EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 430 (2023) E3S Web Conf., 430 (2023) 01251 References
Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01251
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202343001251
Published online 06 October 2023
  1. Abderrafai, Y., Mahdavi, M. H., Sosa-Rey, F., Hérard, C., Navas, I. O., Piccirelli, N., ... & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials & Design, 214, 110358. [CrossRef] [Google Scholar]
  2. Karaş, B., Smith, P. J., Fairclough, J. P. A., & Mumtaz, K. (2022). Additive manufacturing of high density carbon fibre reinforced polymer composites. Additive Manufacturing, 58, 103044. [CrossRef] [Google Scholar]
  3. Bazhin, P. M., Konstantinov, A. S., Chizhikov, A. P., Pazniak, A. I., Kostitsyna, E. V., Prokopets, A. D., & Stolin, A. M. (2021). Laminated cermet composite materials: the main production methods, structural features and properties. Ceramics International, 47(2), 1513-1525. [CrossRef] [Google Scholar]
  4. Costache, A.C., Moagăr-Poladian, G., Obreja, c. a., Tutunaru, o., rădoi, a., & pachiu, c. chemical and physical study of waste pa2200 powder. [Google Scholar]
  5. Khan, H. M., Sirin, T. B., Tarakci, G., Bulduk, M. E., Coskun, M., Koc, E., & Kaynak, Y. (2021). Improving the surface quality and mechanical properties of selective laser sintered PA2200 components by the vibratory surface finishing process. SN Applied Sciences, 3(3), 1-14. [CrossRef] [Google Scholar]
  6. Morales-Rodriguez, A., Reynaud, P., Fantozzi, G., Adrien, J., & Maire, E. (2009). Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography. Scripta Materialia, 60(6), 388-390. [CrossRef] [Google Scholar]
  7. Athreya, S. R., Kalaitzidou, K., & Das, S. (2011). Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding. Composites science and technology, 71(4), 506-510. [CrossRef] [Google Scholar]
  8. Dincă, L. L., Popa, N. M., Milodin, N. L., Stanca, C., & Gheorghiu, D. (2019). Influence of the process parameters on mechanical properties of the final parts obtained by selective laser sintering from PA2200 powder. In MATEC Web of Conferences (Vol. 299, p. 01001). EDP Sciences. [CrossRef] [EDP Sciences] [Google Scholar]
  9. Singh, O. P., Kumar, G., & Kumar, M. (2019). Role of Taguchi and grey relational method in optimization of machining parameters of different materials: a review. Acta Electronica Malaysia (AEM), 3(1), 19-22. [CrossRef] [Google Scholar]
  10. Ito, M., Sakamoto, T., Uehara, M., Tsuruta, K., Tamura, K., Mutoh, H., & Nagai, K. (2011). Combustion behavior and application of polyolefin-based floor sheet laminated with Nylon-6/clay nanocomposites film. Fire and materials, 35(3), 171-181. [CrossRef] [Google Scholar]
  11. Salazar, A., Rico, A., Rodríguez, J., Escudero, J. S., Seltzer, R., & de la Escalera Cutillas, F. M. (2014). Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature. Composites Part B: Engineering, 59, 285-292. [CrossRef] [Google Scholar]
  12. Cedeño-Viveros, L. D., Vázquez-Lepe, E., Rodríguez, C. A., & García-López, E. (2021). Influence of process parameters for sheet lamination based on laser micro-spot welding of austenitic stainless steel sheets for bone tissue applications. The International Journal of Advanced Manufacturing Technology, 115(1), 247-262. [CrossRef] [Google Scholar]
  13. Blala, H., Lang, L., Khan, S., Li, L., & Alexandrov, S. (2021). An analysis of process parameters in the hydroforming of a hemispherical dome made of fiber metal laminate. Applied Composite Materials, 28(3), 685-704. [CrossRef] [Google Scholar]
  14. Sheoran, A. J., & Kumar, H. (2020). Fused Deposition modeling process parameters optimization and effect on mechanical properties and part quality: Review and reflection on present research. Materials Today: Proceedings, 21, 1659-1672. [CrossRef] [Google Scholar]
  15. Hanon, M. M., Zsidai, L., & Ma, Q. (2021). Accuracy investigation of 3D printed PLA with various process parameters and different colors. Materials Today: Proceedings, 42, 3089-3096. [CrossRef] [Google Scholar]
  16. Calignano, F., Lorusso, M., Roppolo, I., & Minetola, P. (2020). Investigation of the mechanical properties of a carbon fibre-reinforced nylon filament for 3D printing. Machines, 8(3), 52. [CrossRef] [Google Scholar]
  17. Mohammadizadeh, M., & Fidan, I. (2021). Tensile performance of 3d-printed continuous fiber-reinforced nylon composites. Journal of Manufacturing and Materials Processing, 5(3), 68. [CrossRef] [Google Scholar]
  18. Saharudin, M. S., Hajnys, J., Kozior, T., Gogolewski, D., & Zmarzły, P. (2021). Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies. Polymers, 13(11), 1671. [CrossRef] [PubMed] [Google Scholar]
  19. Gavali, V. C., Kubade, P. R., & Kulkarni, H. B. (2020). Mechanical and thermo-mechanical properties of carbon fiber reinforced thermoplastic composite fabricated using fused deposition modeling method. Materials Today: Proceedings, 22, 1786-1795. [CrossRef] [Google Scholar]
  20. Mei, H., Ali, Z., Yan, Y., Ali, I., & Cheng, L. (2019). Influence of mixed isotropic fiber angles and hot press on the mechanical properties of 3D printed composites. Additive Manufacturing, 27, 150-158. [CrossRef] [Google Scholar]
  21. Akhoundi, B., & Behravesh, A. H. (2019). Effect of filling pattern on the tensile and flexural mechanical properties of FDM 3D printed products. Experimental Mechanics, 59(6), 883-897. [CrossRef] [Google Scholar]
  22. Wickramasinghe, S., Do, T., & Tran, P. (2020). FDM-based 3D printing of polymer and associated composite: A review on mechanical properties, defects and treatments. Polymers, 12(7), 1529. [CrossRef] [PubMed] [Google Scholar]
  23. Bhatia, A., & Sehgal, A. K. (2021). Additive manufacturing materials, methods and applications: A review. Materials Today: Proceedings. [Google Scholar]
  24. Kumar, P., Mahamani, A., & Prasad, B. D. (2020). Additive Manufacturing - A Literature Review. Materials Science Forum, 979, 74–83., [CrossRef] [Google Scholar]
  25. Zhang, H., Yang, D., & Sheng, Y. (2018). Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study. Composites Part B: Engineering, 151, 256-264. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.