]
  51. L. M. Orejuela-Escobar, A. C. Landázuri & B. Goodell. Journal of Bioresources and Bioproducts, 6 (2021) 83. [CrossRef] [Google Scholar]
  52. S. A. Afolalu, S. Akinlabi, S. O. Ongbali & A. A. Abioye. International Journal of Mechanical and Production Engineering Research and Development 9 (2019) 887. [Google Scholar]
  53. S. A. Afolalu, O. M. Ikumapayi, T. S. Ogedengbe & A. T. Ogundipe. Proceedings of the International Conference on Industrial Engineering and Operations Management (Nsukka, Nigeria, 2022) 1200. [Google Scholar]
  54. B. U. Oreko, O. B. Otanocha, S. Idi. International Journal of Integrated Engineering. 12 (2020) 115. [Google Scholar]
  55. O. M. Oluwafemi, S. R. Oke, I. O. Otunniyi, and F. O. Aramide, Leonardo Electronic Journal Of Practices And Technologies. 1 (2015) 41. [Google Scholar]
  56. A. P. Ihom, G. B. Nyior, I. J. Nor, N. J. Ogbodo. American Journal of Materials Science and Engineering, 1 (2013) 29. [Google Scholar]
  57. O. M. Ikumapayi, E. T. Akinlabi, J. D. Majumdar. Metrology and Properties 2019. [Google Scholar]
  58. N. Fatchurrohman, N. Farhana and C. D. Marini. IOP Conf. Series: Materials Science and Engineering 319 (2018) 012032. [CrossRef] [Google Scholar]
  59. S. O. Omole, J. F. Akinfolarin and R. T. Oluyori. International Journal of Engineering and Applied Sciences, 4 (2014) 19. [Google Scholar]
  60. T. B. Asafa. International Journal of Advanced Science and Technology, 8 (2015) 1. [CrossRef] [Google Scholar]
  61. V. S. Aigbodion. Usak University Journal of Material Sciences 2 (2012) 187. [Google Scholar]
  62. P. P. Kulkarni, B. Siddeswarappa and K. S. Hemanth Kumar. Journal of Composite Materials, 9 (2019), 312. [CrossRef] [Google Scholar]
  63. T. S. Ogedengbe, T. A. Adeyi, O. Q. Ajao, & O. A. Ileoye, (2022). Nigerian Journal of Technological Development, 19 (3), 333. [CrossRef] [Google Scholar]
  64. H. Elkhouly, M. Rushdi and K. Abdel-Magie, Materials Research Express, 7 (2020) 025. [Google Scholar]
  65. B. Agoudjil, A. Benchabane, A. Boudennec, L. Ibos, M. Fois. Energy and Buildings 43 (2011) 491. [CrossRef] [Google Scholar]
  66. K. Riahi, B. B. Thayer, A. B. Mammou, A. B. Ammar, M. H. Jaafoura. Journal of Hazardous Materials 170 (2009) 511. [CrossRef] [PubMed] [Google Scholar]
  67. O. M. Ikumapayi and E. T. Akinlabi. Journal of Environmental Science and Technology. 1 (2018) 220. [CrossRef] [Google Scholar]
  68. I. M. Dagwa, P. F. Builders and J. Achebo. Int. J. Mech. Mechatron. Eng.. 12 (2012) 18. [Google Scholar]
  69. H. Zheng, L. Wang, Soft Nanoscience Letters, 3 (2013) 29. [CrossRef] [Google Scholar]
  70. M. Achaka, A. Hafidi, N. Ouazzani, S. Sayadi, L. Mandi. Journal of Hazardous Materials 166 (2009) 117. [CrossRef] [PubMed] [Google Scholar]
  71. T. S. Ogedengbe, S. Abdulkareem and O. P. Ogunware. International Journal of Engineering Materials and Manufacture, 6 (2021) 332. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.