Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01017
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202450701017
Published online 29 March 2024
  1. Dwivedi, S.P. (2023), “Development and characterization of grinding sludge-reinforced aluminum-based composite by friction stir process technique”, World Journal of Engineering, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/WJE-12-2022-0484. [Google Scholar]
  2. Muvvala, G., Karmakar, D. P., & Nath, A. K. (2017). Online assessment of TiC decomposition in laser cladding of metal matrix composite coating. Materials & Design, 121, 310–320. [Google Scholar]
  3. Unveroglu, B. (2023). Electrodeposition and characterization of Ni-Cu alloy and submicron-sized CeO2 reinforced Ni-Cu metal matrix composite coatings. Arabian Journal for Science and Engineering, 48(1), 145–157. [Google Scholar]
  4. Vijayakumar, Y., Nagaraju, P., Yaragani, V., Parne, S. R., Awwad, N. S., & Reddy, M. R. (2020). Nanostructured Al and Fe co-doped ZnO thin films for enhanced ammonia detection. Physica B: Condensed Matter, 581, 411976. [Google Scholar]
  5. Damodharan, D., Rajesh Kumar, B., Gopal, K., De Poures, M. V., & Sethuramasamyraja, B. (2019). Utilization of waste plastic oil in diesel engines: A review. Reviews in Environmental Science and Bio/Technology, 18, 681–697. [Google Scholar]
  6. Kumar, R., & Das, A. K. (2022). Tribological behaviour of TiB2 ceramic based composite coating deposited on stainless steel AISI 304 by gas tungsten arc (GTA) cladding process. Surface Topography: Metrology and Properties, 10(3), 035012. [Google Scholar]
  7. Singh, S., Gupta, D., & Kaushal, S. (2020). Dry sliding wear performance of Ni–SiC composites developed through an in situ microwave casting process. Journal of Tribology, 142(10), 101704. [Google Scholar]
  8. Girish, K. M., Prashantha, S. C., Nagabhushana, H., Ravikumar, C. R., Nagaswarupa, H. P., Naik, R., … & Umesh, B. (2018). Multi-functional Zn2TiO4: Sm3+ nanopowders: excellent performance as an electrochemical sensor and an UV photocatalyst. Journal of Science: Advanced Materials and Devices, 3(2), 151–160. [Google Scholar]
  9. Naik, R., Prashantha, S. C., Nagabhushana, H., Sharma, S. C., Nagaswarupa, H. P., Anantharaju, K. S., … & Girish, K. M. (2016). Tunable white light emissive Mg2SiO4: Dy3+ nanophosphor: its photoluminescence, Judd–Ofelt and photocatalytic studies. Dyes and Pigments, 127, 25–36. [Google Scholar]
  10. Camagu, S. T. (2021). Nial and steel as matrices and tic and oxynitrides as reinforcements in metal-matrix composite fabrication. [Google Scholar]
  11. Zhang, H., Xu, F., Wang, J., & Liu, X. (2022). Impact of SiC particle size upon the microstructure and characteristics of Ni-SiC nanocomposites. Journal of the Indian Chemical Society, 99(6), 100474. [Google Scholar]
  12. Rathod, V. P., & Tanveer, S. (2009). Pulsatile flow of couple stress fluid through a porous medium with periodic body acceleration and magnetic field. Bulletin of the Malaysian Mathematical Sciences Society, 32(2). [Google Scholar]
  13. Jisha, P. K., Prashantha, S. C., & Nagabhushana, H. (2017). Luminescent properties of Tb doped gadolinium aluminate nanophosphors for display and forensic applications. Journal of Science: Advanced Materials and Devices, 2(4), 437–444. [Google Scholar]
  14. Rodriguez, J. A., Evans, J., Feria, L., Vidal, A. B., Liu, P., Nakamura, K., & Illas, F. (2013). CO2 hydrogenation on Au/TiC, Cu/TiC, and Ni/TiC catalysts: Production of CO, methanol, and methane. Journal of catalysis, 307, 162–169. [Google Scholar]
  15. Alrobei, H., Prashanth, M. K., Manjunatha, C. R., Kumar, C. P., Chitrabanu, C. P., Shivaramu, P. D., … & Raghu, M. S. (2021). Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms, kinetics and statistical error analysis. Ceramics International, 47(7), 10322–10331. [Google Scholar]
  16. Kulandaivel, D., Rahamathullah, I. G., Sathiyagnanam, A. P., Gopal, K., & Damodharan, D. (2020). Effect of retarded injection timing and EGR on performance, combustion and emission characteristics of a CRDi diesel engine fueled with WHDPE oil/diesel blends. Fuel, 278, 118304. [Google Scholar]
  17. Castel, V., Brosseau, C., & Ben Youssef, J. (2009). Magnetoelectric effect in BaTiO3/Ni particulate nanocomposites at microwave frequencies. Journal of applied physics, 106(6). [Google Scholar]
  18. Hora, S. K., Poongodan, R., De Prado, R. P., Wozniak, M., & Divakarachari, P. B. (2021). Long short-term memory network-based metaheuristic for effective electric energy consumption prediction. Applied Sciences, 11(23), 11263. [Google Scholar]
  19. Raj, T. V., Hoskeri, P. A., Muralidhara, H. B., Manjunatha, C. R., Kumar, K. Y., & Raghu, M. S. (2020). Facile synthesis of perovskite lanthanum aluminate and its green reduced graphene oxide composite for high performance supercapacitors. Journal of Electroanalytical Chemistry, 858, 113830. [Google Scholar]
  20. Parashuram, L., Sreenivasa, S., Akshatha, S., & Udayakumar, V. (2019). A non-enzymatic electrochemical sensor based on ZrO2: Cu (I) nanosphere modified carbon paste electrode for electro-catalytic oxidative detection of glucose in raw Citrus aurantium var. sinensis. Food chemistry, 300, 125178. [Google Scholar]
  21. Reddy, K. S. P., Roopa, Y. M., LN, K. R., & Nandan, N. S. (2020, July). IoT based smart agriculture using machine learning. In 2020 Second international conference on inventive research in computing applications (ICIRCA) (pp. 130–134). IEEE. [Google Scholar]
  22. Godavarthi, B., Nalajala, P., & Ganapuram, V. (2017, August). Design and implementation of vehicle navigation system in urban environments using internet of things (IoT). In IOP Conference Series: Materials Science and Engineering (Vol. 225, No. 1, p. 012262). IOP Publishing. [Google Scholar]
  23. Brosseau, C., Castel, V., & Potel, M. (2010). Controlled extrinsic magnetoelectric coupling in BaTiO3/Ni nanocomposites: Effect of compaction pressure on interfacial anisotropy. Journal of applied physics, 108(2). [Google Scholar]
  24. Yadav, S., Sharma, P., Yamasani, P., Minaev, S., & Kumar, S. (2014). A prototype micro-thermoelectric power generator for micro-electromechanical systems. Applied Physics Letters, 104(12). [Google Scholar]
  25. SudhirSastry, Y. B., Krishna, Y., & Budarapu, P. R. (2015). Parametric studies on buckling of thin walled channel beams. Computational Materials Science, 96, 416–424. [Google Scholar]
  26. Raji, A., Nesakumar, J. I. E. T., Mani, S., Perumal, S., Rajangam, V., Thirunavukkarasu, S., & Lee, Y. R. (2021). Biowaste-originated heteroatom-doped porous carbonaceous material for electrochemical energy storage application. Journal of Industrial and Engineering Chemistry, 98, 308–317. [Google Scholar]
  27. Peddakrishna, S., & Khan, T. (2018). Design of UWB monopole antenna with dual notched band characteristics by using π-shaped slot and EBG resonator. AEU-International Journal of Electronics and Communications, 96, 107–112. [Google Scholar]
  28. Bhukya, M. N., Kota, V. R., & Depuru, S. R. (2019). A simple, efficient, and novel standalone photovoltaic inverter configuration with reduced harmonic distortion. IEEE access, 7, 43831–43845. [Google Scholar]
  29. Awasthi, A., Saxena, K. K., & Dwivedi, R. K. (2021). An investigation on classification and characterization of bio materials and additive manufacturing techniques for bioimplants. Materials Today: Proceedings, 44, 2061–2068. [Google Scholar]
  30. Naresh, M., & Munaswamy, P. (2019). Smart agriculture system using IoT technology. International journal of recent technology and engineering, 7(5), 98–102. [Google Scholar]
  31. Ramprasad, P., Basavapoornima, C., Depuru, S. R., & Jayasankar, C. K. (2022). Spectral investigations of Nd3+: Ba (PO3) 2+ La2O3 glasses for infrared laser gain media applications. Optical Materials, 129, 112482. [Google Scholar]
  32. Radhakrishnan, S., Khan, A., Dwivedi, S.P. et al. Studies on mechanical, thermal, and water immersion of plant and animal wastage nanofiller–based bio-fiber-reinforced composites. Biomass Conv. Bioref. (2023). https://doi.org/10.1007/s13399-023-04788-4 [Google Scholar]
  33. Shashi Prakash Dwivedi, S Selvaprakash, Shubham Sharma, Soni Kumari, Kuldeep K Saxena, Rajesh Goyal, Amjad Iqbal & Faramarz Djavanroodi (2023): Evaluation of various properties for spent alumina catalyst and Si3N4 reinforced with PET-based polymer composite, Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2023.2249888 [Google Scholar]
  34. Grover, T., Pandey, A., Kumari, S. T., Awasthi, A., Singh, B., Dixit, P., … & Saxena, K. K. (2020). Role of titanium in bio implants and additive manufacturing: An overview. Materials Today: Proceedings, 26, 3071–3080. [Google Scholar]
  35. Shashi Prakash Dwivedi, Shubham Sharma, B. Vijay Krishna, Pankaj Sonia, Kuldeep Kumar Saxena, Amjad Iqbal & Faramarz Djavanroodi (2023) Effect of the addition of TiB2 with waste glass powder on microstructure, mechanical and physical behavior of PET-based polymer composite material, Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2023.2239229 [Google Scholar]
  36. Rajkumar, G.; Saravanan, M.; Bejaxhin, A.B.H.; Sharma, S.; Dwivedi, S.P.; Kumar, R.; Singh, S. Parametric Optimization of Powder-Mixed EDM of AA2014/Si3N4/Mg/Cenosphere Hybrid Composites Using Fuzzy Logic: Analysis of Mechanical, Machining, Microstructural, and Morphological Characterizations. J. Compos. Sci. 2023, 7, 380. https://doi.org/10.3390/jcs7090380. [Google Scholar]
  37. Sumit Kanchan, Swastik Pradhan, Rajeev Kumar, Shubham Sharma, Omang Bhandari, Manisha Priyadarshini, Shashi Prakash Dwivedi, Fuad A. Awwad, M. Ijaz Khan, Emad A. A. Ismail, Renu Dhiman, “Developing a model for waste plastic biofuels in CRDi diesel engines using FTIR, GCMS, and WASPAS synchronisations for engine analysis” Energy Exploration & Exploitation, 2023 DOI: 10.1177/01445987231216762 [Google Scholar]
  38. Dwivedi SP, Chaudhary V, Sharma S, Sharma S. Ultrasonic vibration effect in the development of Al/CCLW/alumina metal matrix composite to enhance mechanical properties. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;0(0). doi:10.1177/09544089231200467 [Google Scholar]
  39. Dwivedi SP, Yadav AK, Saxena A, Dwivedi VK. Tribo-mechanical, physical and thermal behaviour of Al/Si3N4 composite with and without the addition of Cu, Ni and Cr entropy elements. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;0(0). doi:10.1177/09544089231189663 [Google Scholar]
  40. Shashi Prakash Dwivedi & Shubham Sharma (2023) Effect of Ni addition on the behavior of dissimilar A356-AZ91/CeO2 aluminum-magnesium based composite fabricated by friction stir process technique, Composite Interfaces, DOI: 10.1080/09276440.2023.2260236 [Google Scholar]
  41. Dikshit, M. K., Singh, S., Pathak, V. K., Saxena, K. K., Agrawal, M. K., Malik, V., … & Khan, M. I. (2023). Surface characteristics optimization of biocompatible Ti6Al4V with RCCD and NSGA II using die sinking EDM. Journal of Materials Research and Technology, 24, 223–235. [CrossRef] [Google Scholar]
  42. Fang, Y., Lanagan, M. T., Agrawal, D. K., Yang, G. Y., Randall, C. A., Shrout, T. R., … & Tajuddin, A. (2005). An investigation demonstrating the feasibility of microwave sintering of base-metal-electrode multilayer capacitors. Journal of electroceramics, 15, 13–19. [Google Scholar]
  43. Shubham Sharma, Shashi Prakash Dwivedi, Changhe Li, Fuad A. Awwad, M. Ijaz Khan, Emad A.A. Ismail, Unveiling of grain structure, porosity, phase distributions, microstructural morphology, surface hardness, and tribo-corrosion characteristics of nickel, and titanium dioxide-based SS-304 steel microwave composite coatings cladding, Journal of Materials Research and Technology, 2023, https://doi.org/10.1016/j.jmrt.2023.12.144. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.