EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 491 (2024) E3S Web Conf., 491 (2024) 04020 References
Open Access
Issue
E3S Web Conf.
Volume 491, 2024
International Conference on Environmental Development Using Computer Science (ICECS’24)
Article Number 04020
Number of page(s) 9
Section Engineering for Environment Development Applications
DOI https://doi.org/10.1051/e3sconf/202449104020
Published online 21 February 2024
  1. J. Lee, et al., Microstructures and thermal properties of A356/SiCp composites fabricated by liquid pressing method, Mater. Des. 37 (2012) 313e316. [Google Scholar]
  2. Zhao, G., Yuan, Y., Zhang, P., Zhou, T., & Zhou, H. (2020). Influence of orientations biomimeSiC units processed by laser on wear resistance of 7475 aluminium alloy. OpSiCs and Laser Technology, 127(106196), 106196. https://doi.org/10.1016/j.optlastec.2020.106196 [CrossRef] [Google Scholar]
  3. Sekar, K., Jayachandra, G., & Aravindan, S. (2018). Mechanical and welding properties of A7475-SiC-ZrO2 hybrid composite fabricated by stir and squeeze casting. Materials Today: Proceedings, 5(9), 20268–20277. https://doi.org/10.1016/j.matpr.2018.06.398 [CrossRef] [Google Scholar]
  4. Park, B. G., A. G. Crosky, and A. K. Hellier. 2008. “Fracture Toughness of Microsphere Al2O3-Al ParSiCulate Metal Matrix Composites.” Composites Part B: Engineering 39 (7–8): 1270–1279. doi:10.1016/j.compositesb.2008.01.005. [CrossRef] [Google Scholar]
  5. Prabu, S. Balasivanandha, L. Karunamoorthy, S. Kathiresan, and B.Mohan. 2006. “Influence of Stirring Speed and Stirring Time on Distribution of ParSiCles in Cast Metal Matrix Composite.” Journal of Materials Processing Technology 171 (2): 268–273. doi:10.1016/j.jmatprotec.2005.06.071. [CrossRef] [Google Scholar]
  6. K. Umanath, K. Palanikumar, V. Sankaradass, and K. Uma, “Optimizations of friction stir welding process parameters of AA6063 Aluminium alloy by Taguchi technique,” Mater. Today Proc., vol. 46, no. xxxx, pp. 4008–4013, 2020, doi: 10.1016/j.matpr.2021.02.539. [CrossRef] [Google Scholar]
  7. Shorowordi, K. M., T. Laoui, A. S. M. A. Haseeb, J. P. Celis, and L. Froyen. 2003. “Microstructure and Interface CharacterisSiCs of B4C, SiC and Al2O3 Reinforced Al Matrix Composites: A Comparative Study.” Journal of Materials Processing Technology 142 (3): 738–743. doi:10.1016/S0924-0136(03)00815-X. [CrossRef] [Google Scholar]
  8. Dao, V., Zhao, S., Lin, W., Zhang, C., 2012. Effect of process parameters on microstructure and mechanical properties in AlSi9Mg connecting-rod fabricated by semi-solid squeeze casting. Mater. Sci. Eng. A 558, 95–102 [CrossRef] [Google Scholar]
  9. Vijayakumar, S., Arunkumar, A., Pradeep, A., Satishkumar, P., Singh, B., Rama Raju, K. S., & Sharma, V. K. (2023). Optimization of process variables for shielded metal arc welding dissimilar mild steel and medium carbon steel joints. Journal of Adhesion Science and Technology, 1–18. https://doi.org/10.1080/01694243.2023.2227461 [Google Scholar]
  10. Sharma, P., Paramasivam, P., Bora, B. J., & Sivasundar, V. (2023). Application of nanomaterials for emission reduction from diesel engines powered with waste cooking oil biodiesel. International Journal of Low-Carbon Technologies, 18, 795–801. https://doi.org/10.1093/ijlct/ctad060 [CrossRef] [Google Scholar]
  11. Gugulothu, B., Seetharaman, S., Vijayakumar, S., & Jenila Rani, D. (2022). “Process parameter optimization for tensile strength and Hardness of Al-MMC using RSM technique”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.043 [Google Scholar]
  12. Pal, D., Vijayakumar, S., Rao, T. V. J., & Babu, R. S. R. (2022). “An examination of the tensile strength, hardness and SEM analysis of Al 5456 alloy by addition of different percentage of SiC/flyash”,Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.02.288 [Google Scholar]
  13. Paramasivam, P., & Vijayakumar, S. (2021). “Mechanical characterization of aluminium alloy 6063 using destructive and non-destructive testing”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.04.312 [Google Scholar]
  14. Manickam, S., Pradeep, A., S.Vijayakumar, & Mosisa, E. (2022). Optimization of arc welding process parameters for joining dissimilar metals. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.06.548 [Google Scholar]
  15. Pradeep, A., Kavitha, N., Janardhana Rao, T. V., & Vijayakumar, S. (2022). Influence of nano alumina/vegetable oil based cutting fluid on MQL turning of stainless steel 304. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.06.547 [Google Scholar]
  16. Vijayakumar, S., Anitha, S., Arivazhagan, R., Hailu, A. D., Rao, T. V. J., & Pydi, H. P. (2022). Wear investigation of aluminum alloy surface layers fabricated through friction stir welding method. Advances in Materials Science and Engineering, 2022, 1–8. https://doi.org/10.1155/2022/4120145 [Google Scholar]
  17. Vijayakumar, S., Manickam, S., Seetharaman, S., Rao, T. V. J., Pounraj, D., & Pydi, H. P. (2022). Examination of friction stir-welded AA 6262/5456 joints through the optimization technique. Advances in Materials Science and Engineering, 2022, 1–11. https://doi.org/10.1155/2022/4527595 [Google Scholar]
  18. Vijayakumar, S., Satheesh Kumar, P. S., Sampath kumar, P., Manickam, S., Ramaiah, G. B., & Pydi, H. P. (2022). The Effect of Stir-Squeeze Casting Process Parameters on Mechanical Property and Density of Aluminum Matrix Composite. In M. A. Khan (Ed.), Advances in Materials Science and Engineering (Vol. 2022, pp. 1–10). Hindawi Limited. https://doi.org/10.1155/2022/3741718 [Google Scholar]
  19. Gugulothu, B., Bharadwaja, K., Vijayakumar, S., Rao, T. V. J., Sri, M. N. S., Anusha, P., & Agrawal, M. K. (2023). Modeling and parametric optimization of electrical discharge machining on casted composite using central composite design. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023-01323-7 [Google Scholar]
  20. Anusha, P., Sri, M. N. S., Vijayakumar, S., Rao, T. V. J., Paramasivam, P., Jeyakrishnan, S., & Saxena, K. K. (2023). Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA central hybrid composite. International Journal on Interactive Design and Manufacturing (IJIDeM). [Google Scholar]
  21. Karthikeyan S., Mohan B., Kathiresan S.,(2021),"Influence of Rotational Magnetorheological Abrasive Flow Finishing Process on Biocompatibility of Stainless Steel 316L",Journal of Materials Engineering and Performance,Vol.30,no.2,pp.1553. [Google Scholar]
  22. Udendhran R., Sasikala R., Nishanthi R., Vasanthi J.,(2023), "Smart Energy Consumption Control in Commercial Buildings Using Machine Learning and IOT", E3S Web of Conferences, Vol.387. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85160560463 [Google Scholar]
  23. Madhuri Zambre. (2016). Analysis and Modeling of Physical Stratum for Power Line Communication. International Journal of New Practices in Management and Engineering, 5(01), 08-13. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/42 [CrossRef] [Google Scholar]
  24. Prachiti Deshpande. (2016). Performance Analysis of RPL Routing Protocol for WBANs. International Journal of New Practices in Management and Engineering, 5(01), 14-21. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/43 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.