Open Access
Issue
E3S Web Conf.
Volume 437, 2023
The 5th International Conference on Green Environmental Engineering and Technology (IConGEET2023)
Article Number 04002
Number of page(s) 16
Section Green Manufacturing and Technologies
DOI https://doi.org/10.1051/e3sconf/202343704002
Published online 16 October 2023
  1. C. Gunasekara, M. Sandanayake, Z. Zhou, D. W. Law, and S. Setunge, Constr. Build. Mater. 253, 119205 (2020) [CrossRef] [Google Scholar]
  2. Y. X. Tang, Y. H. Lee, M. Amran, R. Fediuk, N. Vatin, A. B. Kueh, and Y. Y. Lee, Sustain. 14, (2022) [Google Scholar]
  3. K. Zerfu and J. J. Ekaputri, Mater. Sci. Forum 841, 162 (2016) [CrossRef] [Google Scholar]
  4. V. K. J. Bohra, R. Nerella, and S. R. C. Madduru, Mater. Today Proc. 19, 2617 (2019) [CrossRef] [Google Scholar]
  5. J. M. Paris, J. G. Roessler, C. C. Ferraro, H. D. DeFord, and T. G. Townsend, J. Clean. Prod. 121, 1 (2016) [CrossRef] [Google Scholar]
  6. V. Vivian Assaad Abdelmseeh, J. C. Jofriet, C. Jan, S. C. Negi, C. Satish, G. L. Hayward, and L. Gordon, (2005) [Google Scholar]
  7. Y. Ding, J.-G. Dai, and C.-J. Shi, Constr. Build. Mater. 127, 68 (2016) [CrossRef] [Google Scholar]
  8. M. Wasim, A. Abadel, B. H. Abu Bakar, and I. M. H. Alshaikh, Case Stud. Constr. Mater. 17, e01318 (2022) [Google Scholar]
  9. M. Rajendran and N. Soundarapandian, J. Sci. Eng. Compos. Mater. 22, 331 (2013) [Google Scholar]
  10. V. Sreevidya, R. Anuradha, R. Venkatasubramani, and S. Yuvaraj, (2014) [Google Scholar]
  11. P. Mathapati, R. Babu, and M. U. Aswath, Int. J. Res. Eng. Technol. 5, 165 (2016) [Google Scholar]
  12. S. S. Hiremath, Int. J. Appl. Eng. Res. 13, 284 (2018) [Google Scholar]
  13. M. Ramalingam, P. Mohan, P. Kathirvel, and G. Murali, Materials (Basel). 15, 5477; (2022) [CrossRef] [Google Scholar]
  14. D. Sakkarai and N. Soundarapandian, Adv. Civ. Eng. 2021, 2311518 (2021) [Google Scholar]
  15. A. I. Al-Hadithi, K. I. Aziz, and M. T. N. Al-Dulaimi, Adv. Mater. Res. 925, 3 (2014) [CrossRef] [Google Scholar]
  16. S. Nagan and R. Mohana, Iran. J. Sci. Technol. Trans. Civ. Eng. 38, 223 (2014) [Google Scholar]
  17. S. S. Arun Kumar, A. Madhavan, and S. Dharmar, SSRG Int. J. Civ. Eng. 278 (2017) [Google Scholar]
  18. S. Karunanithi, Adv. Civ. Eng. 2017, 9210968 (2017) [Google Scholar]
  19. N. Altay Eren, Constr. Build. Mater. 346, 128351 (2022) [CrossRef] [Google Scholar]
  20. W. K. Alsaraj and S. H. Fadhil, Period. Eng. Nat. Sci. 8, 1716 (2020) [Google Scholar]
  21. S. H. Mohmmad, M. E. Gülşan, and A. Çevik, Arab. J. Sci. Eng. (2022) [Google Scholar]
  22. S. H. Mohmmad, M. E. Gülşan, and A. Çevik, Adv. Struct. Eng. 25, 453 (2022) [CrossRef] [Google Scholar]
  23. P. Pavithra, M. Srinivasula Reddy, P. Dinakar, B. Hanumantha Rao, B. K. Satpathy, and A. N. Mohanty, J. Clean. Prod. 133, 117 (2016) [CrossRef] [Google Scholar]
  24. A. Naghizadeh and S. O. Ekolu, Constr. Build. Mater. 202, 704 (2019) [CrossRef] [Google Scholar]
  25. M. T. Junaid, O. Kayali, and A. Khennane, in Int. Conf. Eng. Appl. Sci. Beijing. Oxford Univ. Press. Oxford (2012), pp. 139–152 [Google Scholar]
  26. M. I. A. Aleem and P. D. Arumairaj, Indian J. Sci. Technol. 5, 2299 (2012) [Google Scholar]
  27. R. Anuradha, V. Sreevidya, R. Venkatasubramani, and B. Vv. Rangan, ASIAN J. Civ. Eng. (BUILDING HOUSING) 13, 357 (2012) [Google Scholar]
  28. T. Xie, P. Visintin, X. Zhao, and R. Gravina, Constr. Build. Mater. 256, 119380 (2020) [CrossRef] [Google Scholar]
  29. T. Phoo-ngernkham, C. Phiangphimai, N. Damrongwiriyanupap, S. Hanjitsuwan, J. Thumrongvut, and P. Chindaprasirt, Adv. Mater. Sci. Eng. 2018, 2460403 (2018) [CrossRef] [Google Scholar]
  30. S. V Patankar, Y. M. Ghugal, and S. S. Jamkar, in edited by V. Matsagar (Springer India, New Delhi, 2015), pp. 1619–1634 [Google Scholar]
  31. C. Luan, X. Shi, K. Zhang, N. Utashev, F. Yang, J. Dai, and Q. Wang, Constr. Build. Mater. 272, 121612 (2021) [CrossRef] [Google Scholar]
  32. M. S. Reddy, P. Dinakar, and B. H. Rao, J. Build. Eng. 20, 712 (2018) [CrossRef] [Google Scholar]
  33. J. R. Yost, A. Radlińska, S. Ernst, and M. Salera, Mater. Struct. 46, 435 (2013) [CrossRef] [Google Scholar]
  34. V. Ramesh and D. K. Srikanth, E3S Web Conf. 184, (2020) [Google Scholar]
  35. N. Li, C. Shi, Z. Zhang, H. Wang, and Y. Liu, Compos. Part B Eng. 178, 107490 (2019) [CrossRef] [Google Scholar]
  36. M. I. A. Aleem and P. D. Arumairaj, Int. J. Eng. Sci. Emerg. Technol. 1, 118 (2012) [Google Scholar]
  37. S. Chitrala, G. J. Jadaprolu, and S. Chundupalli, Case Stud. Constr. Mater. 8, 172 (2018) [Google Scholar]
  38. M. Venu and T. D. Gunneswara Rao, Slovak J. Civ. Eng. 26, 30 (2018) [CrossRef] [Google Scholar]
  39. Y.-T. Wang LangAU Li, LeiAU Cheng, BaoquanAU Zhang, YonggangAU Wei, Materials (Basel). 13, (2020) [Google Scholar]
  40. D. B. Kumarappa and S. Peethamparan, J. Build. Eng. 32, 101595 (2020) [CrossRef] [Google Scholar]
  41. B. Zhang, H. Zhu, F. Li, Z. Dong, and P. Zhang, Constr. Build. Mater. 299, 123886 (2021) [CrossRef] [Google Scholar]
  42. R. J. Thomas and S. Peethamparan, Constr. Build. Mater. 93, 49 (2015) [CrossRef] [Google Scholar]
  43. X. Yuan, H. Guan, and Y. Shi, Adv. Civ. Eng. 2021, 7951646 (2021) [Google Scholar]
  44. L. Xin, X. Jin-yu, L. Weimin, and B. Erlei, Mater. Lett. 124, 310 (2014) [CrossRef] [Google Scholar]
  45. M. Talha Junaid, O. Kayali, and A. Khennane, Mater. Struct. 50, 50 (2016) [Google Scholar]
  46. K.-H. Yang, J.-K. Song, and K.-H. Lee, J. Korea Concr. Inst. 23, 765 (2011) [CrossRef] [Google Scholar]
  47. A. M. Fernandez-Jimenez, A. Palomo, and C. Lopez-Hombrados, ACI Mater. J. 103, 106 (2006) [Google Scholar]
  48. M. T. Junaid, A. Khennane, and O. Kayali, in 2nd Int. Conf. Adv. Cem. Concr. Technol. Africa. Tanzania (2016), pp. 301–308 [Google Scholar]
  49. X. Cong, W. Zhou, and M. Elchalakani, Constr. Build. Mater. 240, 117977 (2020) [CrossRef] [Google Scholar]
  50. V. S. Athira, V. Charitha, G. Athira, and A. Bahurudeen, J. Clean. Prod. 286, 125429 (2021) [CrossRef] [Google Scholar]
  51. A. Bisarya, R. K. Chouhan, M. Mudgal, and S. S. Amritphale, Int. J. Innov. Res. Sci. Eng. Technol 4, 12178 (2015) [Google Scholar]
  52. S. Chowdhury, S. Mohapatra, A. Gaur, G. Dwivedi, and A. Soni, Mater. Today Proc. 46, 5687 (2021) [CrossRef] [Google Scholar]
  53. M. A. B. Mohd and K. N. I, J. Eng. Technol. Res. 3, 1 (2011) [Google Scholar]
  54. A. M. M. Al Bakri, H. Kamarudin, M. Bnhussain, I. K. Nizar, and W. I. W. Mastura, J. Asian Sci. Res. 1, 247 (2011) [Google Scholar]
  55. H. Unis Ahmed, L. J. Mahmood, M. A. Muhammad, R. H. Faraj, S. M. A. Qaidi, N. Hamah Sor, A. S. Mohammed, and A. A. Mohammed, Clean. Mater. 5, 100111 (2022) [CrossRef] [Google Scholar]
  56. N. Shehata, O. A. Mohamed, E. T. Sayed, M. A. Abdelkareem, and A. G. Olabi, Sci. Total Environ. 836, 155577 (2022) [CrossRef] [Google Scholar]
  57. M. M. A. Abdullah, K. Hussin, M. Bnhussain, K. N. Ismail, and W. M. W. Ibrahim, Int. J. Pure Appl. Sci. Technol 6, 35 (2011) [Google Scholar]
  58. M. Amran, R. Fediuk, H. S. Abdelgader, G. Murali, T. Ozbakkaloglu, Y. H. Y. H. Lee, and Y. H. Y. H. Lee, J. Build. Eng. 45, 103638 (2022) [CrossRef] [Google Scholar]
  59. M. Amran, S. Debbarma, and T. Ozbakkaloglu, Constr. Build. Mater. 270, 121857 (2021) [CrossRef] [Google Scholar]
  60. A. Siddika, M. R. Amin, M. A. Rayhan, M. S. Islam, M. A. Al Mamun, R. Alyousef, and Y. H. M. Amran, Acta Polytech. 61, 279 (2021) [CrossRef] [Google Scholar]
  61. A. L. Almutairi, B. A. Tayeh, A. Adesina, H. F. Isleem, and A. M. Zeyad, Case Stud. Constr. Mater. 15, e00733 (2021) [Google Scholar]
  62. N. Van Chanh, B. D. Trung, and D. Van Tuan, in 3rd ACF Int. Conf. Vietnam (2008), pp. 235–241 [Google Scholar]
  63. B. J. Sara, R. Kumutha, and K. Vijai, SSRG Int J Civ. Eng 4, 32 (2017) [Google Scholar]
  64. J. L. Provis and J. S. J. Van Deventer, Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM (Springer Science & Business Media, 2013) [Google Scholar]
  65. J. L. Provis, Cem. Concr. Res. 114, 40 (2018) [CrossRef] [Google Scholar]
  66. A. Ahmad and A. Alsaid, Sustain. Struct. Mater. An Int. J. 2, 61 (2019) [Google Scholar]
  67. K. H. Mo, U. J. Alengaram, and M. Z. Jumaat, Constr. Build. Mater. 120, 251 (2016) [CrossRef] [Google Scholar]
  68. T. Luukkonen, Z. Abdollahnejad, J. Yliniemi, P. Kinnunen, and M. Illikainen, Cem. Concr. Res. 103, 21 (2018) [CrossRef] [Google Scholar]
  69. S. N. Fifinatasha, A. M. M. Al Bakri, H. Kamarudin, Y. Zarina, A. R. Rafiza, and J. Liyana, Adv. Environ. Biol. 7, 3835 (2013) [Google Scholar]
  70. F. Farooq, X. Jin, M. Faisal Javed, A. Akbar, M. Izhar Shah, F. Aslam, and R. Alyousef, Constr. Build. Mater. 306, 124762 (2021) [CrossRef] [Google Scholar]
  71. L. K. Turner and F. G. Collins, Constr. Build. Mater. 43, 125 (2013) [CrossRef] [Google Scholar]
  72. B. C. McLellan, R. P. Williams, J. Lay, A. van Riessen, and G. D. Corder, J. Clean. Prod. 19, 1080 (2011) [CrossRef] [Google Scholar]
  73. R. Bajpai, K. Choudhary, A. Srivastava, K. S. Sangwan, and M. Singh, J. Clean. Prod. 254, 120147 (2020) [CrossRef] [Google Scholar]
  74. F. Ameri, S. A. Zareei, and B. Behforouz, J. Build. Eng. 32, 101620 (2020) [CrossRef] [Google Scholar]
  75. Y. H. M. Amran, R. Alyousef, H. Alabduljabbar, and M. El-Zeadani, J. Clean. Prod. 251, 119679 (2020) [CrossRef] [Google Scholar]
  76. R. Bligh and T. Glasby, Concrete 2013, 26th (2013) [Google Scholar]
  77. P. Shoaei, F. Ameri, H. Reza Musaeei, T. Ghasemi, and C. B. Cheah, Constr. Build. Mater. 251, 118991 (2020) [CrossRef] [Google Scholar]
  78. J. Davidovits, in Proc. 99 Int. Conf. (France, 1999) [Google Scholar]
  79. J. T. Gourley, in Mater. 2003 Conf. Adapt. Mater. a Mod. Soc. Sydney, Inst. Mater. Eng. Aust. (2003) [Google Scholar]
  80. S. Wallah and B. V. Rangan, Low-Calcium Fly Ash-Based Geopolymer Concrete: Long-Term Properties (Perth, Australia, 2006) [Google Scholar]
  81. ASTM-D4326, in Annu. B. ASTM Stand. Vol. 05.06 (ASTM American Society for Testing and Materials, West Conshohocken, PA, USA, 2013), p. 4 [Google Scholar]
  82. ASTM-C618, in Annu. B. ASTM Stand. (ASTM American Society for Testing and Materials:, West Conshohocken, PA, USA, 2017), p. 5 [Google Scholar]
  83. FHWA, Fed. Highw. Adm. Mater. Progr. 7 (2020) [Google Scholar]
  84. E. Gomaa, S. Sargon, C. Kashosi, and M. ElGawady, Characterization and Performance of Zero-Cement Concrete (United States, Missouri, 2018) [Google Scholar]
  85. N. A. Lloyd and B. V Rangan, Proc. Second Int. Conf. Sustain. Constr. Mater. Technol. 3, 1493 (2010) [Google Scholar]
  86. A. Palomo, M. W. Grutzeck, and M. T. Blanco, Cem. Concr. Res. 29, 1323 (1999) [CrossRef] [Google Scholar]
  87. X. Ouyang, Y. Ma, Z. Liu, J. Liang, and G. Ye, Minerals 10, (2020) [Google Scholar]
  88. P. R. Vora and U. V Dave, Procedia Eng. 51, 210 (2013) [CrossRef] [Google Scholar]
  89. U. Rattanasak and P. Chindaprasirt, Miner. Eng. 22, 1073 (2009) [CrossRef] [Google Scholar]
  90. ACI-211.1, in Am. Stand. (Southern California, 1996), pp. 1–38 [Google Scholar]
  91. D. Hardjito and B. V. Rangan, Development and Properties of Low-Calcium Fly AshBased Geopolymer Concrete (2005) [Google Scholar]
  92. Z. Hongen, J. Feng, W. Qingyuan, T. Ling, and S. Xiaoshuang, ACI Mater. J. 114, (2017) [Google Scholar]
  93. A. M. and V Dhivya, ACI Mater. J. 114, (n.d.) [Google Scholar]
  94. K.-H. Yang, A.-R. Cho, and J.-K. Song, Constr. Build. Mater. 29, 504 (2012) [CrossRef] [Google Scholar]
  95. N. K. Lee and H. K. Lee, Constr. Build. Mater. 47, 1201 (2013) [CrossRef] [Google Scholar]
  96. P. S. Deb, P. Nath, and P. K. Sarker, Mater. Des. 62, 32 (2014) [CrossRef] [Google Scholar]
  97. C. P., C. T., H. S., and C. T., J. Mater. Civ. Eng. 23, 264 (2011) [CrossRef] [Google Scholar]
  98. T.-N. Pattanapong, C. Prinya, and S. Vanchai, J. Mater. Civ. Eng. 27, 4014198 (2015) [CrossRef] [Google Scholar]
  99. U. Rattanasak, K. Pankhet, and P. Chindaprasirt, Int. J. Miner. Metall. Mater. 18, 364 (2011) [CrossRef] [Google Scholar]
  100. N. Gaurav, P. Yeonho, A. Ali, and A. Pranesh, J. Mater. Civ. Eng. 28, 4016144 (2016) [CrossRef] [Google Scholar]
  101. C. Gunasekara, S. Setunge, and D. W. Law, ACI Struct. J. 114, (2017) [CrossRef] [Google Scholar]
  102. A. R. Kotwal, Y. J. Kim, J. Hu, and V. Sriraman, Int. J. Concr. Struct. Mater. 9, 35 (2015) [CrossRef] [Google Scholar]
  103. P. Nuaklong, P. Jongvivatsakul, T. Pothisiri, V. Sata, and P. Chindaprasirt, J. Clean. Prod. 252, 119797 (2020) [CrossRef] [Google Scholar]
  104. S. A. Bernal, J. L. Provis, V. Rose, and R. Mejía de Gutierrez, Cem. Concr. Compos. 33, 46 (2011) [CrossRef] [Google Scholar]
  105. Concrete Construction Staff, 3 (1983) [Google Scholar]
  106. ASTM-C511, in Annu. B. ASTM Stand. (ASTM American Society for Testing and Materials, West Conshohocken, PA, USA, 2013), p. 3 [Google Scholar]
  107. E. I. Diaz-Loya, E. N. Allouche, and S. Vaidya, ACI Mater. J. 108, 300 (2011) [Google Scholar]
  108. B. Joseph and G. Mathew, Sci. Iran. 19, 1188 (2012) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.