Open Access
Issue |
E3S Web Conf.
Volume 582, 2024
1st International Conference on Materials Sciences and Mechatronics for Sustainable Energy and the Environment (MSMS2E 2024)
|
|
---|---|---|
Article Number | 01003 | |
Number of page(s) | 16 | |
Section | Sustainable and Renewable Energy | |
DOI | https://doi.org/10.1051/e3sconf/202458201003 | |
Published online | 22 October 2024 |
- S. Ikram, K. Rehman, M. Altamash, J. Miraj, Design of Radial Distribution System to Study Load-Flow and Short Circuit Analysis Using ETAP Software. Pak. J. Eng. Technol. 7, 42–49 (2024). https://doi.org/10.51846/vol7iss01pp42-49 [Google Scholar]
- E. Cengiz, C. Yilmaz, E. Yılmaz, H. T. Kahraman, Importance of Power Flow and Load Analysis in Pre-Installation Power Systems. 4 (2019). https://doi.org/10.1109/ISMSIT.2019.8932900 [Google Scholar]
- M. Ghiasi, A detailed study for load flow analysis in distributed power system. Int. J. Ind. Electron. Control Optim. 1, 153–160 (2018). [Google Scholar]
- N. K. Fiasorgbor, Investigating the Effects of Slack Bus Selection in Load Flow Studies: A Comparative Analysis of Robust and Weak Grids. J. Power Energy Eng. 11, 9 (2023). https://doi.org/10.4236/jpee.2023.119001 [CrossRef] [Google Scholar]
- A. Mešanović, U. Münz, C. Ebenbauer, Robust Optimal Power Flow for Mixed AC/DC Transmission Systems with Volatile Renewables. IEEE Trans. Power Syst. 33, 5171–5182 (2018). https://doi.org/10.1109/TPWRS.2018.2804358 [Google Scholar]
- Y. Levron, J. M. Guerrero, Y. Beck, Optimal Power Flow in Microgrids with Energy Storage. IEEE Trans. Power Syst. 28, 3226–3234 (2013). https://doi.org/10.1109/TPWRS.2013.2245925 [CrossRef] [Google Scholar]
- B. Stott, Review of load-flow calculation methods. Proc. IEEE 62, 916–929 (1974). https://doi.org/10.1109/PROC.1974.9544 [CrossRef] [Google Scholar]
- T. Noureddine, L. Djamel, Load flow analysis using Newton-Raphson method in presence of distributed generation. Int. J. Power Electron. Drive Syst. IJPEDS 12, 489–498 (2021). https://doi.org/10.11591/ijpeds.v12.i1.pp489-498 [Google Scholar]
- R. Muzzammel, I. Khail, M. H. Tariq, A. M. Asghar, A. Hassan, Design and Power Flow Analysis of Electrical System Using Electrical Transient and Program Software. Energy Power Eng. 11, 186–199 (2019). https://doi.org/10.4236/epe.2019.114011 [CrossRef] [Google Scholar]
- O. A. Afolabi, W. H. Ali, P. Cofie, J. Fuller, P. Obiomon, E. S. Kolawole, Analysis of the load flow problem in power system planning studies. Energy Power Eng. 7, 509–523 (2015). [CrossRef] [Google Scholar]
- A. M. Eltamaly, A. N. A. Elghaffar, Load flow analysis by Gauss-Seidel method; a survey. Int J Mech Electr Comput Technol IJMEC 2411–6173 (2017). [Google Scholar]
- D. K. Mander, G. S. Virdi, Result analysis on load flow by using Newton Raphson method. Int. J. Adv. Res. Electr. Electron. Instrum. Eng. 6, 5835–5844 (2017). [Google Scholar]
- K. Khamees, N. Badra, A. Y. Abdelaziz, Optimal power flow methods: A comprehensive survey. Int. Electr. Eng. J. IEEJ 7, 2228–2239 (2016). [Google Scholar]
- S. Chatterjee, S. Mandal, A novel comparison of Gauss-Seidel and Newton-Raphson methods for load flow analysis. 2017 International Conference on Power and Embedded Drive Control (ICPEDC), 1–7 (2017). https://ieeexplore.ieee.org/abstract/document/8081050 [Google Scholar]
- N. Berisha, Power quality analysis. Case study for induction motor and 110/35kV substation. PRZEGLĄD ELEKTROTECHNICZNY 1, 122–126 (2023). https://doi.org/10.15199/48.2023.08.21 [CrossRef] [Google Scholar]
- A. Zeggai, F. Benhamida, Power flow and Short circuit of 220 kV Substation using ETAP. 2019 Algerian Large Electrical Network Conference (CAGRE), 1–6 (2019). https://doi.org/10.1109/CAGRE.2019.8713172 [Google Scholar]
- R. A. J. Khan, M. Junaid, M. M. Asgher, Analyses and monitoring of 132 kV grid using ETAP software. 2009 International Conference on Electrical and Electronics EngineeringELECO 2009, I–113 (2009). https://ieeexplore.ieee.org/abstract/document/5355219 [Google Scholar]
- C. J. Soni, P. R. Gandhi, S. M. Takalkar, Design and analysis of 11 KV distribution system using ETAP software. 2015 International Conference on Computation of Power, Energy, Information and Communication (ICCPEIC), 451–456 (2015). https://doi.org/10.1109/ICCPEIC.2015.7259526 [Google Scholar]
- A. Asrari, B. Ramos, Power system protection upgrade at anclote plant a case study in Florida state. 2018 IEEE Texas Power and Energy Conference (TPEC), 1–6 (2018). https://doi.org/10.1109/TPEC.2018.8312091 [Google Scholar]
- H. Al-bayaty, M. S. Kider, O. N. Jasim, A. Shakor, Electrical distribution grid of Kirkuk City: A case study of load flow and short circuit valuation using ETAP. Period. Eng. Nat. Sci. 10, 311–322 (2022). [Google Scholar]
- IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications. https://doi.org/10.1109/IEEESTD.1997.83812 [Google Scholar]
- T. Buchin, Installations électriques: la nouvelle norme NFC 15-100 et ses implications. Install. Électr. Nouv. Norme NFC 15-100 Ses Implic. 217, 23–29 (2003). [Google Scholar]
- Standard NF ISO 8528-3 Recherche Google. Accessed: Sep. 23, 2024. [Online]. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.