EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 491 (2024) E3S Web Conf., 491 (2024) 02007 References
Open Access
Issue
E3S Web Conf.
Volume 491, 2024
International Conference on Environmental Development Using Computer Science (ICECS’24)
Article Number 02007
Number of page(s) 10
Section Smart Systems for Environmental Development
DOI https://doi.org/10.1051/e3sconf/202449102007
Published online 21 February 2024
  1. Gugulothu, B., Sankar, S. L., Vijayakumar, S., Prasad, A. S. V., Thangaraj, M., Venkatachalapathy, M., & Rao, T. V. J. (2022). “Analysis of wear behaviour of AA5052 alloy composites by addition alumina with zirconium dioxide using the Taguchi-grey relational method”, Advances in Materials Science and Engineering, 2022, 1–7. https://doi.org/10.1155/2022/4545531 [Google Scholar]
  2. Pal, D., Vijayakumar, S., Rao, T. V. J., & Babu, R. S. R. (2022). “An examination of the tensile strength, hardness and SEM analysis of Al 5456 alloy by addition of different percentage of SiC/flyash”,Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.02.288 [Google Scholar]
  3. Ravichandran, M. Meignanamoorthy, M., G. P. Chellasivam, J. Vairamuthu, A. S. Kumar, and B. Stalin, “Effect of Stir Casting Parameters on Properties of Cast Metal Matrix Composite,” Mater. Today Proc., vol. 22, pp. 2606–2613, 2019, doi: 10.1016/j.matpr.2020.03.391. [CrossRef] [Google Scholar]
  4. Ghouse Mohiddin, S., & Venkatesh, S. (2022). Influence of reinforcement on weld bead characteristics of friction stir processed Al5083/NFA composite. Materials Today: Proceedings, 56, 1614–1617. https://doi.org/10.1016/j.matpr.2022.02.651 [CrossRef] [Google Scholar]
  5. Sharma, P., Paramasivam, P., Bora, B. J., & Sivasundar, V. (2023). Application of nanomaterials for emission reduction from diesel engines powered with waste cooking oil biodiesel. International Journal of Low-Carbon Technologies, 18, 795–801. https://doi.org/10.1093/ijlct/ctad060 [CrossRef] [Google Scholar]
  6. Vijayakumar, S., Arunkumar, A., Pradeep, A., Satishkumar, P., Singh, B., Rama Raju, K. S., & Sharma, V. K. (2023). Optimization of process variables for shielded metal arc welding dissimilar mild steel and medium carbon steel joints. Journal of Adhesion Science and Technology, 1–18. https://doi.org/10.1080/01694243.2023.2227461 [Google Scholar]
  7. Singh, R., Shadab, M., & Rai, R. N. (2018). Optimization of machining process parameters in conventional turning operation of Al5083/B4C composite under dry condition. Materials Today: Proceedings, 5(9), 19000–19010. https://doi.org/10.1016/j.matpr.2018.06.251 [CrossRef] [Google Scholar]
  8. Alizadeh, A., Khayami, A., Karamouz, M., & Hajizamani, M. (2022). Mechanical properties and wear behavior of Al5456matrix composites reinforced with high amounts of SiC particles fabricated by combined stir casting and squeeze casting; A comparative study. Ceramics International, 48(1), 179–189. https://doi.org/10.1016/j.ceramint.2021.09.093 [CrossRef] [Google Scholar]
  9. Hariprasad, T., Varatharajan, K., & Ravi, S. (2014). Wear characteristics of B4C and Al2O3 reinforced with Al 5456metal matrix based hybrid composite. Procedia Engineering, 97, 925–929. https://doi.org/10.1016/j.proeng.2014.12.368 [CrossRef] [Google Scholar]
  10. Anusha, P., Sri, M. N. S., Vijayakumar, S., Rao, T. V. J., Paramasivam, P., Jeyakrishnan, S., & Saxena, K. K. (2023). Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA central hybrid composite. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023–01341–5 [Google Scholar]
  11. Gugulothu, B., Bharadwaja, K., Vijayakumar, S., Rao, T. V. J., Sri, M. N. S., Anusha, P., & Agrawal, M. K. (2023). Modeling and parametric optimization of electrical discharge machining on casted composite using central composite design. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023–01323–7 [Google Scholar]
  12. Vijayakumar, S., Satheesh Kumar, P. S., Sampath kumar, P., Manickam, S., Ramaiah, G. B., & Pydi, H. P. (2022). The Effect of Stir-Squeeze Casting Process Parameters on Mechanical Property and Density of Aluminum Matrix Composite. In M. A. Khan (Ed.), Advances in Materials Science and Engineering (Vol. 2022, pp. 1–10). Hindawi Limited. https://doi.org/10.1155/2022/3741718 [Google Scholar]
  13. Vijayakumar, S., Manickam, S., Seetharaman, S., Rao, T. V. J., Pounraj, D., & Pydi, H. P. (2022). Examination of friction stir-welded AA 6262/5456 joints through the optimization technique. Advances in Materials Science and Engineering, 2022, 1–11. https://doi.org/10.1155/2022/4527595 [Google Scholar]
  14. Vijayakumar, S., Anitha, S., Arivazhagan, R., Hailu, A. D., Rao, T. V. J., & Pydi, H. P. (2022). Wear investigation of aluminum alloy surface layers fabricated through friction stir welding method. Advances in Materials Science and Engineering, 2022, 1–8. https://doi.org/10.1155/2022/4120145 [Google Scholar]
  15. Hu, X., Prasanta, S., Nirmal, U., Lu, J., & Arunmungam, S. (2017). Progress in Green Tribology: Green and Conventional Techniques (X. Hu, Ed.; 1st ed.). De Gruyter. https://doi.org/10.1515/9783110367058 [Google Scholar]
  16. Vijayakumar, S., Dhasarathan, N., Devabalan, P., & Jehan, C. (2019). “Advancement and design of robotic manipulator control structures on cyber physical production system”,Journal of Computational and Theoretical Nanoscience, 16(2), 659–663. https://doi.org/10.1166/jctn.2019.7786 [CrossRef] [Google Scholar]
  17. Sahoo, P., & Das, S. K. (2022). Tribology—A tool for mechanical and industrial engineering. In Materials Forming, Machining and Tribology (pp. 1–37). Springer International Publishing. [Google Scholar]
  18. Davim, J. P. (Ed.). (2014). Metal matrix composites: Materials, manufacturing and engineering. De Gruyter. [Google Scholar]
  19. Vijayakumar, S., Satheesh Kumar, P. S., Sampath kumar, P., Manickam, S., Ramaiah, G. B., & Pydi, H. P. (2022). The Effect of Stir-Squeeze Casting Process Parameters on Mechanical Property and Density of Aluminum Matrix Composite. In M. A. Khan (Ed.), Advances in Materials Science and Engineering (Vol. 2022, pp. 1–10). Hindawi Limited. https://doi.org/10.1155/2022/3741718 [Google Scholar]
  20. Palanivel, R., Dinaharan, I., Laubscher, R. F., & Davim, J. P. (2016). Influence of boron nitride nanoparticles on microstructure and wear behavior of AA6082/TiB 2 hybrid aluminum composites synthesized by friction stir processing. Materials & Design, 106, 195–204. https://doi.org/10.1016/j.matdes.2016.05.127 [CrossRef] [Google Scholar]
  21. Basavarajappa, S., Chandramohan, G., & Paulo Davim, J. (2007). Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites. Materials in Engineering, 28(4), 1393–1398. https://doi.org/10.1016/j.matdes.2006.01.006 [Google Scholar]
  22. Gugulothu, B., Anusha, P., Swapna Sri, M. N., Vijayakumar, S., Periyasamy, R., & Seetharaman, S. (2022). Optimization of stir-squeeze casting parameters to analyze the mechanical properties of Al7475/B4C/Al2O3/TiB2 hybrid composites by the Taguchi method. Advances in Materials Science and Engineering, 2022, 1–9. https://doi.org/10.1155/2022/3180442 [Google Scholar]
  23. Boopathy, G., Vanitha, V., Karthiga, K., Gugulothu, B., Pradeep, A., Pydi, H. P., & Vijayakumar, S. (2022). Optimization of tensile and impact strength for injection moulded nylon 66/SiC/B4c composites. Journal of Nanomaterials, 2022, 1–9. https://doi.org/10.1155/2022/4920774 [Google Scholar]
  24. Paramasivam, P., & Vijayakumar, S. (2021). “Mechanical characterization of aluminium alloy 6063 using destructive and non-destructive testing”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.04.312 [Google Scholar]
  25. Vijayakumar, S., Manickam, S., Seetharaman, S., Rao, T. V. J., Pounraj, D., & Pydi, H. P. (2022). Examination of friction stir-welded AA 6262/5456 joints through the optimization technique. Advances in Materials Science and Engineering, 2022, 1–11. https://doi.org/10.1155/2022/4527595 [Google Scholar]
  26. Davim, J. P. (Ed.). (2012). Tribology for Engineers: A Practical Guide. (2011). Wood head Publishing. [Google Scholar]
  27. Davim, J. P. (Ed.). (2017). Progress in Green Tribology: Green and Conventional Techniques. De Gruyter. [Google Scholar]
  28. Davim, J. P. (Ed.). (2021). Mechanical and industrial engineering: Historical aspects and future directions (1st ed.). Springer Nature. [Google Scholar]
  29. Davim, J. P. (2012). Materials and surface engineering: Research and development .Woodhead Publishing. [Google Scholar]
  30. Ashok V., Geetha N.B., Rajkumar S., Pauline T., (2022),”Experimental Investigations for Thermal Energy Management by Encapsulation of Nano -Enhanced Bio Phase Change Material in buildings”,Energy Sources, Part A: Recovery, Utilization and Environmental Effects,Vol.44,no.2,pp.4183 [Google Scholar]
  31. Sunder Selwyn T., Hemalatha S., (2020),”Experimental analysis of mechanical vibration in 225kW wind turbine gear box”,Materials Today: Proceedings,Vol.46,pp.3296. doi:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85112702490 [Google Scholar]
  32. Mr. Nikhil Surkar, Ms. Shriya Timande. (2012). Analysis of Analog to Digital Converter for Biomedical Applications. International Journal of New Practices in Management and Engineering, 1(03), 01 –07. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/6 [CrossRef] [Google Scholar]
  33. Mr. Dharmesh Dhabliya, Mr. Rahul Sharma. (2012). Efficient Cluster Formation Protocol in WSN. International Journal of New Practices in Management and Engineering, 1(03), 08 –17. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/7 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.