EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 430 (2023) E3S Web Conf., 430 (2023) 01225 References
Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01225
Number of page(s) 7
DOI https://doi.org/10.1051/e3sconf/202343001225
Published online 06 October 2023
  1. Ogedengbe T.S., Abdulkareem S. and Aweda J.O. Effect of Coolant Temperature on Surface Finish during Turning of Titanium Alloy Ti6Al4V, International Journal of Engineering Materials and Manufacture, 3(4), 237-244, (2018). [CrossRef] [Google Scholar]
  2. Ogedengbe, T. S., Okediji, A. P., Yussouf, A. A., Aderoba, O. A., Abiola, O. A., Alabi, I. O., & Alonge, O. I. The effects of heat generation on cutting tool and machined workpiece. In Journal of Physics: Conference Series (Vol. 1378, No. 2, p. 022012). IOP Publishing, (2019, December). [CrossRef] [Google Scholar]
  3. Raja Dhas J. Edwin, Savio Lewise K. Anton, Kumar K. Naveen, Raja Vijayanandh, AL-bonsrulah Hussein A. Z., Ahmad Hija Effect of coconut shell nanopowder reinforcement in the development of palm fiber composites. Frontiers in Materials. Vol. 9 (1), (2022). 10.3389/fmats.2022.986011 [Google Scholar]
  4. Windeatt, J. H., Ross, A. B., Williams, P. T., Forster, P. M., Nahil, M. A., and Singh, S. (Characteristics of biochars from crop residues: Potential for carbon sequestration and soil amendment. Journal of Environmental Management, 146, 189–197. 2014. [CrossRef] [PubMed] [Google Scholar]
  5. Afolalu, S. A., Ikumapayi, O. M., Ogedengbe, T. S., & Ogundipe, A. T Techniques of Agro Wastes Materials as Viable Adsorbents-A Review. Proceedings of the International Conference on Industrial Engineering and Operations Management Nsukka, Nigeria, 5 - 7 April, (2022). https://ieomsociety.org/proceedings/2022nigeria/209.pdf [Google Scholar]
  6. Gordon, A., and Jackson, J.,Case study: Application of appropriate technologies to improve the quality and safety of coconut water. In Food Safety and Quality Systems in Developing Countries (Vol. 2). Elsevier Inc, (2017). [Google Scholar]
  7. Dangi B., Yadav D. International Research Journal of Engineering and Technology, Enhancing the Characteristics of Reinforced Concrete Alteration with Coconut Shell. Volume: 05 Issue: 07, (2018). [Google Scholar]
  8. Ogedengbe, T. S., Abdulkareem, S., Afolalu, S. A., & Ibitoye, S. O. Chip Morphological Behaviour During Machining Of Ti-6Al-4V Using Refrigerated Soluble Oil. In IOP Conference Series: Materials Science and Engineering (Vol. 1107, No. 1, p. 012042). IOP Publishing, (2021, April). [CrossRef] [Google Scholar]
  9. Yue C., Feng H., Zhong Z. and Zhang H. Development and Application of Materials of Cutting Tools for Machining of Hard Materials, Recent Patents on Materials Science , 8, 000-000, (2015). [Google Scholar]
  10. Das S. Cutting Tool: Chronology of Its Development, Indian Science Cruiser (ISSN : 0970-4256) Volume 35 No 6, (2021). 10.24906/isc/2021/v35/i6/211369 [Google Scholar]
  11. Sadh, P. K., Duhan, S., & Duhan, J. S. Agro-industrial wastes and their utilization using solid state fermentation: a review. Bioresources and Bioprocessing, 5(1), 1–15, (2018). [CrossRef] [Google Scholar]
  12. Sunday A. Afolalu, Segun Oladipupo, Edun Bose M, Abiodun A. Abioye, Samuel B. Adejuyigbe, Oluseyi O. Ajayi, Samson O. Ongbali J. Phys.: Conf. Ser. 1378 032032, (2019). doi:10.1088/1742-6596/1378/3/032032 [CrossRef] [Google Scholar]
  13. Reddy, Dareddy Ramana, and Banoth Balunaik. “Development of a Composite Material from Agro Waste for Wear Resistance Application.” Materials Science Forum, 2013. https://doi.org/10.4028/www.scientific.net/msf.773-774.319 . [Google Scholar]
  14. Fernandez, M. E., B. Ledesma, S. Román, P. R. Bonelli, and A. L. Cukierman. “Development and Characterization of Activated Hydrochars from Orange Peels as Potential Adsorbents for Emerging Organic Contaminants.” Bioresource Technology. (2015) https://doi.org/10.1016/j.biortech.2015.02.035. [Google Scholar]
  15. Kalyanapu Venkateswara Rao, A.H.L. Swaroop, Dr.P. Kodanda Rama Rao, Ch. Naga Bharath Study On Strength Properties Of Coconut Shell Concrete, International Journal of Civil Engineering and Technology (IJCIET), ISSN 0976 – 6308 (Print), ISSN 0976 – 6316(Online), Volume 6, Issue 3, March (2015), pp. 42-61, (2015). [Google Scholar]
  16. M. Nur, S.B. Hut The Performance of eggshell powder as an additive in concrete mixed, final year thesis, (2015). [Google Scholar]
  17. T. Zaman1 *, Mst. S. Mostari, Md. A. Al Mahmood, Md. S. Rahman Evolution and characterization of eggshell as a potential candidate of raw material, Cerâmica 64 (2018). 236-241. http://dx.doi.org/10.1590/0366-69132018643702349 [Google Scholar]
  18. S. D. Genieva, S. Ch. Turmanova, A. S. Dimitrova and L. T. Vlaev, Characterization of Rice Husks and the Products of its Thermal Degradation in air or Nitrogen Atmosphere, Journal of Thermal Analysis and Calorimetry, Vol. 93 (2008) 2, 387–396. [CrossRef] [Google Scholar]
  19. Olawale, Olamide, Festus Adekunle Oyawale Characterization of Rice Husk via Atomic Absorption Spectrophotometer for Optimal Silica Production, International Journal of Science and Technology, Volume 2 No.4, April (2012). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.