Ways to increase the efficiency of the seed linting process

Open Access

Issue		E3S Web Conf. Volume 434, 2023 4^th International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2023)


Article Number		03021
Number of page(s)		8
Section		Agricultural Engineering
DOI		https://doi.org/10.1051/e3sconf/202343403021
Published online		12 October 2023

R. Sulaymonov, U. Norboev, Investigation of the Effect of Linter Mixer Blade on Seed Lintering Process, International Journal on Orange Technology 4, 70–76 (2022) [Google Scholar]
S. Novruzov, A. Djuraev, I. Abbazov, N. Toshpulatov, K. Aripov, Friction force determination between the inclined piles of the cotton gin drum from small impurities and seed of the fiber, E3S Web of Conferences 377, 03015 (2023) [CrossRef] [EDP Sciences] [Google Scholar]
I. Abbazov, A. Usmankulov, B. Sharopov, Investigation of local resistance and air velocity in narrowing pipes for the transport of fibrous materials, IOP Conference Series: Earth and Environmental Science 1142(1), 012093 (2023) [CrossRef] [Google Scholar]
A. Sczostak, Cotton Linters: An Alternative Cellulosic Raw Material, Macromolecular Symposia 280(1), 45–53 (2010) [Google Scholar]
I. Abbazov, M. Khodjiev, A. Salimov, F. Egamberdiyev, Investigation of air velocity in expanding and contracting pipes for the transport of fibrous materials, IOP Conference Series: Earth and Environmental Science 1142(1), 012101 (2023) [CrossRef] [Google Scholar]
A. Usmankulov, A. Salomov, I. Abbazov, F. Egamberdiev, Creation of improved UXK equipment for cleaning cotton from large impurities, IOP Conference Series: Earth and Environmental Science 1142(1), 012080 (2023) [CrossRef] [Google Scholar]
R.Sh. Sulaymonov, U.A. Norboev, Research on the effectiveness of 5lp linter, Electronic J Actual Problems of Modern Science, Education and Training 12, 78–84 (2021) [Google Scholar]
F. Egamberdiev, K. Jumaniyazov, I. Abbazov, H. Yodgorova, Theoretical study of the effect of improving cleaning efficiency and fiber quality from a double-drum fiber cleaner, IOP Conference Series: Earth and Environmental Science 1142(1), 012088 (2023) [CrossRef] [Google Scholar]
A.Z. Mamatov, A.K. Usmankulov, I.Z. Abbazov, U.A. Norboyev, E.T. Mukhametshina, Determination of Temperature of Components of Cotton-Raw Material in a Drum Dryer with a Constant, IOP Conference Series: Earth and Environmental Science 939(1), 012052 (2021) [CrossRef] [Google Scholar]
A. Patti, G. Cicala, D. Acierno, Eco-Sustainability of the Textile Production: Waste Recovery and Current Recycling in the Composites World, Polymers 13(1), 134 (2020). [CrossRef] [PubMed] [Google Scholar]
U. Norboyev, R. Sulaymonov, B. Sharopov, Trial results for the production of the improved 5LP linter, IOP Conference Series: Earth and Environmental Science 1142(1), 012096 (2023) [CrossRef] [Google Scholar]
R.C. Young, R.A. Rusca, Saw tooth opener for opening fiber material, especially cotton, Patent DE1114127B, Hergeth KG Maschinenfabrik und Apparatebau, Germany (1961) [Google Scholar]
S. Ergashev, K. Sharipov, O. Sarimsakov, Improvement of the Process of Separation of Cotton Fiber from Seeds, Engineering 14, 567–577 (2022) [CrossRef] [Google Scholar]
D. Tokel, I. Dogan, A. Hocaoglu-Ozyigit, I.I. Ozyigit, Cotton Agriculture in Turkey and Worldwide Economic Impacts of Turkish Cotton, Journal of Natural Fibers 19, 10648–10667 (2022) [CrossRef] [Google Scholar]
R.K. Byler, Historical Review on the effect of moisture content and the addition of moisture to seed cotton before ginning on fiber length, Journal of Cotton Science 10, 300–310 (2006) [Google Scholar]
I. Onal, E. Aykas, H. Yalcin, Cotton production of main and second crop established from seedlings in Aegean region, Journal of Agricultural Machinery Science 5, 323–336 (2009) [Google Scholar]
E.G. Kedisso, J. Guenthner, K. Maredia, T. Elagib, B. Oloo, S. Assefa, Sustainable access of quality seeds of genetically engineered crops in Eastern Africa - Case study of Bt Cotton, GM Crops & Food 14(1), 1–23 (2023) [CrossRef] [Google Scholar]
M.M. Ochilov, Sh.Sh. Khakimov, Machine for separating lint from ginned seeds, Universum: Engineering Sciences 55, 16–18 (2018) [Google Scholar]
R.Sh. Sulaymonov, Х.S. Usmanov, S.T. Tuxtabaev, F.O. Egamberdiy, U.A. Norboev, Improvement of the main unit of the linter working chamber, UNIVERSUM: Engineering Science 96, 5–10 (2022) [Google Scholar]
M. Numonov, Results of research on the development of a 5lp linter with an improved agitator paddle, UNIVERSUM: Engineering Science 109, 44–48 (2023) [Google Scholar]
B.M. Mardonov, R.S. Sulaymonov, U.A. Norboev, G.N. Norboyeva, Study of the movement of seeds between the turner blades and the saw cylinder, Electronic J Actual Problems of Modern Science, Education and Training 9, (2022) [Google Scholar]
O’zDst 601:2016, Technical seed of cotton, Technical conditions, Fertility determination methods, Tashkent (2016) [Google Scholar]
O’zDst 597:2016, Technical seed of cotton, Technical conditions, Methods for determining the mass fraction of defects in seed, Tashkent (2011) [Google Scholar]
O’zDst 662:2011, Cotton wool, Technical conditions, Mass fraction of impurity mixtures and whole seeds, Tashkent (2011) [Google Scholar]
R.Sh. Sulaymonov, U.A. Norboev, G.N. Norboeva, Problems in textile and light industry in the context of integration of science and production and ways to overcome them, International Conference on Innovative Technology of the Seed Linting Process, Namangan Institute of Engineering and Technology, Namangan (2022) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.