EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 596 (2024) E3S Web Conf., 596 (2024) 01042 References
Open Access
Issue
E3S Web Conf.
Volume 596, 2024
International Conference on Civil, Materials, and Environment for Sustainability (ICCMES 2024)
Article Number 01042
Number of page(s) 7
Section Civil, Materials and Environment for Sustainability ICCMES 2024
DOI https://doi.org/10.1051/e3sconf/202459601042
Published online 22 November 2024
  1. Maurice, V., Peng, H., Klein, L.H., Seyeux, A., Zannaa, S. and Marcus, P. “Effects of molybdenum on the composition and nanoscale morphology of passivated austenitic stainless-steel surfaces”. Faraday Discuss, 180, pp. 151–170, 2015. [CrossRef] [PubMed] [Google Scholar]
  2. Marcus, P. and Maurice, V. “Passivity of Metals and Alloys, Materials Science and Technology”. Wiley- VCH Verlag GmbH & Co. KgaA, 2006. [Google Scholar]
  3. Laurent, B., Gruet, N., Gwinner, B., Miserque, F., Rousseau, K. and Ogle, K. “Dissolution and passivation of a silicon-rich austenitic stainless steel during active-passive cycles in sulfuric and nitric acid”. J Electrochem Soc, 164, pp. C892–C900, 2017. [CrossRef] [Google Scholar]
  4. Örnek, C., Reccagni, P., Kivisäkk, U., Bettini, E., Engelberg, D.L. and Pan, J. “Hydrogen embrittlement of super duplex stainless steel— towards understanding the effects of microstructure and strain”. Int J Hydrog Energy, 43, pp. 12543–12555, 2018. [CrossRef] [Google Scholar]
  5. Heo, J., Lee, J., Kim, S., Alfantazi, A., and Cho, S. O. “Corrosion resistance of austenitic stainless steel using cathodic plasma electrolytic oxidation”. Surf Coat Int, 462, 129448, 2023. https://doi.org/10.1016/j.surfcoat.2023.129448. [CrossRef] [Google Scholar]
  6. Laycock, N.J. and Newman, R.C. “Localized dissolution kinetics, salt films, and pitting potentials”. Corro. Sci, 39(10–11), pp. 1771–1790, 1997. [CrossRef] [Google Scholar]
  7. Leckie, H.P. and Uhlig, H.H. “Environmental factors affecting the critical potential for pitting in 18–8 stainless steel”. J Electrochem Soc, 113(12), pp. 1262–1267, 1966. [CrossRef] [Google Scholar]
  8. Llewellyn, D.T. and Hudd, R.C. “Steels: Metallurgy and applications”. 3rd ed., Butterworth-Heinemann, Oxford, UK, 1998. [Google Scholar]
  9. Sedano, J., Curiel, L., Corchado, E., Cal, E. and Villar, J.R. “A soft computing method for detecting lifetime building thermal insulation failures”. Integr Comput.-Aided Eng, 17(2), pp.103–115, 2010. [CrossRef] [Google Scholar]
  10. Sedriks, A.J. “Corrosion of stainless steel”. John Wiley and Sons, New York, 1996. [Google Scholar]
  11. Kadry, S. “Corrosion analysis of stainless steel”. Eur J Sci Res, 22, pp. 508–516, 2008. [Google Scholar]
  12. Hammonds, P. “Chapter 4 An Introduction to Corrosion and its Prevention”. In: Comprehensive Chemical Kinetics, Elsevier, Vol. 28, pp. 233–279, 1989. https://doi.org/10.1016/S0069- 8040(08)70400-X. [CrossRef] [Google Scholar]
  13. Guo, L.Q., Lin, M.C., Qiao, L.J. and Volinsky, A.A. “Duplex stainless-steel passive film electrical properties studied by in situ current sensing atomic force microscopy”. Corros Sci, 78, pp. 55–62, 2014. [CrossRef] [Google Scholar]
  14. Fredriksson, W., Malmgren, S., Gustafsson, T., Gorgoi, M., Edstro¨m, K. “Full depth profile of passive films on 316L stainless steel based on high resolution HAXPES in combination with ARXPS”. Appl Surf Sci 258(15), pp. 5790–5797, 2012. [CrossRef] [Google Scholar]
  15. Williams, D.E., Kilburn, R., Cliff, J. and Waterhouse, G.I.N. “Composition changes around sulphide inclusions in stainless steels, and implications for the initiation of pitting corrosion”. Corros Sci, 52(11), pp. 3702–3716, 2010. [CrossRef] [Google Scholar]
  16. Zarras, P. and Stenger-Smith, J.D. “Chapter 3 – Smart Inorganic and Organic Pretreatment Coatings for the Inhibition of Corrosion on Metals/Alloys, Intelligent Coatings for Corrosion Control”. Butterworth- Heinemann, pp. 59–91, 2015. https://doi.org/10.1016/B978-0-12-411467-8.00003–9. [Google Scholar]
  17. Ahmad, Z. “Chapter 9 – Selection of materials for corrosive environment, Principles of Corrosion Engineering and Corrosion Control”. Butterworth- Heinemann, pp. 479–549 2006. https://doi.org/10.1016/B978075065924–6/50010–6. [CrossRef] [Google Scholar]
  18. Saefuloh, I., Kanani, N., Gumelar Ramadhan, F., Rukmayadi, Y., Yusuf, Y., Abdullah, S. and Susilo.S. “The study of corrosion behavior and hardness of aisi stainless steel 304 in concentration of chloride acid solution and temperature variations”. J Phys Conf Ser, 1477, 052058, 2020. http://www.doi.10.1088/1742-6596/1477/5/052058. [CrossRef] [Google Scholar]
  19. The Atlas Steels Technical Handbook of Stainless Steels, Atlas Steels Technical Department, 2020. https://www.pms-c.com/wp-content/uploads/2012/04/Atlas_Technical_Handbook_rev_July_20101.pdf. [Google Scholar]
  20. Loto, C.A and Loto, R.T. ‘Synergistic effect of tobacco and kola tree extracts on the corrosion inhibition of mild steel in acid chloride’. Int J Elect Sci, 6(9), pp. 3830–3843, 2011. [Google Scholar]
  21. Loto, R.T. ‘Anti-corrosion performance of the synergistic properties of benzenecarbonitrile and 5- bromovanillin on 1018 carbon steel in HCl environment’. Sci Rep, 7(1), 17555, 2017. [CrossRef] [PubMed] [Google Scholar]
  22. Loto, R.T., Olukeye, T. and Okorie, E. ‘Synergistic combination effect of clove essential oil extract with basil and atlas cedar oil on the corrosion inhibition of low carbon steel’. S Afr J Chem Eng, 30, pp. 28–41, 2019. [Google Scholar]
  23. Fajobi M.A., Loto R.T. and Oluwole O.O. ‘Corrosion in Crude Distillation Overhead System: A Review’. J Bio- Tribo-Corros, 5(31), 67, 2019. [CrossRef] [Google Scholar]
  24. Loto, R.T. and Babalola, P. ‘Effect of alumina nano- particle size and weight content on the corrosion resistance of AA1070 aluminum in chloride/sulphate solution’. Results Phys, 10, pp. 731–737, 2018. [CrossRef] [Google Scholar]
  25. T. Hanawa, 1 – Overview of metals and applications, In: Mitsuo Niinomi, Series in Biomaterials, Metals for Biomedical Devices, 2nd Ed., Woodhead Publishing, pp. 3–29, 2019. https://doi.org/10.1016/B978-0-08-102666-3.00001–8. [Google Scholar]
  26. Atlass Steels, Grade Data Sheet, Durinox™ F20S. https://www.atlassteels.com.au/documents/Atlas%20Grade%20datasheet%20F20S%20rev%20May%202008.pdf. [Google Scholar]
  27. Two-Way ANOVA: Interpretation & Examples. https://study.com/learn/lesson/two-way-anovainterpretation-examples.html. Retrieved 22nd May 2023. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.