Open Access
| Issue |
E3S Web Conf.
Volume 473, 2024
The 3rd International Conference on Renewable Energy (I-CORE 2023)
|
|
|---|---|---|
| Article Number | 04001 | |
| Number of page(s) | 10 | |
| Section | General Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202447304001 | |
| Published online | 08 January 2024 | |
- S. Wang, K. Yang and K. Chen, An Improved Position-Sensorless Control Method at Low Speed for PMSM Based on High-Frequency Signal Injection into a Rotating Reference Frame. IEEE Access, 2019, pp. 86510-86521. [CrossRef] [Google Scholar]
- A. Benevieri, A. Formentini, Marchesoni, M. Passalacqua and L. Vaccaro, Sensorless Control with Switching Frequency Square Wave Voltage Injection for SPMSM with Low Rotor Magnetic Anisotropy. IEEE Transactions on Power Electronics, 2023, pp. 10060 – 10072. [CrossRef] [Google Scholar]
- B. Han, Y. Shi, X. Song, K. Hong and K. Mao, Initial Rotor Position Detection Method of SPMSM based On New High Frequency Voltage Injection Method. IEEE Transactions on Power Electronics, 2018, pp. 3553–3562. [Google Scholar]
- W. Yang, H. Guo, X. Sun, Y. Wang, S. Riaz and H. Zaman, Wide-Speed-Range Sensorless Control of IPMSM. Electronics, 2022, pp. 1-19. [Google Scholar]
- S. Maekawa, M. Wu and H. Kubota, Position Sensorless Control Method for Permanent Magnet Synchronous Motor Using Speed Observer and Opened Phase Voltage Caused by Magnetic Saliency. IEEJ Journal of Industry Applications, 2019, pp. 875–883. [CrossRef] [Google Scholar]
- G. Wang, M. Valla and J. Solsona, Position Sensorless Permanent Magnet Synchronous Machine Drives—A Review. IEEE Transactions on Industrial Electronics, 2019, pp. 5830-5842. [Google Scholar]
- R. Hosooka and S. Shinnaka, New sensorless vector control of PMSM by discrete-time voltage injection of PWM carrier frequencyHigh-frequency current correlation method, in 2017 IEEE 12th International Conference on Power Electronics and Drive Systems, IEEE Conference Publications. (The Institute of Electrical and Electronics Engineers, Honolulu, HI, USA, 2017) pp. 913-918. [Google Scholar]
- H. Wang, G. Deng, X. Wu and S. Huang, Comparison Between High Frequency Sinusoidal Pulsating Voltage and Minimum-Voltage Vector Injection for Sensorless Control of PMSM Drives, in 2019 22th International Conference on Electrical Machines and Systems, IEEE Conference Publications. (The Institute of Electrical and Electronics Engineers, Harbin, China, 2019) pp. 1-6. [Google Scholar]
- H. Zhang, G. Zhang, W. Shen, G. Wang and D. Xu, Fundamental PWM Excitation Based Low-Speed Sensorless Control Method for PMSM Drives, in 2020 15th IEEE Conference on Industrial Electronics and Applications, IEEE Conference Publications. (The Institute of Electrical and Electronics Engineers, Kristiansand, Norway, 2020) pp. 833-838. [Google Scholar]
- D. Hirakawa, K. Yamamoto and A. Shinohara, Estimated Position Error Compensation Method Taking Impact of Load and Speed into Account in PMSM Position Sensorless Control Based on High Frequency Voltage Injection, in 2020 23rd International Conference on Electrical Machines and Systems, IEEE Conference Publications. (The Institute of Electrical and Electronics Engineers, Hamamatsu, Japan, 2020) pp. 246-251. [Google Scholar]
- W. Li, M. Wu, X. Huang and Z. Li, Improved High Frequency Signal Injection Method Based on Fundamental Current Extraction for Permanent Magnetic Synchronous Motors, in 2021 IEEE 30th International Symposium on Industrial Electronics, IEEE Conference Publications. (The Institute of Electrical and Electronics Engineers, Kyoto, Japan, 2021) pp. 01-06. [Google Scholar]
- K. Rehorik, B. Grothman, A. Elsman, D. Gerling and F. Capponi, Compensation of Saliency Tracking Static Estimation Errors in Sensor Fault Tolerant IPMSM Drives, in IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society, IEEE Conference Publications. (The Institute of Electrical and Electronics Engineers, Singapore, 2020) pp. 901-906. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.