Open Access
| Issue |
E3S Web Conf.
Volume 431, 2023
XI International Scientific and Practical Conference Innovative Technologies in Environmental Science and Education (ITSE-2023)
|
|
|---|---|---|
| Article Number | 06030 | |
| Number of page(s) | 8 | |
| Section | Industrial Innovation and Decarbonization | |
| DOI | https://doi.org/10.1051/e3sconf/202343106030 | |
| Published online | 13 October 2023 | |
- E. N. Kablov, New Generation Materials and Technologies for Their Digital Processing. Her. Russ. Acad. Sci., 90 (2020). 10.1134/S1019331620020124 [Google Scholar]
- A. T. Marques, Fibrous materials reinforced composites production techniques (2011) doi:10.1016/B978-1-84569-558-3.50007-7 [Google Scholar]
- A. E. Kolosov, I. A. Repelis, V. G. Khozin, et al, Impregnation of fibrous fillers with polymer binders. 2. Effect of the impregnation regimes on the strength of the impregnated fillers. Mech Compos. Mater., 24 (1988) doi:10.1007/BF00606611 [Google Scholar]
- V. V. Sokolov, P. Yu. Antipov, O. A. Golishev, S. V. Dolinsky, Effect of number of layers of the reinforcing material on the thickness and weight characteristics of carbon fiber parts produced by vacuum infusion. Plasticheskie massy, 1-2, 62-64 (2021) doi:10.35164/0554-2901-2021-1-2-62-64 [CrossRef] [Google Scholar]
- S. V. Baranovsk, L. Z. Yar, Optimization of the fin structure from polymer composite materials using bioinspired structural layouts. Civil Aviation High Technologies, 26(2) (2023) 10.26467/2079-0619-2023-26-2-37-48 [CrossRef] [Google Scholar]
- W. D. Callister, Materials Science and Engineering: An Introduction, 7th Edition. (2006) [Google Scholar]
- D. S. Alexandrova, M. V. Bogdanovskaya, A. S. Yegorov, Y. S. Vygodsky, Development of new composite materials for 3D printing based on polyimide binders and continuous carbon fiber. Transactions of the Krylov state research centre, 2 (2021) doi:10.24937/2542-2324-2021-2-S-I-97-107 [Google Scholar]
- P. Jagadeesh, P. Madhu M. R. Sanjay, A. Karfidov, S. Gorbatyuk, A. Khan, M. Doddamani, S. Siengchin, A comprehensive review on 3D printing advancements in polymer composites: technologies, materials, and applications. Int. J. Adv. Manuf. Technol (2022) doi:121. 10.1007/s00170-022-09406-7 [Google Scholar]
- W. Y. Yeong, G. D. Goh, 3D Printing of Carbon Fiber Composite: The Future of Composite Industry? Matter., 2, 1361-1363 (2020) doi:10.1016/j.matt.2020.05.010 [CrossRef] [Google Scholar]
- B. Sørensen, H. Lilholt, Fiber pull-out test and single fiber fragmentation test - analysis and modelling. IOP Conference Series: Materials Science and Engineering, 139, 012009 (2016). doi:10.1088/1757-899X/139/1/012009. [CrossRef] [Google Scholar]
- YU. A. Gorbatkina, Adgezionnaya prochnost' v sistemah polimer — volokno (Adhesion strength in polymer-fiber systems), Moscow, Himiya (1987) [Google Scholar]
- H. Liebowitz, ed, Fracture: An advance treatise, Fracture of nonmetals and composites. N.Y.: Academic Press, 7 (1972) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.