Comparative analysis of the corrosion resistance data of aluminium alloy 4032 and 4004, magnesium titanium alloy and aluminium vanadium alloy in dilute H2SO4, NaCl and acid chloride solutions

Open Access

Issue		E3S Web Conf. Volume 596, 2024 International Conference on Civil, Materials, and Environment for Sustainability (ICCMES 2024)


Article Number		01043
Number of page(s)		10
Section		Civil, Materials and Environment for Sustainability ICCMES 2024
DOI		https://doi.org/10.1051/e3sconf/202459601043
Published online		22 November 2024

Davis, J.R. “Corrosion of Aluminum and Aluminum Alloys”. ASM International, 1999. [CrossRef] [Google Scholar]
Long, R.S., Boettcher, E. and Crawford, D. “Current and future uses of aluminum in the automotive industry”. JOM. 69(12), pp. 2635–2639, 2017. [CrossRef] [Google Scholar]
Birbilis, N.T., Muster, NT. and Buchheit, R. G. “Corrosion of Aluminum Alloys, in Corrosion Mechanisms in Theory and Practice”. 3^rd Ed., CRC Press, pp. 705–736, 2011. [Google Scholar]
Zhang, Z., Yang, X., Zhang, J., Zhou, G., Xu, X. and Zou, B. “Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy”. Mater Des, 32, pp. 4461–4470, 2011. [CrossRef] [Google Scholar]
Callister, W.D. and Rethwisch, D.G. “Materials Science and Engineering: An Introduction”. 9^th Ed., Wiley, 2013. [Google Scholar]
Loto, R.T. and Babalola, P. “Corrosion polarization behavior and microstructural analysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations”. Cogent Eng, 4(1), 1422229, 2017. [CrossRef] [Google Scholar]
Loto, R.T. “Investigation of the influence of SiC content and particle size variation on the corrosion resistance of Al-SiC matrix composite in neutral chloride solution”. Int J Adv Manuf Tech, 101(9–12), pp. 2407–2413, 2019. https://doi.org/10.1007/s00170-018-3137-9. [CrossRef] [Google Scholar]
Loto, R.T. and Babalola, P. “Corrosion resistance of low SiC particle variation at low weight content on 1060 aluminum matrix composite in sulfate- contaminated seawater”. Results Phys, 13102241, 2019. [Google Scholar]
Nam, N.D., Phung, V.D., Thuy, P.T.P., Dao, V.A., Kim, S.H. and Yi, J.S. “Corrosion behaviours of hot- extruded Al-xMg alloys”. J Mater Res, 2019. https://doi.org/10.1016/j.jmrt.2019.08.047. [Google Scholar]
Rana, R.S., Purohit, R. and Das, S. “Reviews on the influences of alloying elements on the microstructure and mechanical properties of aluminum alloys and aluminum alloy composites”. Int J Sci Res, 2(6), pp. 1–7, 2012. [Google Scholar]
Natishana, P.M. and O’Grady, W.E. “Chloride ion interactions with oxide-covered aluminum leading to pitting corrosion: A Review”. J Electrochem Soc,161(9), pp. C421∓C432, 2014. [CrossRef] [Google Scholar]
Hou, X., Gao, L., Cui, Z. and Yin, J. “Corrosion and Protection of Metal in the Seawater Desalination”. IOP Conf Ser Earth Environ Sci, 108, 022037, 2018. [CrossRef] [Google Scholar]
Loto, C.A., Joseph, O.O. and Loto, R.T. ‘Adsorption and inhibitive properties of Camellia Sinensis for aluminium alloy in HCI’. Int J Elect Sci, 9(7), pp. 3637–3649, 2014. [Google Scholar]
Loto, R.T. ‘Anti-corrosion performance of the synergistic properties of benzenecarbonitrile and 5- bromovanillin on 1018 carbon steel in HCl environment’. Sci Rep, 7(1), 17555, 2017. [CrossRef] [PubMed] [Google Scholar]
Loto, R.T., Olukeye, T. and Okorie, E. ‘Synergistic combination effect of clove essential oil extract with basil and atlas cedar oil on the corrosion inhibition of low carbon steel’ S Afr J Chem Eng, 30, pp. 28–41, 2019. [Google Scholar]
Fajobi M.A., Loto R.T. and Oluwole O.O. ‘Corrosion in Crude Distillation Overhead System: A Review’. J Bio- Tribo-Corros, 5(31), 67, 2019. [CrossRef] [Google Scholar]
Loto, R.T. and Babalola, P. ‘Effect of alumina nano- particle size and weight content on the corrosion resistance of AA1070 aluminum in chloride/sulphate solution’ Results Phys, 10, pp. 731–737, 2018. [CrossRef] [Google Scholar]
Fang, H.H.P., Wu, K.K., Yeong, C.L.Y. “Corrosion of construction metals under simulated acid rain/fog conditions with high salinity”. Water, Air, Soil Pollut, 53(3–4), pp. 315–325, 1990. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.