Open Access
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 01002
Number of page(s) 27
Section Materials Science
Published online 25 March 2024
  1. Alateyah, A.I., et al. “Effect of ECAP die angle on the strain homogeneity, microstructural evolution, crystallographic texture and mechanical properties of pure magnesium: numerical simulation and experimental approach.” Journal of Materials Research and technology 17 (2022): 1491–1511. [Google Scholar]
  2. Liu, Huafeng, et al. “Effects of La Addition on the Microstructure, thermal Conductivity and Mechanical Properties of Mg-3Al-0.3 Mn Alloys.” Materials 15.3 (2022): 1078. [CrossRef] [PubMed] [Google Scholar]
  3. Rashidi, Ali Mohammad, and M. Etemadi. “Analytical modeling of the stretching in the bimetallic materials produced by equal channel angular pressing.” AUt Journal of Mechanical Engineering 6.1 (2022): 1–1. DOI: 10.22060/AJME.2021.19625.5957. [Google Scholar]
  4. Suo, Tao, et al. “The simulation of deformation distribution during ECAP using 3D finite element method.” Materials Science and Engineering: A 432.1-2 (2006): 269–274. [CrossRef] [Google Scholar]
  5. Chen, Jianqing, et al. “Enhancement of strength-ductility synergy in ultrafine-grained Cu-Zn alloy prepared by ECAP and subsequent annealing.” Journal of Materials Research and technology 17 (2022): 433–440. [Google Scholar]
  6. Syarif, Junaidi, Amro Altoyuri, and Intan Fadhlina Mohamed. “Equal channel angular pressing of single crystal aluminum: a molecular dynamics simulation.” Journal of Materials Research and technology 17 (2022): 888–897. [Google Scholar]
  7. Rifai, Muhammad, and Hiroyuki Miyamoto Mujamilah. “Hardness and Microstructure Homogeneity of Pure Copper and Iron-Chromium Alloy Processed by Severe Plastic Deformation.” International Journal 10.1 (2022). [Google Scholar]
  8. Bazaz, B., A. Zarei-Hanzaki, and S.M. Fatemi-Varzaneh. “Hardness and microstructure homogeneity of pure copper processed by accumulative back extrusion.” Materials Science and Engineering: A 559 (2013): 595–600. [CrossRef] [Google Scholar]
  9. Palanivel, Ramaswamy, et al. “Effect of Machining Process Parameters and Number of Pass on Compaction Behaviour of Commercially Pure Aluminium Chips Consolidated by Equal Channel Angular Pressing (ECAP) Using Response Surface Methodology.” Archives of Metallurgy and Materials 67 (2022). [Google Scholar]
  10. Murashkin, M. Yu, et al. “Strength, thermal resistance and electrical conductivity of aluminum-based composite wire.” Journal of Physics: Conference Series. Vol. 2231. No. 1. IOP Publishing, 2022. DOI: 10.1088/1742-6596/2231/1/012005. [Google Scholar]
  11. Heydarinia, Ali, et al. “Free volume formation and the high strength of pure Mg after room temperature core-sheath ECAP passes.” Journal of Materials Research and technology 18 (2022): 147–158. [Google Scholar]
  12. Dai, Yuxin, Liangming Yan, and Jianpeng Hao. “Review on Micro-Alloying and Preparation Method of 7xxx Series Aluminum Alloys: Progresses and Prospects.” Materials 15.3 (2022): 1216. [Google Scholar]
  13. Abd El Aal, Mohamed Ibrahim, and Elshafey Ahmed Gadallah. “Parallel tubular Channel Angular Pressing (PtCAP) Processing of the Cu-20.7 Zn-2Al tube.” Materials 15.4 (2022): 1469. [CrossRef] [PubMed] [Google Scholar]
  14. Carazo, Fernando D., et al. “Analysis of Strain Inhomogeneity in Extruded Al 6061-t6 Processed by ECAE.” Metals 12.2 (2022): 299. [Google Scholar]
  15. Silva, W.B., et al. “Magnesium Alloys for Hydrogen Storage Processed by ECAP Followed by Low temperature Rolling.” Materials Research 25 (2022). [Google Scholar]
  16. Edalati, Kaveh, et al. “Nanomaterials by severe plastic deformation: review of historical developments and recent advances.” Materials Research Letters 10.4 (2022): 163–256. [CrossRef] [Google Scholar]
  17. Tong, S.H.E.N., et al. “Effect of strain rate on microstructure and mechanical properties of spray-formed Al-Cu-Mg alloy.” Transactions of Nonferrous Metals Society of China 32.4 (2022): 1096–1104. [Google Scholar]
  18. Tong, S.H.E.N., et al. “Effect of strain rate on microstructure and mechanical properties of spray-formed Al-Cu-Mg alloy.” Transactions of Nonferrous Metals Society of China 32.4 (2022): 1096–1104. [Google Scholar]
  19. Namur, Ricardo Sanson, et al. “Cryogenic and Room temperature ECAP Consolidation of Blended Elemental Powders of Aluminum and Copper.” Materials Research 25 (2022). [CrossRef] [Google Scholar]
  20. Li, Zhuoliang, et al. “An evaluation of the mechanical properties, microstructures and strengthening mechanisms of pure Mg processed by high‐pressure torsion at different temperatures.” Advanced Engineering Materials (2022). [Google Scholar]
  21. Lei, T.A.N.G., et al. “Strong and ductile Al-Zn-Mg-Zr alloy obtained by equal angular pressing and subsequent aging.” Transactions of Nonferrous Metals Society of China 32.5 (2022): 1428–1441. [Google Scholar]
  22. Skiba, Jacek, et al. “The impact of severe plastic deformations obtained by hydrostatic extrusion on the machinability of ultrafine-grained ti grade 2 intended for fasteners.” (2022). [Google Scholar]
  23. Snopiński, Przemysław, et al. “Evolution of Microstructure, texture and Corrosion Properties of Additively Manufactured AlSi10Mg Alloy Subjected to Equal Channel Angular Pressing (ECAP).” Symmetry 14.4 (2022): 674. [Google Scholar]
  24. Harničárová, Marta, et al. “Structural and Mechanical Changes of AlMgSi0. 5 Alloy during Extrusion by ECAP Method.” Materials 15.6 (2022): 2020. [CrossRef] [PubMed] [Google Scholar]
  25. Wu, Haoran, et al. “Achieving high-strain-rate and low-temperature superplasticity in an ECAP-processed Mg-Y-Er-Zn alloy via Ag addition.” Journal of Magnesium and Alloys (2022). [Google Scholar]
  26. Elsayed, Abdallah, et al. “Observing the Effect of Grain Refinement on Crystal Growth of Al and Mg Alloys during Solidification Using In-Situ Neutron Diffraction.” Metals 12.5 (2022): 793. [Google Scholar]
  27. Romero-Resendiz, L., et al. “Mechanical, stress corrosion cracking and crystallographic study on flat components processed by two combined severe plastic deformation techniques.” Journal of Materials Research and technology 18 (2022): 1281–1294. [Google Scholar]
  28. Abd El Aal, Mohamed Ibrahim, et al. “Influence of Parallel tubular Channel Angular Pressing (PtCAP) Processing on the Microstructure Evolution and Wear Characteristics of Copper and Brass tubes.” Materials 15.9 (2022): 2985. [CrossRef] [PubMed] [Google Scholar]
  29. Sun, X.; Su, Y.; Huang, Y.; Chen, M.; Liu, D. Microstructure Evolution and Properties of -tCP/Mg-Zn-Ca Biocomposite Processed by Hot Extrusion Combined with Multi-Pass ECAP. Metals 2022, 12, 685. [Google Scholar]
  30. Klinge, Lina, et al. “Nanostructured ti-13Nb-13Zr for dental implant applications produced by severe plastic deformation.” Journal of Materials Research (2022): 1–8. DOI: 10.1557/s43578-022-00587-1. [Google Scholar]
  31. Zhou, Wenbin, et al. “An upper bound solution for deformation field analysis in differential velocity sideways extrusion using a unified stream function.” International Journal of Mechanical Sciences 224 (2022): 107323. [Google Scholar]
  32. Ciemiorek, M., et al. “Ductility and formability of ultrafine-grained 5754 aluminium alloy under various strain rates and temperatures.” Materials Science and Engineering: A (2022): 143375. [CrossRef] [Google Scholar]
  33. Shan, Zhaohui, et al. “Microstructural evolution and precipitate behavior of an AZ61 alloy plate processed with ECAP and electropulsing treatmenT.” Journal of Materials Research and technology (2022). [Google Scholar]
  34. Yuan, Yuxuan, et al. “Improving microstructure and corrosion resistance of LPSOcontaining Mg-Y-Zn-Mn alloy through ECAP integrated with prior solution treatmenT.” Journal of Materials Research and technology (2022). [Google Scholar]
  35. Snopiński, P., et al. “Overcoming the strength-ductility trade-off in additively manufactured AlSi10Mg alloy by ECAP processing.” Journal of Alloys and Compounds (2022): 165817. [Google Scholar]
  36. Zahari, Zahiruddeen Salam, Dayangku Noorfazidah A. Wang Shri, and Akiko Yamamoto. “Investigation of mechanical properties and in vitro corrosion of bulk nanostructured metal produced by equal channel angular pressing.” AIP Conference Proceedings. Vol. 2454. No. 1. AIP Publishing LLC, 2022. [Google Scholar]
  37. Y. Wang, M. Chen, F. Zhou, and E. Ma, “High tensile ductility in a nanostructured metal,” Nature, vol. 419, no. 6910, pp. 912–915, OcT. 2002, DOI: 10.1038/nature01133. [Google Scholar]
  38. J.A. del Valle, F. Carreño, and O.A. Ruano, “Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling,” Acta Mater., vol. 54, no. 16, pp. 4247–4259, Sep. 2006, DOI: 10.1016/j.actamaT.2006.05.018. [CrossRef] [Google Scholar]
  39. B. Tolaminejad and K. Dehghani, “Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion,” Mater. Des., vol. 34, pp. 285–292, Feb. 2012, DOI: 10.1016/j.matdes.2011.08.003. [Google Scholar]
  40. Nagendra Singh, Manoj Kumar Agrawal, Kuldeep Kumar Saxena, Sandeep Kumar, Chander Prakash, “Advancement and influence of Designing of ECAP on Deformation and Microstructure Properties of the AA5083 Under thermal Effects.” Int J Interact Des Manuf (2022) Published. [Google Scholar]
  41. W. Cheng, L. Tian, S. Ma, Y. Bai, and H. Wang, “Influence of Equal Channel Angular Pressing Passes on the Microstructures and tensile Properties of Mg- 8Sn-6Zn-2Al Alloy,” Materials, vol. 10, no. 7, ArT. no. 7, Jul. 2017, DOI: 10.3390/ma10070708. [Google Scholar]
  42. G.M. Naik, S. Narendra Nath, and S.S.S. Kumar, “Effect of ECAP Die Angles on Microstructure Mechanical Properties and Corrosion Behavior of AZ80 Mg Alloy,” J. Mater. Eng. Perform. 28, 2019, P. 2610–2619. [Google Scholar]
  43. Nagendra Singh, Manoj Kumar Agrawal Dr., Sanjeev Kumar Verma, and Ashish Kumar Tiwari. “A Review on Effect of Stress and Strain Distribution on the AA5083 With Respect to Different Channel Angle of ECAP.” International Research Journal on Advanced Science Hub 04.03 March (2022): 57–6. [Google Scholar]
  44. M. El-Shenawy, M.M.Z. Ahmed, A. Nassef, M. El-Hadek, B. Alzahrani, Y. Zedan, W.H. El-Garaihy, “Effect of ECAP on the Plastic Strain Homogeneity, Microstructural Evolution, Crystallographic texture and Mechanical Properties of AA2xxx Aluminum Alloy,” Metals, 11(6), 2021, p. 938. [CrossRef] [Google Scholar]
  45. A.V. Nagasekhar, Y. Tick-Hon, S. Li, and H.P. Seow, “Effect of acute tool-angles on equal channel angular extrusion/pressing,” Mater. Sci. Eng. A, vol. 410-411, pp. 269–272, Nov. 2005, DOI: 10.1016/j.msea.2005.08.043. [Google Scholar]
  46. Nagendra Singh; Manoj Kumar Agrawal; Sanjeev Kumar Verma; Ashish Kumar Tiwari. “Study of the effect of ECAPed Method on the Mechanical Properties of AA 5083: An Overview”. International Research Journal on Advanced Science Hub, 4, 06, 2022, 186–191. DOI: 10.47392/irjash.2022.044. [CrossRef] [Google Scholar]
  47. Nagendra Singh, Manoj Kumar Agrawal, Sanjeev Kumar Verma, Ashish Kumar Tiwari “Impact design of die parameters on Severe plastic deformation during Equal channel angular pressing: An overview.” E3S Web of Conferences. Vol. 430. EDP Sciences, 2023. 15th ICMPC, March 2023, GRIEt Hyderabad [Google Scholar]
  48. R.Z. Valiev and T. G. Langdon, “Principles of equal-channel angular pressing as a processing tool for grain refinement,” Prog. Mater. Sci., vol. 51, no. 7, pp. 881–981, Sep. 2006, DOI: 10.1016/j.pmatsci.2006.02.003. [Google Scholar]
  49. 3D FEM simulation of Al-Zn-Mg-Cu alloy during multi-pass ECAP with varying processing routes,” Mater. today Commun., vol. 26, p. 102112, Mar. 2021, DOI: 10.1016/j.mtcomm.2021.102112. [Google Scholar]
  50. Nagendra Singh, Manoj Kumar Agrawal, Sanjeev Kumar Verma, Ashish Kumar Tiwari, A review on impact route process on AA5083 of back pressure through equal channel angular pressing, Materials today: Proceedings, 2023, [Google Scholar]
  51. Fouad, Dina M., et al. “Grain structure evolution and mechanical properties of multichannel spiral twist extruded AA5083.” Metals 11.8 (2021): 1276. [Google Scholar]
  52. Panda, Amlana, et al. “A Comprehensive review on AISI 4340 hardened steel: emphasis on industry implemented machining settings, implications, and statistical analysis.” International Journal of Integrated Engineering 12.8 (2020): 61–82. [Google Scholar]
  53. Kadiyan, Sunil, et al. “Mechanical and microstructural characteristics of AA6082 using thermal equal channel angular pressing for structural applications.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023): 09544089231205778. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.