EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 592 (2024) E3S Web Conf., 592 (2024) 05025 References
Open Access
Issue
E3S Web Conf.
Volume 592, 2024
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2024)
Article Number 05025
Number of page(s) 10
Section Mining, Geology, Geodesy, and Environmental Monitoring
DOI https://doi.org/10.1051/e3sconf/202459205025
Published online 20 November 2024
  1. V. A. Kudinov, Dynamics of machines, Moscow: Engineering, 1967, p. 359. [Google Scholar]
  2. I. Tlusty, F. Ismail, Basic non-linearity in machining chatter, Annals of the CIRP, pp. 299–304, 1981. [CrossRef] [Google Scholar]
  3. S.A. Vasin, Cutting of Materials: Thermomechanical Approach to the System of Interrelationships in Cutting, Moscow: Bauman Moscow State Technical University, 2001, p. 447. [Google Scholar]
  4. V.F. Bezyazychny, V.V. Fomenko, Investigation of the influence of technological conditions of machining by turning with cutting tools with wear-resistant coatings on the quality parameters of the surface layer of machine parts, Strengthening technologies and coatings, 19(3), 2017, pp.108–113. [Google Scholar]
  5. Q. Wu, Y. Sun, W. Chen, G. Chen, Theoretical and experimental investigation of spindle axial drift and its effect on surface topography in ultra precision diamond turning, International Journal of Machine Tools and Manufacture, 116, 2017, pp.107–113. [CrossRef] [Google Scholar]
  6. Sun, Y., Shuyang Y., Dynamics identification and stability analysis in turning of slender workpieces with flexible boundary constraints, Mechanical Systems and Signal Processing, 177, 2022, pp.109245. [CrossRef] [Google Scholar]
  7. V.V. Postnov, A.A. Shafikov, Development of the evolutionary model of the cutting tool wear for the machining process control, Vestnik of Ufa State Aviation Technical University, 11(2), 2008, pp. 139–145. [Google Scholar]
  8. V.L. Zakovorotny, A.D. Lukyanov, The problems of control of the evolution of the dynamic system interacting with the medium, International Journal of Mechanical Engineering and Automation, 1(5), 2014, pp. 271–285. [Google Scholar]
  9. V. L. Zakovorotny, V. E. Gvindzhiliya Evolution of the Dynamic Cutting System with Irreversible Energy Transformation in the Machining Zone, Russian Engineering Research, 39(5), 2019, pp. 423–430. [CrossRef] [Google Scholar]
  10. M. Belmonte, F.J. Oliveira, J. Sacramento, A.J.S. Fernandes, R.F. Silva, Cutting forces evolution with tool wear in sintered hardmetal turning with CVD diamond, Diamond and Related Materials, 13, 2004, pp. 843–847. [CrossRef] [Google Scholar]
  11. M. Remadna, J. François Rigal, Evolution during time of tool wear and cutting forces in the case of hard turning with CBN inserts, Journal of Materials Processing Technology, 178, 2006, pp. 67–75. [CrossRef] [Google Scholar]
  12. Cheung, Chi Fai, Wing Bun Lee, Modelling and simulation of surface topography in ultra-precision diamond turning, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214, 2000, pp. 463–480. [CrossRef] [Google Scholar]
  13. D. Qu, P. Zhang, Z. Qiao, D. Wu, B. Wang, A simulation model for predicting three-dimensional surface morphology in ultra-precision roll die turning, The International Journal of Advanced Manufacturing Technology, 86, 2016, 681–689. [CrossRef] [Google Scholar]
  14. Murat Kiyak, Billur Kaner, Determination of the actual deflection of the cutting tool in turning by the Castigliano theorem, Journal of Radiation Research and Applied Sciences, 16(4), 2023, pp.100744. [CrossRef] [Google Scholar]
  15. M. Kiyak, Effect of cutting tool tip position on real cutting tool deflection in turning, Emerging Materials Research, 9(2), 2020, pp. 479–487. [CrossRef] [Google Scholar]
  16. Y.G. Kabaldin, D.A. Shatagin, A.M. Kuzmishina The Development of a Digital Twin of a Cutting Tool for Mechanical Production, Proceedings of Higher Educational Institutions. Machine Building, 4, 2019, pp. 11–17. [CrossRef] [Google Scholar]
  17. Y. Altintas, P. Kersting, D. Biermann, E. Budak, B. Denkena, I. Lazoglu, Virtual process systems for part machining operations, CIRP Annals, 63(2), 2014, pp. 585–605. [CrossRef] [Google Scholar]
  18. Y. Altintas, M. Eynian, H. Onozuka, Identification of dynamic cutting force coefficients and chatter stability with process damping, CIRP Annals, 57(1), 2008, pp.371–374. [CrossRef] [Google Scholar]
  19. Y. Altintas, Tuysuz O. Tuysuz, M. Habibi, Z.L. Li, Virtual compensation of deflection errors in ball end milling of flexible blades, CIRP Annals, 57(1), 2008, pp.371–374. [CrossRef] [Google Scholar]
  20. V. L. Zakovorotny, V. E. Gvindzhiliya, Influence of Spindle Wobble in Turning on the Workpiece S Surface Topology, Russian Engineering Research, 38, 201, pp. 818–823. [Google Scholar]
  21. V.L. Zakovorotny, V.E. Gvindjiliya, Bifurcations of attracting sets of cutting tool deformation displacements at the evolution of treatment process properties, Izvestiya VUZ. Applied Nonlinear Dynamics, 26, no. 5, 2018, pp. 20–38. [CrossRef] [Google Scholar]
  22. V.L. Zakovorotny, V.E. Gvindjiliya, Influence of cutting dynamic on the selection of the technological regimes to ensure minimal wear of cutting tools, Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 22, no. 4, 2020, pp. 54–70. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.