Open Access
Issue
E3S Web Conf.
Volume 592, 2024
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2024)
Article Number 05010
Number of page(s) 11
Section Mining, Geology, Geodesy, and Environmental Monitoring
DOI https://doi.org/10.1051/e3sconf/202459205010
Published online 20 November 2024
  1. ANSYS Fluent Theory Guide (2022) https://www.ansys.co. [Google Scholar]
  2. Z. Cao et al, Applied Mathematical Modelling 100, 632–655 (2021) doi: 10.1016/j.apm.2021.07.034 [CrossRef] [Google Scholar]
  3. R.R. Craig, M.C. Bampton, AIAA Journal 6(7), 1313–1319 (2012) doi: 10.2514/3.4741 [Google Scholar]
  4. S. Ereiz et al, Engineering Structures 277 (2023) doi: 10.1016/j.engstruct.2022.115458 [CrossRef] [Google Scholar]
  5. I.V. Filimonova et al, Drilling and Oil 11 (2021) [Google Scholar]
  6. Grzegorz Kudra et al, Mechanical Systems and Signal Processing 166 (2022) doi: 10.1016/j.ymssp.2021.108415 [Google Scholar]
  7. K.H.Z. Gahr et al, Experimental study of the effect of microtexturingon oil lubricated ceramic/steel friction pairs 267, 1241–51 (2009) [Google Scholar]
  8. D. Gropper et al, Tribol Int. 94, 509–29 (2016) [CrossRef] [Google Scholar]
  9. H.K. Gurve, R.K. Satankar, Materials Today: Proceedings 51(1), 325–331 (2022) doi: 10.1016/j.matpr.2021.05.416. [CrossRef] [Google Scholar]
  10. C. Guo et al, Tribology International 140 (2019) doi: 10.1016/j.triboint.2019.105879 [Google Scholar]
  11. S.O. Kireev et al, Chem Petrol Eng. 52, 332–338 (2016) doi: 10.1007/s10556-016-0195-4 [CrossRef] [Google Scholar]
  12. C.S. Liu et al, Acta Mech. Sin. 21(5), 451–458 (2005) [CrossRef] [Google Scholar]
  13. G.V. Mikheev, Computer simulation of the dynamics of absolutely solid and elastic systems subjected to small deformations: dissertation of candidate of engineering sciences (Briansk, 2004) [Google Scholar]
  14. M. Mengolini et al, Computer Methods in Applied Mechanics and Engineering 350, 995–1023 (2019) doi: 10.1016/j.cma.2019.02.043 [CrossRef] [Google Scholar]
  15. MSC. Adams/Flex software documentation (2022) http://simcompanion.mscsoftware.com/infocenter/ndex?page=ctent&id=DOC10098&cat=1VMO50&actp=LIS. [Google Scholar]
  16. Z. Nanyang et al, The constant/variable kinematics adjustment of the crosshead and the mold’s stability management in injection molding. Research Article. CC BY 4.0 License (2022) doi: 10.21203/rs.3.rs-2040032/v17 [Google Scholar]
  17. B. Nilsson, P. Hansbo, Int. J. Numer. Methods Fluids 66, 730–41 (2011) [CrossRef] [Google Scholar]
  18. L. Rui et al, Transient tribo-dynamic analysis of crosshead slipper in low-speed marine diesel engines during engine startup 9, 1504–1527 (2020) doi: 10.1007/s40544-020-0433-9 [Google Scholar]
  19. A.A. Shabana, An absolute nodal coordinate formulation for the large rotation and large deformation analysis of flexible bodies, Techn. Rep. No MBS96 1 UIC (Dept. of Mech. Eng. Univ. of Illinois, Chicago, 1996) [Google Scholar]
  20. V. Shcherba et al, Journal of Mechanical Science and Technology 34, 5093–5107 (2020) doi: 10.1007/s12206-020-1113-4 [CrossRef] [Google Scholar]
  21. A.V. Solodovnikov, A.N. Makhneva, Oil and Gas Studies 5, 89–95 (2017) doi: 10.31660/0445-0108-2017-5-89-95 [CrossRef] [Google Scholar]
  22. V. Stepanov et al, IOP Conf. Ser.: Earth Environ. Sci. 403, 012087 (2019) doi: 10.1088/1755-1315/403/1/012087 [CrossRef] [Google Scholar]
  23. H. Tan et al, International Journal of Non-Linear Mechanics 115, 20–40 (2019) doi: 10.1016/j.ijnonlin-mec.2019.04.009 [CrossRef] [Google Scholar]
  24. K.L. Ting et al, J. Mech. Rob. 9(6), 061001 (2017) [CrossRef] [Google Scholar]
  25. Y. Tuyuan et al, Tribology International 175 (2022) doi: 10.1016/j.triboint.2022.107856. [Google Scholar]
  26. B.N. Vasil'ev et al, Fundamentals of design and calculation offriction (South - Russian. State. Tech. University (NPI), Novo-Cherkassk URGPU(NPI), 2013) [Google Scholar]
  27. Z. Xiao et al, Communications in Nonlinear Science and Numerical Simulation 95 (2021) doi: 10.1016/j.cnsns.2020.105631 [CrossRef] [Google Scholar]
  28. W.W.K. Xiang et al, Proc. Inst. Mech. Eng. C: J. Mech. Eng. Sci. 228(18), 3482–3495 (2014) [CrossRef] [Google Scholar]
  29. X. Xiaogang et al, IOP Conf. Series: Earth and Environmental Science 108 (2017) doi: 10.1088/1755-1315/108/2/0220546 [Google Scholar]
  30. Z. Yi et al, Engineering Failure Analysis 45, 142–150 (2014) doi: 10.1016/j.engfailanal.2014.07.005 [CrossRef] [Google Scholar]
  31. A.A. Yudakov, Bulletin of the Udmurt University Mathematics. Mechanics. Computer Science 3, 126–140 (2012) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.