Open Access
| Issue |
E3S Web Conf.
Volume 439, 2023
2023 8th International Conference on Ecological Building and Green Building Material (EBGBM 2023)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 12 | |
| Section | Green Building Material and Material Property Research | |
| DOI | https://doi.org/10.1051/e3sconf/202343902007 | |
| Published online | 27 October 2023 | |
- Shirin, E. N. and R. Behzad, et al. (2015). “Seismic behavior of steel sheathed cold-formed steel shear wall: Experimental investigation and numerical modeling.” Thin-Walled Structures 96. [Google Scholar]
- Fu Zhengbing (2012). Shear capacity analysis of cold-formed thin-walled steel structure residential composite wall, Hefei University of Technology. Master: 73. [Google Scholar]
- Gao Wancheng and Xiao Yan (2014). “A Review of Shear Behavior of Cold-formed Thin-walled Steel Composite Walls.” Architectural Structure Journal 35 (04): 30–40. [Google Scholar]
- GUO Peng and H.E. Baokang et al. (2007). A review of the shear behavior of cold-formed steel column composite walls. The 7th National Symposium on Modern Structural Engineering. Hangzhou, Zhejiang, China: 8. [Google Scholar]
- Li Yuanqi and Liu Fei et al. (2012). “Experimental study on seismic performance of S350 cold-formed thin-walled steel keel composite wall.” Journal of Civil Engineering 45 (12): 83–90. [Google Scholar]
- Ling (2008). Experimental study on shear performance of high strength cold-formed thin-walled steel column single-sided composite wall, Xi 'an University of Architecture and Technology. Master: 70. [Google Scholar]
- Liu Bin and Hao Jiping (2015). “Experimental study on shear behavior of sprayed lightweight mortar-cold-formed thin-walled steel composite wall.” Journal of Civil Engineering 48 (04): 31–41. [Google Scholar]
- Nie Shaofeng and Zhou Tianhua et al. (2007). “Research on simplified calculation method of shear capacity of cold-formed steel composite wall.” Journal of Xi 'an University of Architecture and Technology (Natural Science Edition) (05): 598–604. [Google Scholar]
- Nie Shaofeng and Zhou Tianhua et al. (2008). “Research on lateral stiffness of cold-formed steel composite wall.” Journal of Chongqing University of Architecture (02): 75–79. [Google Scholar]
- Shao Dayu and Hao Jiping (2017). “Finite element analysis of shear performance of sprayed lightweight mortar-cold-formed thin-walled steel composite wall.” Steel structure 32 (12): 1–6 + 21. [Google Scholar]
- Wu Shiying. “Code for seismic test methods of buildings” (JGJ101-96) Introduction [J]. Engineering seismic, 1997 (04): 1–3. [Google Scholar]
- Zhang Enyuan (2021). Research on seismic performance of new light steel-paper straw board composite wall, Northeast Forestry University. Master: 81. [Google Scholar]
- Zhang Xiuhua and Zhang Enyuan et al. (2021). “Axial compression performance of cold-formed thin-walled square steel tube-straw board composite wall.” Science and Technology and Engineering 21 (01): 283–289. [Google Scholar]
- Zhou Tianhua and Shi Yu et al. (2006). “Experimental study on shear capacity of cold-formed steel composite wall.” Journal of Xi 'an University of Architecture and Technology (Natural Science Edition) (01): 83–88. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.