Open Access
Issue
E3S Web Conf.
Volume 592, 2024
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2024)
Article Number 03028
Number of page(s) 6
Section Energy Production, Storage, and Distribution
DOI https://doi.org/10.1051/e3sconf/202459203028
Published online 20 November 2024
  1. Obernberger I., Carlsen H., Biedermann F., State of the art and future developments regarding small scale biomass CHP systems with a special focus on ORC and Stirling engine technologies. Int Nordic Bioenergy Conf 2003. [Google Scholar]
  2. Sripakagorn A., Srikam C., Design and performance of a moderate temperature difference Stirling engine. Renew Energy 2011. [Google Scholar]
  3. Murodov, Muzaffar Xabibullayevich. Educational Research in Universal Sciences 2.13 (2023): 467–470. [Google Scholar]
  4. Martinez S., Michaux G., Salagnac P., Bouvier J.L., Micro-combined heat and power systems (micro-CHP) based on renewable energy sources. 2017. [Google Scholar]
  5. Carlsen H., Field test of 40 kW Stirling engine for wood chips. In: 8th ISECO73; 1997. [Google Scholar]
  6. Kalina J., Swierzewski M., Szega M., Simulation based performance evaluation of biomass fired cogeneration plant with ORC. Energy Procedía 2017. [Google Scholar]
  7. Schmidt G., The theory of Lehmann’s calorimetric machine. Z Des Vereines Dtsch Ingenieure 1871. [Google Scholar]
  8. Nabijono’g, Doktorant Murodov Rivojiddin. “PERFORMANCE ANALYSIS OF A PLAT-SOLAR-STIRLING ENGINE” Proceedings of International Conference on Modern Science and Scientific Studies. Vol. 2. No. 10. 2023. [Google Scholar]
  9. Finkelstein T., Optimization of phase angle and volume ratio for Stirling engines. (SAE Tech Paper 1960) [Google Scholar]
  10. Kirkley D.W., Determination of the optimum configuration for a Stirling engine. J Mech Eng Sci 1962. [Google Scholar]
  11. Walker G., An optimization of the principal design parameters of Stirling cycle machines. J Mech Eng Sci 1962. [Google Scholar]
  12. Caetano B.C., Lara I.F., Borges M.U., Sandoval O.R., Valle R.M., A novel methodology on beta-type Stirling engine simulation using CFD. 2019. [Google Scholar]
  13. Senft J.R., Optimum Stirling engine geometry. Int J Energy Res 2002. [Google Scholar]
  14. Hoegel B., Pons D., Gschwendtner M., Tucker A., Sellier M., Thermodynamic peculiarities of alpha-type Stirling engines for low-temperature difference power generation: optimisation of operating parameters and heat exchangers using a third- order model. Proc Inst Mech Eng C: J Mech Eng Sci 2014. [Google Scholar]
  15. Walker G., Stirling engines. (Oxford: Clarendon Press, 1980) [Google Scholar]
  16. Murodov M.X., Murodov R.N., Axmedov A.B., PROSPECTS FOR THE USE OF HEAT TRANSFER FLUIDS IN SOLAR-STIRLING ENERGY SYSTEMS // Economy and society. 108, 5–2 2023. [Google Scholar]
  17. Kongtragool B., Wongwises S., Thermodynamic analysis of a Stirling engine including dead volumes of hot space, cold space and regenerator. (Renew Energy 2006) [Google Scholar]
  18. Kongtragool B., Wongwises S., A review of solar powered Stirling engine and low- temperature differential stirling engines. Renew Sustain Energy Rev 7, 131–154 2003 [CrossRef] [Google Scholar]
  19. Organ A.J., The regenerator and the stirling engine. (London: MEP, 1997) [Google Scholar]
  20. Senft J.R., Ringbom stirling engine. (New York: Oxford University Press, 1993) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.