Open Access
Issue
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 01029
Number of page(s) 11
Section Materials Science
DOI https://doi.org/10.1051/e3sconf/202450501029
Published online 25 March 2024
  1. Kontonasaki E., Kantiranis N., Papadopoulou L., et al. Microstructural characterization and comparative evaluation of physical, mechanical and biological properties of three ceramics for metal-ceramic restorations. Dent Mater. 2008;24:1362–1373. [Google Scholar]
  2. Poul Raj I.L., Valanarasu S., Hariprasad K., et al. Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications. Opt Mater (Amst). 2020;109:110396. [Google Scholar]
  3. Kalpana G., Kumar P. V., Aljawarneh, S., et al. Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning. Comput Electr Eng. 2018;65:178–195. [Google Scholar]
  4. Singh L., Awasthi A.. Role of metal oxidation at high temperature. Adv Mater Process technol. 2020; [Google Scholar]
  5. Atchudan R., Jebakumar Immanuel Edison T.N., Shanmugam, M., et al. Sustainable synthesis of carbon quantum dots from banana peel waste using hydrothermal process for in vivo bioimaging. Phys E Low-dimensional Syst Nanostructures. 2021;126:114417. [Google Scholar]
  6. Qarni M.J., Rosochowski A., Boczkal S.. Influence of incremental ECAP on the microstructure and tensile behaviour of commercial purity titanium. Procedia Eng. Elsevier Ltd; 2017. p. 1481–1486. [Google Scholar]
  7. Kumar P.S.S., Allamraju K.V.. A Review Of Natural Fiber Composites [Jute, Sisal, Kenaf]. Mater today Proc. 2019;18:2556–2562. [Google Scholar]
  8. Habijan, T., Haberland, C., Meier, H., et al. The biocompatibility of dense and porous Nickel-titanium produced by selective laser melting. Mater Sci Eng C. 2013; [Google Scholar]
  9. Awasthi A., Saxena K.K., Arun V.. Sustainable and smart metal forming manufacturing process. Mater today Proc. 2021;44:2069–2079. [Google Scholar]
  10. Chandrappa, V., Basavapoornima, C., Kesavulu, C.R., Babu, A.M., Depuru, S.R., & Jayasankar, C.K. (2022). Spectral studies of Dy3+: zincphosphate glasses for white light source emission applications: a comparative study. Journal of Non-Crystalline Solids, 583, 121466. [Google Scholar]
  11. Hezma, A.M., Elashmawi, I.S., Abdelrazek, E.M., Rajeh, A., & Kamal, M. (2017). Enhancement of the thermal and mechanical properties of polyurethane/polyvinyl chloride blend by loading single walled carbon nanotubes. Progress in Natural Science: Materials International, 27(3), 338–343. [Google Scholar]
  12. Arora, G.S., Gupta, A., & Saxena, K.K. (2024). Evaluation of mechanical, microstructural, tribological characteristics and cytocompatibility in AZ31 hybrid bio-composite reinforced with tiO2-HAp. Results in Surfaces and Interfaces, 14, 100174. [Google Scholar]
  13. Sun W., Xi Z., Zheng H., et al. Synthesis and electrorheological properties of silica-coated MoS2 nanocomposites with hierarchical and core-shell structure. J taiwan Inst Chem Eng. 2021;118:271–283. [Google Scholar]
  14. Jaffery H.A., Sabri M.F.M., Said S.M., et al. Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron. J Alloys Compd. 2019;810:151925. [Google Scholar]
  15. Yadav S., Yamasani P., Kumar S.. Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor. Energy Convers Manag. 2015;99:1–7. [Google Scholar]
  16. Procházka, R., Sláma, P., Dlouhỳ, J., et al. Local mechanical properties and microstructure of EN AW 6082 aluminium alloy processed via ECAP-conform technique. Materials (Basel). 2020; [Google Scholar]
  17. Chaudhary, N., Dikshit, M.K., Kumar, C.L., Sonia, P., Pathak, V.K., Saxena, K.K., … & Salmaan, N.U. (2023). Sustainable mechanical properties evaluation for graphene reinforced Epoxy/Kevlar fiber using MD simulations. Journal of Experimental Nanoscience, 18(1), 2246662. [CrossRef] [Google Scholar]
  18. Singh, R., Gupta, A., Tripathi, O., Srivastava, S., Singh, B., Awasthi, A., … & Saxena, K.K. (2020). Powder bed fusion process in additive manufacturing: An overview. Materials today: Proceedings, 26, 3058–3070. [Google Scholar]
  19. Silva D.C., Rezende M.C., De Medeiros N.. Microstructural characterization and evaluation of the thermomechanical behavior of an Al 7075-t651 alloy deformed by two passes of ECAP. Mater Res. Universidade Federal de Sao Carlos; 2017. p. 662–666. [Google Scholar]
  20. Li, T.T., Zhang, Y., Ling, L., et al. Manufacture and characteristics of HA-Electrodeposited polylactic acid/polyvinyl alcohol biodegradable braided scaffolds. J Mech Behav Biomed Mater. 2020;103. [Google Scholar]
  21. Kodli B.K., Karre R., Saxena K.K., et al. Flow behaviour of tiHy 600 alloy under hot deformation using gleeble 3800. Adv Mater Process technol. 2017; [Google Scholar]
  22. Gupta, T.K., Budarapu, P.R., Chappidi, S.R., et al. Advances in Carbon Based Nanomaterials for Bio-Medical Applications. Curr Med Chem [Internet]. 2019 [cited 2023 Apr 27];26:6851–6877. Available from: https://pubmed.ncbi.nlm.nih.gov/30474523/. [Google Scholar]
  23. Singhal, T.S., Jain, J.K., Kumar, M., Bhojak, V., Saxena, K.K., Buddhi, D., & Prakash, C. (2023). A comprehensive comparative review: welding and additive manufacturing. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–15. [Google Scholar]
  24. Kumar Yadav A., Agrawal M.K., Saxena K.K., et al. Prediction of thermal fields and stresses developed in GtAW dissimilar weldments of AA 5083 and AA 6082. Mater today Proc. 2023; [Google Scholar]
  25. Srinivasan L., Jakka S.J., Sathiya P.. Microstructure and mechanical properties of Gas tungsten arc welded High Strength Low Alloy (15CDV6) steel joints. Mater today Proc. 2017;4:8874–8882. [Google Scholar]
  26. Yue L., Jayapal M., Cheng X., et al. Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Appl Surf Sci. 2020;512:145686. [CrossRef] [Google Scholar]
  27. Damavandi, E., Nourouzi, S., Rabiee, S.M., et al. Effect of ECAP on microstructure and tensile properties of A390 aluminum alloy. Trans Nonferrous Met Soc China (English Ed. 2019;29:931–940. [Google Scholar]
  28. Singh, L., Yahya, M.M., Singh, B., Sehgal, S., Saxena, K.K., & Mohammed, K.A. (2023). Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083. Metal Science and Heat treatment, 1–5. [Google Scholar]
  29. Mantani Y., Takemoto, Y., Hida, M., et al. Phase transformation of α″ martensite structure by aging in ti-8mass%Mo alloy. Mater trans. 2004; [Google Scholar]
  30. Krishnaja, D., Cheepu, M., & Venkateswarlu, D. (2018, March). A review of research progress on dissimilar laser weld-brazing of automotive applications. In IOP Conference Series: Materials Science and Engineering (Vol. 330, p. 012073). IOP Publishing. [Google Scholar]
  31. Zajc N., Obreza A., Bele M., et al. Physical properties and dissolution behaviour of nifedipine/mannitol solid dispersions prepared by hot melt method. Int J Pharm. 2005;291:51–58. [Google Scholar]
  32. Saxena K.K., Kumar K.B., Gupta A.. Effect of processing parameters on equal-channel angular pressing of aluminum alloys: An overview. Mater today Proc. Elsevier Ltd; 2021. p. 5551–5559. [Google Scholar]
  33. Shahali H., Jaggessar A., Yarlagadda PKDV. Recent Advances in Manufacturing and Surface Modification of titanium Orthopaedic Applications. Procedia Eng. 2017. [Google Scholar]
  34. Balguri P.K., Samuel D.G.H., Thumu, U. A review on mechanical properties of epoxy nanocomposites. Mater today Proc. 2020;44:346–355. [Google Scholar]
  35. Gupta A., Kundalkar D., Saxena K.K.. Investigation on deformation of Inconel alloy 751. Mater today Proc. 2021; [Google Scholar]
  36. Bisht P.S., Awasthi A.. Design and Analysis of Composite and Al Alloy Wheel Rim. 2020;15–29. Available from: http://link.springer.com/10.1007/978-981-15-4331-9_2. [Google Scholar]
  37. Awasthi A., Sathish Rao U., Saxena K.K., et al. Impact of equal channel angular pressing on aluminium alloys: An overview. Mater today Proc. 2022; [Google Scholar]
  38. Vishwanatha H., Saxena K.K., Pramanik A., et al. Cryo treatment and corrosion studies of nickel-titanium shape-memory alloy. https://doi.org/101177/09544089231159250 [Internet]. 2023 [cited 2023 Apr 25];095440892311592. Available from: https://journals.sagepub.com/doi/10.1177/09544089231159250. [Google Scholar]
  39. Mabuwa, S., & Msomi, V. (2023). Investigation of the Microstructure and Mechanical Properties in Friction Stir Welded Dissimilar Aluminium Alloy Joints via Sampling Direction. Crystals, 13(7), 1108. [CrossRef] [Google Scholar]
  40. Tański, T., Snopiński, P., Prusik, K., et al. The effects of room temperature ECAP and subsequent aging on the structure and properties of the Al-3%Mg aluminium alloy. Mater CharacT. 2017;133:185–195. [Google Scholar]
  41. Sun, Z., Li, M., Xiao, B., Liu, X., Lin, H., Jiang, B., … & Zhang, Q. (2022). In situ transmission electron microscopy for understanding materials and interfaces challenges in all-solid-state lithium batteries. Etransportation, 14, 100203. [CrossRef] [Google Scholar]
  42. Msomi, V., Mabuwa, S., Ngonda, T., Mehdi, H., & Saxena, K.K. (2023). Microstructure and mechanical properties of tungsten inert gas welded dissimilar aluminum alloys joint subjected to normal multi-pass friction stir process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231207424. [Google Scholar]
  43. Bag, R., Panda, A., Sahoo, A.K., & Kumar, R. (2023). Sustainable high-speed hard machining of AISI 4340 steel under dry environmenT. Arabian Journal for Science and Engineering, 48(3), 3073–3096. [CrossRef] [Google Scholar]
  44. Wu, R., Matta, M., Paulsen, B.D., & Rivnay, J. (2022). Operando Characterization of Organic Mixed Ionic/Electronic Conducting Materials. Chemical Reviews, 122(4), 4493–4551. [Google Scholar]
  45. Rutherford, D., Kolářová, K., Čech, J., Haušild, P., Kuliček, J., Ukraintsev, E., … & Rezek, B. (2024). Correlative atomic force microscopy and scanning electron microscopy of bacteria-diamond-metal nanocomposites. Ultramicroscopy, 258, 113909. [Google Scholar]
  46. Msomi, V.E.L.A.P.H.I., & Mabuwa, S.I.P.O.K.A.Z.I. (2023). Correlation between Microstructure and Bending of FSW and tIG Welded Mg-Rich Aluminium Alloy Joints. Key Engineering Materials, 961, 15–21. [Google Scholar]
  47. Muñoz-Ocaña, J.M., Puerto, J., & Rodríguez-Chía, A.M. (2024). Improved heuristics for solving large-scale Scanning transmission Electron Microscopy image segmentation using the ordered median problem. Computers & Operations Research, 163, 106524. [Google Scholar]
  48. Trang, T.T.T., & Heo, Y.U. (2024). Transmission electron microscopy study on the phase transformation of metastable precipitates to stable phases. Microscopy, 73(1), 1–13. [Google Scholar]
  49. Gupta, P., Rai, N., Verma, A., & Gautam, V. (2024). Microscopy based methods for characterization, drug delivery, and understanding the dynamics of nanoparticles. Medicinal Research Reviews, 44(1), 138–168. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.