Open Access
| Issue |
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
|
|
|---|---|---|
| Article Number | 02023 | |
| Number of page(s) | 11 | |
| Section | Material Physics and Chemistry, Carbon Footprint of Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202345802023 | |
| Published online | 07 December 2023 | |
- Anand, K., Journal of Mechanical Engineering and Sciences, 9197-9229 (2022) [Google Scholar]
- Sun, Guifang, et al., Chinese Journal of Mechanical Engineering 35.1, 5 (2022) [Google Scholar]
- Mohsin Khan, K., et.al., Journal of Engineering Materials and Technology 145.4, 041004 (2023) [CrossRef] [Google Scholar]
- Gullipalli, Chaitanya, Nikhil Thawari, and T. V. K. Gupta. “Humping defects in laser based direct metal deposition.” Materials Today: Proceedings (2023). [Google Scholar]
- Li, Lin, Ding Yuan, and Chao Wei. Journal of Laser Applications 35.2 (2023) [Google Scholar]
- Pratt, P., et.al. Metallurgical and Materials Transactions A 39.13, 3155-3163 (2008) [CrossRef] [Google Scholar]
- Ueda, Y. et.al., Welding Deformation and Residual Stress Prevention (1st Edition, Elsevier, Butterworth-Heinemann. – 2012) [Google Scholar]
- Wang, Liang, Sergio D. Felicelli, and Phillip Pratt, Materials Science and Engineering: A 496.1, 234-241 (2008) [CrossRef] [Google Scholar]
- Setien, M. Chiumenti, S. van der Veen, M. San Sebastian, F. Garciandía, A. Echeverría, Computers & Mathematics with Applications 78, 7, 2282-2295 (2019) [CrossRef] [Google Scholar]
- Vrancken Bey. Study of residual stresses in selective laser melting PhD Dissertation. Google Scholar, (2016) [Google Scholar]
- Xuan Liang, L. C., Additive Manufacturing, 471-486, (2018) [Google Scholar]
- Qian Chena, X. L., Additive Manufacturing, 406-418, (2019) [Google Scholar]
- Nils Keller, V. P. New method for fast predictions of residual stress and distortion of AM parts, (2014) [Google Scholar]
- X Liang, L Cheng, Q Chen, Q Yang, A modified method for estimating inherent strains from detailed process simulation for fast residual distortion prediction of single-walled structures fabricated by directed energy deposition., AC To - Additive Manufacturing, (2018) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.