Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01011
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202450701011
Published online 29 March 2024
  1. Sun, B., Li, Y., Zhang, M., Xu, X., Zheng, L., Wang, Y., & Bai, G. (2024). Effect of working voltage on the mechanical/corrosion properties of Ni-SiO2-PTFE nanocomposite deposition layer on the inner wall of pipeline. Materials Today Communications, 108338. [Google Scholar]
  2. Jiang, W., Qiu, M., Shen, L., Lou, G., Yang, X., Eckert, K., & Tian, Z. (2021). Effect of deposition current density on the Co–Ni/SiO2 alloy composite coatings using scanning jet electrodeposition. Surface Topography: Metrology and Properties, 9(1), 015027. [Google Scholar]
  3. Ullal, Y., & Chitharanjan Hegde, A. (2013). Corrosion protection of electrodeposited multilayer nanocomposite Zn-Ni-SiO 2 coatings. Surface Engineering and Applied Electrochemistry, 49, 161–167. [Google Scholar]
  4. Damodharan, D., Rajesh Kumar, B., Gopal, K., De Poures, M. V., & Sethuramasamyraja, B. (2019). Utilization of waste plastic oil in diesel engines: A review. Reviews in Environmental Science and Bio/Technology, 18, 681–697. [Google Scholar]
  5. Guerguer, L., Hamdi, A., Ziouche, A., Benbertal, D., Belalem, M. A., & Benmoussat, A. (2023). Influence of surfactant concentration on structural properties and corrosion behaviour of electrodeposited Ni–SiO2 nanocomposite coatings. International Journal of Materials Research, 114(3), 175–190. [Google Scholar]
  6. Dwivedi SP, Yadav AK, Saxena A, Dwivedi VK. Tribo-mechanical, physical and thermal behaviour of Al/Si3N4 composite with and without the addition of Cu, Ni and Cr entropy elements. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;0(0). doi:10.1177/09544089231189663 [Google Scholar]
  7. Raji, A., Nesakumar, J. I. E. T., Mani, S., Perumal, S., Rajangam, V., Thirunavukkarasu, S., & Lee, Y. R. (2021). Biowaste-originated heteroatom-doped porous carbonaceous material for electrochemical energy storage application. Journal of Industrial and Engineering Chemistry, 98, 308–317. [Google Scholar]
  8. Hammami, O., Dhouibi, L., Berçot, P., Rezrazi, E. M., & Triki, E. (2012). Study of Zn-Ni alloy coatings modified by nano-SiO 2 particles incorporation. international Journal of Corrosion, 2012. [Google Scholar]
  9. SudhirSastry, Y. B., Krishna, Y., & Budarapu, P. R. (2015). Parametric studies on buckling of thin walled channel beams. Computational Materials Science, 96, 416–424. [Google Scholar]
  10. Peng, K., Zhou, L., Hu, A., Tang, Y., & Li, D. (2008). Synthesis and magnetic properties of Ni–SiO2 nanocomposites. Materials Chemistry and Physics, 111(1), 34–37. [Google Scholar]
  11. Dwivedi, S.P. (2023), “Development and characterization of grinding sludge-reinforced aluminum-based composite by friction stir process technique”, World Journal of Engineering, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/WJE-12-2022-0484. [Google Scholar]
  12. Xu, Bin-shi, Hai-dou Wang, Shi-yun Dong, Bin Jiang, and Wei-yi Tu. “Electrodepositing nickel silica nano-composites coatings.” Electrochemistry Communications 7, no. 6 (2005): 572–575. [Google Scholar]
  13. Radhakrishnan, S., Khan, A., Dwivedi, S.P. et al. Studies on mechanical, thermal, and water immersion of plant and animal wastage nanofiller–based bio-fiber-reinforced composites. Biomass Conv. Bioref. (2023). https://doi.org/10.1007/s13399-023-04788-4 [Google Scholar]
  14. Peddakrishna, S., & Khan, T. (2018). Design of UWB monopole antenna with dual notched band characteristics by using π-shaped slot and EBG resonator. AEU-International Journal of Electronics and Communications, 96, 107–112. [Google Scholar]
  15. Zhou, H., Yan, S., He, Y., Fan, Y., Yan, L., Cheng, X., … & Song, J. (2023). Preparation of a superhydrophobic Ni/SH-SiO2 coating by one-step electrodeposition and an analysis of its anti-corrosion performance. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 676, 132084. [Google Scholar]
  16. Girish, K. M., Prashantha, S. C., Nagabhushana, H., Ravikumar, C. R., Nagaswarupa, H. P., Naik, R., … & Umesh, B. (2018). Multi-functional Zn2TiO4: Sm3+nanopowders: excellent performance as an electrochemical sensor and an UV photocatalyst. Journal of Science: Advanced Materials and Devices, 3(2), 151–160. [Google Scholar]
  17. Kasturibai, S., & Kalaignan, G. P. (2013). Physical and electrochemical characterizations of Ni-SiO 2 nanocomposite coatings. Ionics, 19, 763–770. [Google Scholar]
  18. Shashi Prakash Dwivedi, S Selvaprakash, Shubham Sharma, Soni Kumari, Kuldeep K Saxena, Rajesh Goyal, Amjad Iqbal & Faramarz Djavanroodi (2023): Evaluation of various properties for spent alumina catalyst and Si3N4 reinforced with PET-based polymer composite, Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2023.2249888 [Google Scholar]
  19. Parashuram, L., Sreenivasa, S., Akshatha, S., & Udayakumar, V. (2019). A non-enzymatic electrochemical sensor based on ZrO2: Cu (I) nanosphere modified carbon paste electrode for electro-catalytic oxidative detection of glucose in raw Citrus aurantium var. sinensis. Food chemistry, 300, 125178. [Google Scholar]
  20. Yadav, S., Sharma, P., Yamasani, P., Minaev, S., & Kumar, S. (2014). A prototype micro-thermoelectric power generator for micro-electromechanical systems. Applied Physics Letters, 104(12). [Google Scholar]
  21. Grover, T., Pandey, A., Kumari, S. T., Awasthi, A., Singh, B., Dixit, P., … & Saxena, K. K. (2020). Role of titanium in bio implants and additive manufacturing: An overview. Materials Today: Proceedings, 26, 3071–3080. [Google Scholar]
  22. Yan, L., Yu, S. R., Liu, J. D., Han, Z. W., & Yuan, D. S. (2011). Microstructure and wear resistance of electrodeposited Ni-SiO2 nano-composite coatings on AZ91HP magnesium alloy substrate. Transactions of Nonferrous Metals Society of China, 21, s483–s488. [Google Scholar]
  23. Shashi Prakash Dwivedi, Shubham Sharma, B. Vijay Krishna, Pankaj Sonia, Kuldeep Kumar Saxena, Amjad Iqbal & Faramarz Djavanroodi (2023) Effect of the addition of TiB2 with waste glass powder on microstructure, mechanical and physical behavior of PET-based polymer composite material, Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2023.2239229 [Google Scholar]
  24. Farooq, M., Green, A. A., & Hutchins, M. G. (1998). High performance sputtered Ni: SiO2 composite solar absorber surfaces. Solar Energy Materials and Solar Cells, 54(1-4), 67–73. [Google Scholar]
  25. Awasthi, A., Saxena, K. K., & Dwivedi, R. K. (2021). An investigation on classification and characterization of bio materials and additive manufacturing techniques for bioimplants. Materials Today: Proceedings, 44, 2061–2068. [Google Scholar]
  26. Naik, R., Prashantha, S. C., Nagabhushana, H., Sharma, S. C., Nagaswarupa, H. P., Anantharaju, K. S., … & Girish, K. M. (2016). Tunable white light emissive Mg2SiO4: Dy3+ nanophosphor: its photoluminescence, Judd–Ofelt and photocatalytic studies. Dyes and Pigments, 127, 25–36. [Google Scholar]
  27. Zhao, B., Shao, G., Fan, B., Zhao, W., & Zhang, R. (2015). Investigation of the electromagnetic absorption properties of Ni@ TiO 2 and Ni@ SiO 2 composite microspheres with core–shell structure. Physical Chemistry Chemical Physics, 17(4), 2531–2539. [Google Scholar]
  28. Dwivedi SP, Chaudhary V, Sharma S, Sharma S. Ultrasonic vibration effect in the development of Al/CCLW/alumina metal matrix composite to enhance mechanical properties. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;0(0). doi:10.1177/09544089231200467 [Google Scholar]
  29. Raj, T. V., Hoskeri, P. A., Muralidhara, H. B., Manjunatha, C. R., Kumar, K. Y., & Raghu, M. S. (2020). Facile synthesis of perovskite lanthanum aluminate and its green reduced graphene oxide composite for high performance supercapacitors. Journal of Electroanalytical Chemistry, 858, 113830. [Google Scholar]
  30. Tuaweri, T. J., Jombo, P. P., & Okpala, A. N. (2014). Corrosion resistance characteristics of Zn-Ni/SiO2 composite coatings. International Journal of Advanced Science and Engineerin, 3(2), 1–12. [Google Scholar]
  31. Godavarthi, B., Nalajala, P., & Ganapuram, V. (2017, August). Design and implementation of vehicle navigation system in urban environments using internet of things (IoT). In IOP Conference Series: Materials Science and Engineering (Vol. 225, No. 1, p. 012262). IOP Publishing. [Google Scholar]
  32. Tang, N., Lü, L., Zhong, W., Au, C., & Du, Y. (2009). Synthesis and magnetic properties of carbon-coated Ni/SiO2 core/shell nanocomposites. Science in China Series G: Physics, Mechanics and Astronomy, 52(1), 31–34. [Google Scholar]
  33. Dwivedi SP, Yadav AK, Saxena A, Dwivedi VK. Tribo-mechanical, physical and thermal behaviour of Al/Si3N4 composite with and without the addition of Cu, Ni and Cr entropy elements. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;0(0). doi:10.1177/09544089231189663 [Google Scholar]
  34. Rathod, V. P., & Tanveer, S. (2009). Pulsatile flow of couple stress fluid through a porous medium with periodic body acceleration and magnetic field. Bulletin of the Malaysian Mathematical Sciences Society, 32(2). [Google Scholar]
  35. Canut, B., Blanchin, M. G., Teodorescu, V., & Traverse, A. (2007). Structure of Ni/SiO2 films prepared by sol–gel dip coating. Journal of non-crystalline solids, 353(27), 2646–2653. [Google Scholar]
  36. Vijayakumar, Y., Nagaraju, P., Yaragani, V., Parne, S. R., Awwad, N. S., & Reddy, M. R. (2020). Nanostructured Al and Fe co-doped ZnO thin films for enhanced ammonia detection. Physica B: Condensed Matter, 581, 411976. [Google Scholar]
  37. Isfahani, A. G., & Ghorbani, M. (2014). Electrophoretic deposition of Ni/SiO2 nanocomposite coating: fabrication process and tribological and corrosion properties. Journal of Nano Research, 26, 45–51. [Google Scholar]
  38. Dwivedi, S.P., Chaudhary, V. & Sharma, S. Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy. Inter Metalcast (2023). https://doi.org/10.1007/s40962-023-01117-3. [Google Scholar]
  39. Li, X., Yin, S., & Luo, H. (2020). Fabrication of robust superhydrophobic Ni–SiO2 composite coatings on aluminum alloy surfaces. Vacuum, 181, 109674. [Google Scholar]
  40. Hora, S. K., Poongodan, R., De Prado, R. P., Wozniak, M., & Divakarachari, P. B. (2021). Long short-term memory network-based metaheuristic for effective electric energy consumption prediction. Applied Sciences, 11(23), 11263. [Google Scholar]
  41. Wang, Y., Shen, L., Qiu, M., Tian, Z., Liu, X., & Zhuo, W. (2016). Jet electrodeposition of Ni-SiO2 nanocomposite coatings with online friction and its performance. Journal of The Electrochemical Society, 163(10), D579. [Google Scholar]
  42. Reddy, K. S. P., Roopa, Y. M., LN, K. R., & Nandan, N. S. (2020, July). IoT based smart agriculture using machine learning. In 2020 Second international conference on inventive research in computing applications (ICIRCA) (pp. 130–134). IEEE. [Google Scholar]
  43. Li, R., Hou, Y., & Liang, J. (2016). Electro-codeposition of Ni-SiO2 nanocomposite coatings from deep eutectic solvent with improved corrosion resistance. Applied Surface Science, 367, 449–458. [Google Scholar]
  44. Dhanalaxmi, B., Naidu, G. A., & Anuradha, K. (2015). Adaptive PSO based association rule mining technique for software defect classification using ANN. Procedia Computer Science, 46, 432–442. [Google Scholar]
  45. Sotnikova, A., Ivantsov, M., Kulikov, A., & Kulikova, M. (2024). Influence of MgO promoution to Ni-based composites in hydrogen production methane decomposition process. International Journal of Hydrogen Energy, 57, 1208–1220. [Google Scholar]
  46. Shashi Prakash Dwivedi, Indradeep Kumar, Shankar Sehgal, Nakul Gupta & Kuldeep K. Saxena (2023) Development of dissimilar AA2014 and AA2024 based composite with nano-Si3N4 reinforcement by friction stir process technique, Journal of Adhesion Science and Technology, DOI: 10.1080/01694243.2023.2242111 [Google Scholar]
  47. Jisha, P. K., Prashantha, S. C., & Nagabhushana, H. (2017). Luminescent properties of Tb doped gadolinium aluminate nanophosphors for display and forensic applications. Journal of Science: Advanced Materials and Devices, 2(4), 437–444. [Google Scholar]
  48. Nagar, S., Mukherjee, G. S., & Banerjee, M. (2024). Studies on the structural and magnetic properties of PMMA/Ni nanocomposite system prepared by embedding Ni nanoparticles in the PMMA films. Materials Chemistry and Physics, 314, 128913. [Google Scholar]
  49. Shashi Prakash Dwivedi, Shubham Sharma, Changhe Li, Yanbin Zhang, Abhinav Kumar, Rajesh Singh, Sayed M. Eldin, Mohamed Abbas, Effect of nano-TiO2 particles addition on dissimilar AA2024 and AA2014 based composite developed by friction stir process technique, Journal of Materials Research and Technology, Volume 26, 2023, Pages 1872–1881, https://doi.org/10.1016/j.jmrt.2023.07.234. [Google Scholar]
  50. Fu, X., Liu, J., Song, Z., Fu, H., Lin, J., Wang, L., … & Gao, G. Effect of Current Density on the Corrosion Resistance of Ni-Co-Si3n4 Composite Coatings Prepared by Jet Electrodeposition on the Surface of the Rotating Body. Available at SSRN 4718129. [Google Scholar]
  51. Alrobei, H., Prashanth, M. K., Manjunatha, C. R., Kumar, C. P., Chitrabanu, C. P., Shivaramu, P. D., … & Raghu, M. S. (2021). Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms, kinetics and statistical error analysis. Ceramics International, 47(7), 10322–10331. [Google Scholar]
  52. Du, H., Ren, J., Zhang, D., Li, X., Zhang, W., & Yang, R. (2024). Facile fabrication Ni@ SiO2/C derived from polysilsesquioxane as strong and broadband microwave absorbers with infrared stealth, flame retardant, and water resistant functions. Composites Part A: Applied Science and Manufacturing, 177, 107884. [Google Scholar]
  53. Kota, V. R., & Bhukya, M. N. (2019). A novel global MPP tracking scheme based on shading pattern identification using artificial neural networks for photovoltaic power generation during partial shaded condition. IET Renewable Power Generation, 13(10), 1647–1659. [Google Scholar]
  54. Soliman, A., Tschentscher, R., Akporiaye, D., & Al-Rawashdeh, M. M. Effect of Ni/Sio2 Catalyst Preparation Method on Methane Decomposition and Co2 Gasification Cycles. Available at SSRN 4681005. [Google Scholar]
  55. Pethampalayam Karuppanan Miniappan, Sivagnanam Marimuthu*, Selvan Dharani Kumar, Gopal Gokilakrishnan, Shubham Sharma*, Changhe Li, Shashi Prakash Dwivedi, and Mohamed Abbas, “Mechanical, fracture-deformation, and tribology behavior of fillers-reinforced sisal fiber composites for lightweight automotive applications” Reviews on Advanced Materials Science 2023; 62: 20230342 [Google Scholar]
  56. Pinzon, L. V. A., Romano, P. N., Garcia, M. A. S., Aranda, D. A. G., & de Almeida, J. M. A. R. (2024). Cooperative Catalytic Transfer for One-Pot Hydrolysis/Hydrogenation of Refined Palm Oil Using Formic Acid as a Hydrogen Source. Industrial & Engineering Chemistry Research. [Google Scholar]
  57. Kulandaivel, D., Rahamathullah, I. G., Sathiyagnanam, A. P., Gopal, K., & Damodharan, D. (2020). Effect of retarded injection timing and EGR on performance, combustion and emission characteristics of a CRDi diesel engine fueled with WHDPE oil/diesel blends. Fuel, 278, 118304. [Google Scholar]
  58. Yin, D., Hu, Z., Liu, M., Zhang, J., Zheng, H., Hou, Y., … & Liu, Y. (2024). Highly stereoselective hydrogenation of α-pinene over Ir nanoparticles confined in SiO2 shells. Chemical Engineering Journal, 149374. [Google Scholar]
  59. Ma, L., Zhou, S., Liu, Z., & Wang, S. Carbon-Dots/ Nickel Nanocomposite Coating for Wear and Corrosion Control on Mg Alloy: Experimental and Theoretical Studies. Nickel Nanocomposite Coating for Wear and Corrosion Control on Mg Alloy: Experimental and Theoretical Studies. [Google Scholar]
  60. Silviana, S., Saputra, B., Oktavian, H. D. A., Arrois, S., Agung, G. W., Situmorang, B., … & Sa’adah, A. N. M. (2024, February). Rice husk as a potential source for the sol-gel synthesis of diphenylcarbazide immobilized silica adsorbent for the adsorption of lead. In AIP Conference Proceedings (Vol. 2710, No. 1). AIP Publishing. [Google Scholar]
  61. Shamshirsaz, M., Fereidoon, A., Albooyeh, A., & Danaee, I. (2022). Corrosion resistance, thermal diffusivity and mechanical properties of Ni–SiO2 nanocomposite coatings on a 316 stainless steel for heat exchanger applications. Materials Testing, 64(12), 1733–1752. [Google Scholar]
  62. Akande, I. G., Fayomi, O. S. I., Popoola, A. P. I., Daantjie, T., Oluwole, O. O., & Olatunji, B. O. (2022). Development of Ni–Al2SiO5/Ni–SiO2 Coating Doped with Benzotriazole: Corrosion, Structural Evolution and Thermal Degradation Study. Portugaliae Electrochimica Acta, 40(6), 451–462. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.