Open Access
Issue
E3S Web Conf.
Volume 578, 2024
XL Siberian Thermophysical Seminar (STS-40)
Article Number 01033
Number of page(s) 6
DOI https://doi.org/10.1051/e3sconf/202457801033
Published online 14 October 2024
  1. M. Novotna, A. Klouzkova, J. Maixner, V. Satava, Preparation of leucite powders with controlled particle size distribution. Ceram.-Silikaty. 49, 252 (2005) [Google Scholar]
  2. W. Holand, V. Rheinberger, E. Apel, C. van’t Hoen, M. Holand, A. Dommann, M. Obrecht, C. Mauth, U. Graf-Hausner, Clinical applications of glass-ceramics in dentistry. J. Mater. Sci: Mater. Med. 17, 1037 (2006). https://doi.org/10.1007/s10856- 006-0441-y [CrossRef] [PubMed] [Google Scholar]
  3. A. Klouzkova, M. Mrazova, M. Kohoutkova, Synthesis of partially stabilized leucite. J. Phys. Chem. Solids. 68, 1207 (2007). https://doi.org/10.1016/j.jpcs.2007.03.055 [CrossRef] [Google Scholar]
  4. Y. Zhang, C. Qu, J. Wu, M. Lu, P. Rao, X. Liu, Synthesis of leucite from potash feldspar. J. Wuhan Univ. Technol. 23, 452 (2008). https://doi.org/10.1007/s11595-007- 4452-4 [CrossRef] [Google Scholar]
  5. K.K. Kelley, S.S. Todd, R.L. Orr, E.G. King, K.R. Bonnickson, Thermodynamic properties of sodium-aluminum and potassium-aluminum silicates. Report of investigations 4955 (U.S. Dept. of the Interior, Bureau of Mines, Washington, D.C., 1953) [Google Scholar]
  6. L.B. Pankratz, High-temperature heat contents and entropies of dehydrated analcite, kaliophilite, and leucite. Report of investigations 7073 (U.S. Dept. of the Interior, Bureau of Mines, Washington, D.C., 1968) [Google Scholar]
  7. K. Hirao, N. Soga, The heat capacity and a phase transition in leucite-type compounds. J. Ceram. Assoc. 90, 390 (1982). https://doi.org/10.2109/jcersj1950.90.1043_390 [CrossRef] [Google Scholar]
  8. R.A. Lange, I.S.E. Carmichael, J.F. Stebbins, Phase transitions in leucite (KAlSi2O6), orthorhombic KAlSiO4, and their iron analogues (KFeSi2O6, KFeSiO4). Am. Mineral. 71, 937 (1986) [Google Scholar]
  9. I.E. Paukov, I.A. Belitsky, B.A. Fursenko, Heat capacity and thermodynamic functions of leucite at low temperatures. Thermochim. Acta. 387, 23 (2002). https://doi.org/10.1016/S0040-6031(01)00820-6 [CrossRef] [Google Scholar]
  10. D.W. Waples, J.S. Waples, A review and evaluation of specific heat capacities of rocks, minerals, and subsurface fluids. Part 1: Minerals and nonporous rocks. Nat. Resour. Res. 13, 97 (2004). https://doi.org/10.1023/B:NARR.0000032647.41046.e7 [CrossRef] [Google Scholar]
  11. D.A. Samoshkin, S.V. Stankus, A.Sh. Agazhanov, Heat capacity of corrosion-resistant refractory alloy ChS88U-VI in the temperature range of 300–1270 K. J. Eng. Thermophys. 32, 692 (2023). https://doi.org/10.1134/S1810232823040033 [CrossRef] [Google Scholar]
  12. D.C. Palmer, M.T. Dove, R.M. Ibberson, B.M. Powell, Structural behavior, crystal chemistry, and phase transitions in substituted leucite: High-resolution neutron powder diffraction studies. Am. Mineral. 82, 16 (1997). https://doi.org/10.2138/am-1997-1-203 [CrossRef] [Google Scholar]
  13. Y. Ito, S. Kuehner, S. Ghose, Phase transitions in leucite determined by high temperature, single crystal X-ray diffraction. Z. Krist.-Cryst. Mater. 197, 75 (1991). https://doi.org/10.1524/zkri.1991.197.14.75 [CrossRef] [Google Scholar]
  14. J.N. Walsh, R.J. Harrison, S.A.T. Redfern, Anelastic behaviour of leucite KAlSi2O6. Mat. Sci. Eng. A. 442, 208 (2006). https://doi.org/10.1016/j.msea.2006.02.233 [CrossRef] [Google Scholar]
  15. G.D. Gatta, N. Rotiroti, T.B. Ballaran, A. Pavese, Leucite at high pressure: Elastic behavior, phase stability, and petrological implications. Am. Mineral. 93, 1588 (2008). https://doi.org/10.2138/am.2008.2932 [CrossRef] [Google Scholar]
  16. M. Novotna, V. Satava, D. Lezal, A. Klouzkova, P. Kostka, Preparation of leucite based materials. Solid State Phenom. 90, 377 (2003). https://doi.org/10.4028/www.scientific.net/SSP.90-91.377 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.