Open Access
Issue
E3S Web Conf.
Volume 453, 2023
International Conference on Sustainable Development Goals (ICSDG 2023)
Article Number 01036
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202345301036
Published online 30 November 2023
  1. Mohammad, Ashif, and Farhana Mahjabeen. “Revolutionizing Solar Energy with AI-Driven Enhancements in Photovoltaic Technology.” BULLET: Jurnal Multidisiplin Ilmu 2, no. 4 (2023): 1174-1187. [Google Scholar]
  2. Awasthi, Ankita, Kuldeep K. Saxena, and Vanya Arun. “Sustainability and survivability in manufacturing sector.” In Modern Manufacturing Processes, pp. 205-219. Woodhead Publishing, 2020. [CrossRef] [Google Scholar]
  3. Olawumi, Matthew A., Bankole I. Oladapo, Omolayo M. Ikumapayi, and John O. Akinyoola. “Waste to wonder to explore possibilities with recycled materials in 3D printing.” Science of The Total Environment (2023): 167109. [CrossRef] [Google Scholar]
  4. Saggu, S., Sakeran, M. I., Zidan, N., Tousson, E., Mohan, A., & Rehman, H. (2014). Ameliorating effect of chicory (Chichorium intybus L.) fruit extract against 4-tert-octylphenol induced liver injury and oxidative stress in male rats. Food and chemical toxicology, 72, 138-146. [CrossRef] [PubMed] [Google Scholar]
  5. Raj, I. Loyola Poul, S. Valanarasu, K. Hariprasad, Joice Sophia Ponraj, N. Chidhambaram, V. Ganesh, H. Elhosiny Ali, and Yasmin Khairy. “Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications.” Optical Materials 109 (2020): 110396. [CrossRef] [Google Scholar]
  6. Kinzler, Robert, Abu Rayhan, and Rajan Rayhan. “Maximizing Sustainability and Environmental Impact Reducegation through Synergistic Integration of Advanced Technologies in Effluent Treatment Plants.” [Google Scholar]
  7. Talebi, Mohammadamin. “Move towards Sustainability and Resiliency: From Industry 4.0 to Industry 5.0.” International journal of industrial engineering and operational research 5, no. 2 (2023): 82-92. [Google Scholar]
  8. K alpana, G., Puligadda Veereswara Kumar, Shadi Aljawarneh, and R. V. Krishnaiah. “Shifted adaption homomorphism encryption for mobile and cloud learning.” Computers & Electrical Engineering 65 (2018): 178-195. [CrossRef] [Google Scholar]
  9. Sharma, D., & Saharan, B. S. (2016). Functional characterization of biomedical potential of biosurfactant produced by Lactobacillus helveticus. Biotechnology Reports, 11, 27-35. [CrossRef] [Google Scholar]
  10. Arora, G. S., & Saxena, K. K. (2023). A review study on the influence of hybridization on mechanical behaviour of hybrid Mg matrix composites through powder metallurgy. Materials Today: Proceedings. [Google Scholar]
  11. Kumar, P. Sai Shravan, and K. Viswanath Allamraju. “A review of natural fiber composites [Jute, Sisal, Kenaf].” Materials Today: Proceedings 18 (2019): 2556-2562. [CrossRef] [Google Scholar]
  12. Vijayan, Dhanasingh Sivalinga, Eugeniusz Koda, Arvindan Sivasuriyan, Jan Winkler, Parthiban Devarajan, Ramamoorthy Sanjay Kumar, Aleksandra Jakimiuk, Piotr Osinski, Anna Podlasek, and Magdalena Daria Vaverková. “Advancements in Solar Panel Technology in Civil Engineering for Revolutionizing Renewable Energy Solutions—A Review.” Energies 16, no. 18 (2023): 6579. [CrossRef] [Google Scholar]
  13. Ninduwezuor-Ehiobu, Nwakamma, Olawe Alaba Tula, Chibuike Daraojimba, Kelechi Anthony Ofonagoro, Oluwaseun Ayo Ogunjobi, Joachim Osheyor Gidiagba, Blessed Afeyokalo Egbokhaebho, and Adeyinka Alex Banso. “EXPLORING INNOVATIVE MATERIAL INTEGRATION IN MODERN MANUFACTURING FOR ADVANCING US COMPETITIVENESS IN SUSTAINABLE GLOBAL ECONOMY.” Engineering Science & Technology Journal 4, no. 3 (2023): 140-168. [CrossRef] [Google Scholar]
  14. Ansari, K. R., Quraishi, M. A., Singh, A., Ramkumar, S., & Obote, I. B. (2016). Corrosion inhibition of N80 steel in 15% HCl by pyrazolone derivatives: electrochemical, surface and quantum chemical studies. RSC advances, 6(29), 24130-24141. [CrossRef] [Google Scholar]
  15. Pon, V. Doni, KS Joseph Wilson, K. Hariprasad, V. Ganesh, H. Elhosiny Ali, H. Algarni, and I. S. Yahia. “Enhancement of optoelectronic properties of ZnO thin films by Al doping for photodetector applications.” Superlattices and Microstructures 151 (2021): 106790. [CrossRef] [Google Scholar]
  16. Hasan, M. M., Shakhawat Hossain, M. Mofijur, Zobaidul Kabir, Irfan Anjum Badruddin, T. M. Yunus Khan, and Esam Jassim. “Harnessing Solar Power: A Review of Photovoltaic Innovations, Solar Thermal Systems, and the Dawn of Energy Storage Solutions.” Energies 16, no. 18 (2023): 6456. [CrossRef] [Google Scholar]
  17. Awasthi, Ankita, Kuldeep K. Saxena, and Vanya Arun. “Sustainable and smart metal forming manufacturing process.” Materials Today: Proceedings 44 (2021): 2069-2079. [CrossRef] [Google Scholar]
  18. Basavapoornima, Ch, T. Maheswari, C. R. Kesavulu, W. Pecharapa, J. Kaewkhao, and C. K. Jayasankar. “Spectral characteristics of Pr3+-doped lead phosphate glasses for optical display device and gain media applications.” In AIP Conference Proceedings, vol. 2279, no. 1. AIP Publishing, 2020. [Google Scholar]
  19. Kurniawan, Tonni Agustiono, Mohd Hafiz Dzarfan Othman, Xue Liang, Hui Hwang Goh, Petros Gikas, Tutuk Djoko Kusworo, Abdelkader Anouzla, and Kit Wayne Chew. “Decarbonization in waste recycling industry using digitalization to promote net-zero emissions and its implications on sustainability.” Journal of environmental management 338 (2023): 117765. [CrossRef] [PubMed] [Google Scholar]
  20. Narkhede, Ganesh, Bhaveshkumar Pasi, Neela Rajhans, and Neela Rajhans. “Industry 5.0 and the future of sustainable manufacturing: A systematic literature review.” Business Strategy & Development (2023). [Google Scholar]
  21. Mendoza, Joan Manuel F., and Dorleta Ibarra. “Technology-enabled circular business models for the hybridisation of wind farms: Integrated wind and solar energy, power-to-gas and power-to-liquid systems.” Sustainable Production and Consumption (2023). [Google Scholar]
  22. Vinoth, S., G. Kanimozhi, K. Hari Prasad, Kumar Harish, E. S. Srinadhu, and N. Satyanarayana. “Enhanced ionic conductivity of electrospun nanocomposite (PVDF‐HFP+ TiO2 nanofibers fillers) polymer fibrous membrane electrolyte for DSSC application.” Polymer Composites 40, no. 4 (2019): 1585-1594. [CrossRef] [Google Scholar]
  23. Ali, Mujahid, Bashir Salah, and Tufail Habib. “Utilizing industry 4.0-related technologies and modern techniques for manufacturing customized products–Smart yogurt filling system.” Journal of Engineering Research (2023): 100144. [CrossRef] [Google Scholar]
  24. Zhang, Jinqiang, Haijun Chen, Xiaoguang Duan, Hongqi Sun, and Shaobin Wang. “Photothermal catalysis: From fundamentals to practical applications.” Materials Today (2023). [Google Scholar]
  25. Vasoya, N. H. “Revolutionizing Nano Materials Processing through IoT-AI Integration: Opportunities and Challenges.” Journal of Materials Science Research and Reviews 6, no. 3 (2023): 294-32 [Google Scholar]
  26. Singh, S., Kumar, V., Dhanjal, D. S., Datta, S., Bhatia, D., Dhiman, J., ... & Singh, J. (2020). A sustainable paradigm of sewage sludge biochar: valorization, opportunities, challenges and future prospects. Journal of Cleaner Production, 269, 122259. [CrossRef] [Google Scholar]
  27. Kumari, Ch Usha, A. Sampath Dakshina Murthy, B. Lakshmi Prasanna, M. Pala Prasad Reddy, and Asisa Kumar Panigrahy. “An automated detection of heart arrhythmias using machine learning technique: SVM.” Materials Today: Proceedings 45 (2021): 1393-1398. [CrossRef] [Google Scholar]
  28. Mahmood, Ayyaz, Tehmina Akram, Chen Shenggui, and Chen Shenggui. “Revolutionizing manufacturing: A review of 4D printing materials, stimuli, and cutting-edge applications.” Composites Part B: Engineering (2023): 110952. [CrossRef] [Google Scholar]
  29. Datta, Esha. “Design Requirements for Smart Vehicles Efficient Carbon Emission Management Framework.” Available at SSRN 4535483 (2023). [Google Scholar]
  30. Marouani, Ismail, Tawfik Guesmi, Badr M. Alshammari, Khalid Alqunun, Ahmed Alzamil, Mansoor Alturki, and Hsan Hadj Abdallah. “Integration of Renewable-Energy-Based Green Hydrogen into the Energy Future.” Processes 11, no. 9 (2023): 2685 [CrossRef] [Google Scholar]
  31. Mondal, Sourav, Saumya Singh, and Himanshu Gupta. “Green entrepreneurship and digitalization enabling the circular economy through sustainable waste management-An exploratory study of emerging economy.” Journal of Cleaner Production 422 (2023): 138433. [CrossRef] [Google Scholar]
  32. Poongodi, M., Sharma, A., Vijayakumar, V., Bhardwaj, V., Sharma, A. P., Iqbal, R., & Kumar, R. (2020). Prediction of the price of Ethereum blockchain cryptocurrency in an industrial finance system. Computers & Electrical Engineering, 81, 106527. [CrossRef] [Google Scholar]
  33. Kandhare, Amit D., Prasad A. Thakurdesai, Pralhad Wangikar, and Subhash L. Bodhankar. “A systematic literature review of fenugreek seed toxicity by using ToxRTool: evidence from preclinical and clinical studies.” Heliyon 5, no. 4 (2019). [Google Scholar]
  34. Okogwu, Casandra, Mercy Odochi Agho, Mojisola Abimbola Adeyinka, Bukola A. Odulaja, Nsisong Louis EyoUdo, Chibuike Daraojimba, and Adeyinka Alex Banso. “EXPLORING THE INTEGRATION OF SUSTAINABLE MATERIALS IN SUPPLY CHAIN MANAGEMENT FOR ENVIRONMENTAL IMPACT.” Engineering Science & Technology Journal 4, no. 3 (2023): 49-65. [CrossRef] [Google Scholar]
  35. Mishra, Vandana, Nikhil Mudgal, Deepak Rawat, Pankaj Poria, Paromita Mukherjee, Udita Sharma, Poonam Kumria et al. “Integrating microalgae into textile wastewater treatment processes: Advancements and opportunities.” Journal of Water Process Engineering 55 (2023): 104128. [CrossRef] [Google Scholar]
  36. Prateek, Soumy, Rajnish Garg, Kuldeep Kumar Saxena, V. K. Srivastav, Hitesh Vasudev, and Nikhil Kumar. “Datadriven materials science: application of ML for predicting band gap.” Advances in Materials and Processing Technologies (2023): 1-10. [CrossRef] [Google Scholar]
  37. Korpi, Alireza Grayeli, Ştefan Ţălu, Mirosław Bramowicz, Ali Arman, Sławomir Kulesza, Bartosz Pszczolkowski, Stanislav Jurečka et al. “Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films.” Materials Research Express 6, no. 8 (2019): 086463. [CrossRef] [Google Scholar]
  38. Datta, Shuvo Dip, Bassam A. Tayeh, Ibrahim Y. Hakeem, and Yazan I. Abu Aisheh. “Benefits and Barriers of Implementing Building Information Modeling Techniques for Sustainable Practices in the Construction Industry— A Comprehensive Review.” Sustainability 15, no. 16 (2023): 12466. [CrossRef] [Google Scholar]
  39. Khan, Faisal, Munawar Nawab Karimi, and Osama Khan. “Exploring the scalability and commercial viability of biosynthesized nanoparticles for cooling panels with the help of Artificial Intelligence and solar energy systems.” Green Technologies and Sustainability 1, no. 3 (2023): 100036 [CrossRef] [Google Scholar]
  40. Panigrahi, Rashmi Ranjan, Avinash K. Shrivastava, Karishma M. Qureshi, Bhavesh G. Mewada, Saleh Yahya Alghamdi, Naif Almakayeel, Ali Saeed Almuflih, and Mohamed Rafik N. Qureshi. “AI Chatbot Adoption in SMEs for Sustainable Manufacturing Supply Chain Performance: A Mediational Research in an Emerging Country.” Sustainability 15, no. 18 (2023): 13743. [CrossRef] [Google Scholar]
  41. Albonico, Engel. “Robotics Engineering: Revolutionizing the World with Intelligent Machines.” (2023). [Google Scholar]
  42. Singh, B., Saxena, K. K., Dagwa, I. M., Singhal, P., & Malik, V. (2023). Optimization Of Machining Characteristics of Titanium-Based Biomaterials: Approach to Optimize Surface Integrity for Implants Applications. Surface Review and Letters, 2340008. [CrossRef] [Google Scholar]
  43. Bhukya, Muralidhar Nayak, and Venkata Reddy Kota. “A quick and effective MPPT scheme for solar power generation during dynamic weather and partial shaded conditions.” Engineering Science and Technology, an International Journal 22, no. 3 (2019): 869-884. [CrossRef] [Google Scholar]
  44. Madasu, Ram. “Research Journal of Multidisciplinary Bulletin.” (2023). [Google Scholar]
  45. Charfeddine, Lanouar, and Mohamed Umlai. “ICT sector, digitization and environmental sustainability: A systematic review of the literature from 2000 to 2022.” Renewable and Sustainable Energy Reviews 184 (2023): 113482. [CrossRef] [Google Scholar]
  46. Alsharari, Nizar Mohammad, and Mohammed S. Aljohani. “The benchmarking implementation and management control process as influenced by interplay of environmental and cultural factors: institutional and contingency perspectives.” Benchmarking: An International Journal (2023). [Google Scholar]
  47. Balaska, Vasiliki, Zoe Adamidou, Zisis Vryzas, and Zisis Vryzas. “Sustainable Crop Protection via Robotics and Artificial Intelligence Solutions.” Machines 11, no. 8 (2023): 774. [CrossRef] [Google Scholar]
  48. Balubaid, Mohammed, and Naif Alsaadi. “Achieving Sustainability in Manufacturing through Additive Manufacturing: An Analysis of Its Enablers.” Sustainability 15, no. 12 (2023): 9504. [CrossRef] [Google Scholar]
  49. Kozlovska, Maria, Stefan Petkanic, Frantisek Vranay, and Frantisek Vranay. “Enhancing Energy Efficiency and Building Performance through BEMS-BIM Integration.” Energies 16, no. 17 (2023): 6327. [CrossRef] [Google Scholar]
  50. kumar Dave, Deep Manish. “ADVANCING MEDICAL DEVICE MANUFACTURING: THE CONVERGENCE OF EDGE COMPUTING AND INDUSTRY 5.0.” [Google Scholar]
  51. Zhang, Hui. “Revolutionizing Digital Marketing Industrial Internet of Things-enabled Supply Chain Management in Smart Manufacturing.” (2024). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.