EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 491 (2024) E3S Web Conf., 491 (2024) 04019 References
Open Access
Issue
E3S Web Conf.
Volume 491, 2024
International Conference on Environmental Development Using Computer Science (ICECS’24)
Article Number 04019
Number of page(s) 9
Section Engineering for Environment Development Applications
DOI https://doi.org/10.1051/e3sconf/202449104019
Published online 21 February 2024
  1. Chithirai Pon Selvan M, Sampath S S, Sawan Shetty, Shivamurthy B, “Investigation of Abrasive Water jet Cutting Surfaces of Alumina Ceramics”, International Journal of Emerging Technology and Advanced Engineering, Volume 5, Issue 1, pp.402-407, 2015.Er.. [Google Scholar]
  2. Guru Sewak Kesharwani, “Controlled Depth Milling of Ti-6Al-4V Alloy using Non-spherical (Triangular & Trapezoidal) Sharp edge shape ceramics abrasive particle in Abrasive Water Jet Machining”, International Journal of Scientific & Engineering Research, Volume 6, Issue 5, pp. 183-188, 2015 [Google Scholar]
  3. Vishal Gupta, P.M. Pandey, Mohinder Pal Garg, Rajesh Khanna, N.K.Batra, "Minimization of kerf taper angle and kerf width using Taguchi’s method in abrasive water jet machining of marble”, In Proceedings of the Third International Conference on Materials Processing and Characterization (ICMPC 2014), Procedia Materials Science 6, pp. 140 – 149, 2014. [Google Scholar]
  4. Ramprasad, Gaurav Upadhyay,Kamal Hassan, “Optimization MRR Of Stainless Steel 403 In Abrasive Water Jet Machining Using Anova And Taguchi Method”, International Journal of Engineering Research and Applications, Volume 5, Issue 5, pp. 8691, 2015. [Google Scholar]
  5. P. Shanmughasundaram, “Influence of Abrasive Water jet machining parameters on surface roughness of Eutectic Al-Si Alloy-Graphite Composites”, Journal of Materials Physics and Mechanics 19, pp. 1-8, 2014. [Google Scholar]
  6. M. Sreenivasa Rao, S.Ravinder and A. Seshu Kumar, “Parametric Optimization of Abrasive Water jet Machining for Mild Steel: Taguchi Approach”, International Journal of Current Engineering and Technology, Special Issue-2, pp. 28-30, 2014. [Google Scholar]
  7. Vijayakumar, S., Arunkumar, A., Pradeep, A., Satishkumar, P., Singh, B., Rama Raju, K. S., & Sharma, V. K. (2023). Optimization of process variables for shielded metal arc welding dissimilar mild steel and medium carbon steel joints. Journal of Adhesion Science and Technology, 1–18. https://doi.org/10.1080/01694243.2023.2227461 [Google Scholar]
  8. Sharma, P., Paramasivam, P., Bora, B. J., & Sivasundar, V. (2023). Application of nanomaterials for emission reduction from diesel engines powered with waste cooking oil biodiesel. International Journal of Low-Carbon Technologies, 18, 795–801. https://doi.org/10.1093/ijlct/ctad060 [CrossRef] [Google Scholar]
  9. Paramasivam, P., & Vijayakumar, S. (2021). “Mechanical characterization of aluminium alloy 6063 using destructive and non-destructive testing”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.04.312 [Google Scholar]
  10. Vijayakumar, S., Dhasarathan, N., Devabalan, P., & Jehan, C. (2019). “Advancement and design of robotic manipulator control structures on cyber physical production system”,Journal of Computational and Theoretical Nanoscience, 16(2), 659–663. https://doi.org/10.1166/jctn.2019.7786 [CrossRef] [Google Scholar]
  11. D. Sidda Reddy, A. Seshu Kumar, M.Sreenivasa Rao, “Parametric Optimization of Abrasive Water Jet Machining of Inconel 800H UsingTaguchi Methodology”, Universal Journal of Mechanical Engineering 2(5), pp. 158-162, 2014. [CrossRef] [Google Scholar]
  12. Pydi, H. P., Pradeep, A., Vijayakumar, S., & Srinivasan, R. (2022). Examination of various weld process parameters in MIG welding of carbon steel on weld quality using radiography & magnetic particle testing. Materials Today: Proceedings, 62, 1909–1912. https://doi.org/10.1016/j.matpr.2022.01.160 [CrossRef] [Google Scholar]
  13. Manickam, S., Pradeep, A., S.Vijayakumar, & Mosisa, E. (2022). Optimization of arc welding process parameters for joining dissimilar metals. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.06.548 [Google Scholar]
  14. Boopathy, G., Vanitha, V., Karthiga, K., Gugulothu, B., Pradeep, A., Pydi, H. P., & Vijayakumar, S. (2022). Optimization of tensile and impact strength for injection moulded nylon 66/SiC/B4c composites. Journal of Nanomaterials, 2022, 1–9. https://doi.org/10.1155/2022/4920774 [CrossRef] [Google Scholar]
  15. Gugulothu, B., Anusha, P., Swapna Sri, M. N., Vijayakumar, S., Periyasamy, R., & Seetharaman, S. (2022). Optimization of stir-squeeze casting parameters to analyze the mechanical properties of Al7475/B4C/Al2O3/TiB2 hybrid composites by the Taguchi method. Advances in Materials Science and Engineering, 2022, 1–9. https://doi.org/10.1155/2022/3180442 [Google Scholar]
  16. Vijayakumar, S., Manickam, S., Seetharaman, S., Rao, T. V. J., Pounraj, D., & Pydi, H. P. (2022). Examination of friction stir-welded AA 6262/5456 joints through the optimization technique. Advances in Materials Science and Engineering, 2022, 1–11. https://doi.org/10.1155/2022/4527595 [Google Scholar]
  17. Vijayakumar, S., Satheesh Kumar, P. S., Sampath kumar, P., Manickam, S., Ramaiah, G. B., & Pydi, H. P. (2022). The Effect of Stir-Squeeze Casting Process Parameters on Mechanical Property and Density of Aluminum Matrix Composite. In M. A. Khan (Ed.), Advances in Materials Science and Engineering (Vol. 2022, pp. 1–10). Hindawi Limited. https://doi.org/10.1155/2022/3741718 [CrossRef] [Google Scholar]
  18. Anusha, P., Sri, M. N. S., Vijayakumar, S., Rao, T. V. J., Paramasivam, P., Jeyakrishnan, S., & Saxena, K. K. (2023). Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA central hybrid composite. International Journal on Interactive Design and Manufacturing (IJIDeM). [Google Scholar]
  19. K.S. Jai Aultrin, M. Dev Anand, “Optimization of Machining Parameters in AWJM Process for an Copper Iron Alloy Using RSM and Regression Analysis”, International Journal of Emerging Engineering Research and Technology, Volume 2, Issue 5, pp. 1934, 2014. [Google Scholar]
  20. Gugulothu, B., Satheesh Kumar, P. S., Srinivas, B., Ramakrishna, A., & Vijayakumar, S. (2021). “Investigating the material removal rate parameters in ECM for Al 5086 alloy-reinforced silicon carbide/flyash hybrid composites by using Minitab-18”, Advances in Materials Science and Engineering, 2021, 1–6. https://doi.org/10.1155/2021/2079811 [CrossRef] [Google Scholar]
  21. Shanmugaraj M., Vishal J., Rahul G.,(2014), "Analysis of oxygen enriched combustion technology in a single cylinder DI diesel engine", Applied Mechanics and Materials, Vol.592-594, pp.1437. [Google Scholar]
  22. Joy Kiruba P., Ahila R., Biruntha M., Kalpana R.,(2023), "A Smart Energy Management System for Residential Buildings Using IoT and Machine Learning",E3S Web of Conferences,Vol.387. [Google Scholar]
  23. Mr Kunal Verma, Mr Dharmesh Dhabliya. (2015). Design of Hand Motion Assist Robot for Rehabilitation Physiotherapy. International Journal of New Practices in Management and Engineering, 4(04), 07 - 11. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/40 [Google Scholar]
  24. Kartika S. (2016). Analysis of “SystemC” design flow for FPGA implementation. International Journal of New Practices in Management and Engineering, 5(01), 01 - 07. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/41 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.