Open Access
Issue |
E3S Web Conf.
Volume 592, 2024
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2024)
|
|
---|---|---|
Article Number | 06025 | |
Number of page(s) | 7 | |
Section | Natural Resource Management, Air Pollution, and Water Treatment | |
DOI | https://doi.org/10.1051/e3sconf/202459206025 | |
Published online | 20 November 2024 |
- Vladimir Zolnikov, Konstantin Zolnikov, Nadezhda Ilina, Kirill Grabovy, Verification methods for complex-functional blocks in CAD for chips deep submicron design standards, E3S Web of Conf. 376 01090 (2023), DOI: 10.1051/e3sconf/202337601090. [CrossRef] [EDP Sciences] [Google Scholar]
- Vladimir Zolnikov, Vyacheslav Reznichenko, Gleb Arakelyan, Lyubov Manukhina, Improving the quality indicators and performance of logical blocks and static memory of the microprocessor as part of improving the energy efficiency of devices, E3S Web Conf. 460 04020 (2023), DOI: 10.1051/e3sconf/202346004020. [CrossRef] [EDP Sciences] [Google Scholar]
- Konstantin Zolnikov, Tatiana Skvortsova, Kristina Zatorkina, Alexander Matusevich, Methodology for designing microcircuits of various levels of CAD description taking into account quality indicators and energy efficient production, E3S Web Conf. 460 04021 (2023), DOI: 10.1051/e3sconf/202346004021. [CrossRef] [EDP Sciences] [Google Scholar]
- Kuznetsov M. & Gusev Pavel & Bredihin, A. & Chizhov M., (2021). Simulation modeling of the automated system tasks of production technical preparation. AIP Conference Proceedings. 2402. 050029. DOI: 10.1063/5.0071461. [CrossRef] [Google Scholar]
- Dmitry Golovin, Andrey Smolyaninov, Dmitriy Degtev, Alexander Matusevich, The use of the digital twin in the design of a prefabricated product E3S Web Conf. 363 04001 (2022) DOI: 10.1051/e3sconf/202236304001. [Google Scholar]
- Golovin Dmitry & Samotin Ivan & Pocebneva Irina & Vasilyeva Olga. (2023). Dialogue system for designing technological processes. E3S Web of Conferences. 376. DOI: 10.1051/e3sconf/202337601094. [Google Scholar]
- Development of mathematical and dynamic logical models in complex special-purpose organizational systems of monitoring environmental health / V. I. Sumin, A. S. Kravchenko, P. Yu. Gusev, T. I. Slepkova // E3S Web of Conferences, St. Petersburg, 19-21 ceHTa6pa 2023 roga. Vol. 460. - St. Petersburg: EDP Sciences, 2023. - P. 09031. - DOI 1O.1O51/e3sconf/2O2346O09O31.-EDN NBZOXY. [CrossRef] [EDP Sciences] [Google Scholar]
- Retraction Note: Calculation of stresses initiated by electrical explosion of conductors in a composite thick-walled cylinder / A. Scherbakov, A. Busakhin, P. Gusev, A. Deniskina // E3S Web of Conferences : XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”, Rostov-on-Don, Russia, 01-05 Mapma 2023 roga. Vol. 413. - Rostov-on-Don, Russia: EDP Sciences, 2023. - P. 04019. - DOI 10.1051/e3sconf/202341304019.-EDNYBDAAT. [Google Scholar]
- Bekhmetyev, V.I., Tereshonkov, V.A., Lepeshkin, V. (2022). VERTICAL CAD in the Design of Efficient Technologies for Making Aircraft Glider Parts. In: Radionov, A.A., Gasiyarov, V.R. (eds) Advances in Automation III. RusAutoCon 2021. Lecture Notes in Electrical Engineering, vol 857. Springer, Cham. https://doi.org/10.1007/978-3-030-94202-1_28. [Google Scholar]
- Valentina Antsiferova, Ekaterina Grosheva, Anna Ivanova, Ivanna Abrosimova, Computer simulation of electrophysical effects in CAD chip design, E3S Web of Conf. 389 07015 (2023), DOI: 10.1051/e3sconf/202338907015. [CrossRef] [EDP Sciences] [Google Scholar]
- Dmitry Golovin, Yury Deniskin, Kirill Sklyarov, Olga Vasilyeva, Development of a technology design model for a science-intensive product, E3S Web Conf. 363 04002 (2022), DOI: 10.1051/e3sconf/202236304002. [CrossRef] [EDP Sciences] [Google Scholar]
- Abyzov, Valery & Deniskin, Yury & Korchagina, Julia & Solovyeva, Elena. (2023). Release of products into circulation on the foreign market, taking into account compliance with the mandatory requirements of the country of destination. E3S Web of Conferences. 458. DOI: 10.1051/e3sconf/202345805035. [Google Scholar]
- Pande, P. P. Machine Learning for CAD/EDA / P. P. Pande // IEEE Design and Test. - 2023. - Vol. 40, No. 1. - P. 4. - DOI: 10.1109/mdat.2022.3227524. - EDN GVUWNB. [Google Scholar]
- Chizhov, M. & Filimonova, A. & Ryzhkov, V. & Bredihin, A. (2021). Algorithms for integration electrical CAD into lifecycle management systems. AIP Conference Proceedings. 2402. 060018. DOI: 10.1063/5.0071392. [CrossRef] [Google Scholar]
- Tatiana Dolgova, Dmitry Durov, Andrey Smolyaninov, Nickolay Linkov, Design forming tooling for manufacturing parts from sheet blanks using digital technologies, E3S Web of Conf. 376 01095 (2023), DOI: 10.1051/e3sconf/202337601095. [CrossRef] [EDP Sciences] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.