Open Access
Issue |
E3S Web Conf.
Volume 499, 2024
The 1st Trunojoyo Madura International Conference (1st TMIC 2023)
|
|
---|---|---|
Article Number | 01009 | |
Number of page(s) | 6 | |
Section | Dense Matter | |
DOI | https://doi.org/10.1051/e3sconf/202449901009 | |
Published online | 06 March 2024 |
- J. Wu et al., “Full biomass-derived multifunctional aerogel for solar-driven interfacial evaporation,” Chemical Engineering Journal, vol. 471, p. 144684, 2023. [CrossRef] [Google Scholar]
- A. Molino, S. Chianese, and D. Musmarra, “Biomass gasification technology: The state of the art overview,” Journal of Energy Chemistry, vol. 25, no. 1, pp. 10–25, 2016, doi: https://doi.org/10.1016/j.jechem.2015.11.005. [CrossRef] [Google Scholar]
- Q. Xu et al., “Unlocking the potential of Dongting Lake-grown Miscanthus lutarioriparius biomass: A comprehensive quality analysis and bioproduct application study,” Science of The Total Environment, vol. 896, p. 165276, 2023. [CrossRef] [Google Scholar]
- A. Sertolli, Z. Gabnai, P. Lengyel, and A. Bai, “Biomass Potential and Utilization in Worldwide Research Trends—A Bibliometric Analysis,” Sustainability (Switzerland), vol. 14, no. 9, 2022. [Google Scholar]
- M. Yan, N. Afxentiou, and P. A. Fokaides, “The State of the Art Overview of the Biomass Gasification Technology,” Current Sustainable/Renewable Energy Reports, vol. 8, no. 4, pp. 282–295, 2021. [CrossRef] [Google Scholar]
- S. Kim, D. Kim, B.-G. Ryu, and Y. K. Chang, “Design optimization of large-scale attached cultivation of Ettlia sp. to maximize biomass production based on simulation of solar irradiation,” Appl Energy, vol. 279, p. 115802, 2020. [Google Scholar]
- A. Karimah et al., “Extraction of lignin from sugarcane trash and its potency as biosurfactant,” Bioresour Technol Rep, vol. 24, p. 101630, 2023. [CrossRef] [Google Scholar]
- X. Lu, T. Han, J. Jiang, K. Sun, Y. Sun, and W. Yang, “Comprehensive insights into the influences of acid-base properties of chemical pretreatment reagents on biomass pyrolysis behavior and wood vinegar properties,” J Anal Appl Pyrolysis, vol. 151, p. 104907, 2020. [CrossRef] [Google Scholar]
- M. A. Waheed, O. A. Akogun, and C. C. Enweremadu, “Dataset on the performance characteristics of briquettes from selected agricultural wastes using a piston-type briquetting machine,” Data Brief, vol. 50, p. 109476, 2023. [Google Scholar]
- J. Schobing et al., “Inventory of the French densified log market: Characterization and emission factors measurement of twenty commercial briquettes,” Fuel, vol. 335, p. 127060, 2023. [CrossRef] [Google Scholar]
- G. Chinga-Carrasco, “Novel Biocomposite Engineering and Bio-Applications,” Bioengineering, vol. 5, no. 4, 2018. [Google Scholar]
- T. Zhou, W. Zhang, Y. Shen, S. Luo, and D. Ren, “Progress in the change of ash melting behavior and slagging characteristics of co-gasification of biomass and coal: A review,” Journal of the Energy Institute, p. 101414, 2023. [CrossRef] [Google Scholar]
- M. T. Muzakir, M. Nizar, and C. S. Yulianti, “Pemanfaatan kulit buah kakao menjadi briket arang menggunakan kanji sebagai perekat,” Jurnal Serambi Engineering, vol. 2, no. 3, pp. 124–129, 2017. [Google Scholar]
- P. K. Gandam et al., “Corncob-based biorefinery: A comprehensive review of pretreatment methodologies, and biorefinery platforms,” Journal of the Energy Institute, vol. 101, pp. 290–308, 2022. [CrossRef] [Google Scholar]
- A. Fatima et al., “Feasibility of manufacturing sustainable bio-composites from agricultural waste,” Mater Today Proc, 2021. [Google Scholar]
- M. Ishaq and H. Ishaq, “Performance assessment of biogas-fed solid oxide fuel cell system for municipal solid waste treatment,” J Clean Prod, vol. 354, p. 131702, 2022. [CrossRef] [Google Scholar]
- M. Rajendran and C. kavitha Nagarajan, “Experimental Investigation on bio-Composite Using Jute and Banana Fiber as a Potential Substitute of Solid Wood Based Materials,” Journal of Natural Fibers, pp. 1–10, Jan. 2021. [Google Scholar]
- W. A. Rizal et al., “Chemical composition of liquid smoke from coconut shell waste produced by SME in Rongkop Gunungkidul,” in IOP Conference Series: Earth and Environmental Science, Institute of Physics Publishing, Apr. 2020.. [Google Scholar]
- S.-C. Sun, S.-F. Sun, Y. Xu, J.-L. Wen, and T.-Q. Yuan, “Green and sustainable production of high- purity lignin microparticles with well-preserved substructure and enhanced anti-UV/oxidant activity using peroxide-promoted alkaline deep eutectic solvent,” Int J Biol Macromol, p. 127057, 2023. [CrossRef] [PubMed] [Google Scholar]
- D. A. Pramasari et al., “The use of hemicellulose acid hydrolysate for hydrolysis of sugarcane trash and its fermentation for producing xylitol,” Ind Crops Prod, vol. 193, p. 116163, 2023. [CrossRef] [Google Scholar]
- C. D. Liyanage and M. Pieris, “A Physico- Chemical Analysis of Coconut Shell Powder,” Procedia Chem, vol. 16, pp. 222–228, 2015. [CrossRef] [Google Scholar]
- M. Szymańska-Chargot et al., “A study of the properties of hemicelluloses adsorbed onto microfibrillar cellulose isolated from apple parenchyma,” Food Chem, vol. 430, p. 137116, 2024. [CrossRef] [PubMed] [Google Scholar]
- Y. Gao, Y. Guo, Y. Guan, and H. Ma, “New insights into the carbon chain structure of alcohol on the combustion of diesel surrogates using ReaxFF molecular dynamics simulations,” Chem Phys, vol. 574, p. 112035, 2023. [CrossRef] [Google Scholar]
- S. Mohd-Asharuddin, N. Othman, N. Shaylinda, M. Zin, and H. A. Tajarudin, “A Chemical and Morphological Study of Cassava Peel: A Potential Waste as Coagulant Aid.” [Google Scholar]
- S. Balaji, C. Sivakandhan, P. Maniarasan, D. Deepak, K. Senthamarai, and S. V Alagarsamy, “Effect of process parameters on machining behaviour using S/N ratio and ANOVA analysis,” Mater Today Proc, vol. 74, pp. 97–104, 2023. [CrossRef] [Google Scholar]
- B. Yang et al., “Effects of simultaneous denitrification and desulfurization and changes of microbial community structure with corncob solid slow-release carbon source under different S/N ratios,” Journal of Water Process Engineering, vol. 47, p. 102737, 2022. [CrossRef] [Google Scholar]
- H. Saptoadi and M. Arif Wibisono, “Modelling and Optimization of the Best Parameters of Rice Husk Drying and Carbonization by Using Taguchi Method with Multi Response Signal to Noise Procedure,” 2017. [Google Scholar]
- M. K. Dutta and R. K. Sarkar, “Application of Retinex and histogram equalisation techniques for the restoration of faded and distorted artworks: A comparative analysis,” Optik (Stuttg), vol. 272, p. 170201, 2023. [CrossRef] [Google Scholar]
- M. Sarkar and A. Mandal, “SLAAHE: Selective Apex Adaptive Histogram Equalization,” Franklin Open, vol. 3, p. 100023, 2023. [CrossRef] [Google Scholar]
- M. Jeanne Rampe, B. Setiaji, and W. Trisunaryanti, “24 Fabrication And Characterization Of Carbon Composite From Coconut Shell Carbon,” 2011. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.