Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01024
Number of page(s) 9
DOI https://doi.org/10.1051/e3sconf/202450701024
Published online 29 March 2024
  1. Madhu B P, Vijaya Raghu B, “Numerical simulation of supersonic expansion in conical and contour, nozzle”, International Journal of Engineering Research & Technology, Vol. 3, No. 6, pp 1721–25, 2014. [Google Scholar]
  2. Davis Katlin, Fortner E, Heard M, McCallum H, Putzke H., Experimental and computational investigation of a dual-bell nozzle, Worcester Polytechnic Institute, Report No.: JB3-DNB1, 2014 [Google Scholar]
  3. Nazar Muneam Mahmood, “Simulation of back pressure effect on behaviour of convergent divergent nozzle”, Diyala Journal of Engineering Sciences, Vol. 06, No. 01, pp 105–120, 2013. [Google Scholar]
  4. Md Akhtar Khan, Sanjay Kumar Sardiwal, M.V.Sai Sharath, D.Harika Chowdary, “Design of a Supersonic Nozzle using Method of Characteristics”, International Journal of Engineering Research & Technology, Vol.2, No. 11, pp 19–24, 2013. [Google Scholar]
  5. Toufik Zebbiche, “Supersonic axisymmetric minimum length nozzle conception at high temperature with application for air”, International Journal of Aeronautical and Space Sciences, Vol. 9, No. 1, pp.1–30, May, 2008. [Google Scholar]
  6. Wilbur Chang, “Design and development of a rectangular supersonic wind tunnel facility for the study of shock/boundary layer interactions”,M.S. thesis, University of Illinois at Urbana-Champaign, 2011. [Google Scholar]
  7. Ashwini, S., Prashantha, S. C., Naik, R., & Nagabhushana, H. (2019). Enhancement of luminescence intensity and spectroscopic analysis of Eu3+ activated and Li+ charge-compensated Bi2O3 nanophosphors for solid-state lighting. Journal of Rare Earths, 37(4), 356–364. [Google Scholar]
  8. Anderson, J. D., “Fundamentals of Aerodynamics”, Fourth Edition. New York: McGraw-Hill Education, 2007 [Google Scholar]
  9. Satyanarayana G, Varun C, Naidu SS. CFD analysis of convergent-divergent nozzle. Acta Technica Corviniensis-Bulletin of Engineering. 2013 Jul 1;6(3):139. [Google Scholar]
  10. Bui T. CFD Analysis of the Nozzle Jet Plume Effects on Sonic Boom Signature. In47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition 2009 Sep (p. 1054). [Google Scholar]
  11. Sushma L, Deepik AU, Sunnam SK, Madhavi M. CFD investigation for different nozzle jets. Materials Today: Proceedings. 2017 Jan 1;4(8):9087–94. [Google Scholar]
  12. Saxena, A., Kumaraswamy, A., Dwivedi, S. P., Srivastava, A. K., & Maurya, N. K. (2020). Experimental and computational investigation on dynamic fracture toughness (J1d) behavior of multi-pass SMA armor steel weldments. Theoretical and Applied Fracture Mechanics, 106, 102502. [Google Scholar]
  13. Basavapoornima C, Kesavulu CR, Maheswari T, Pecharapa W, Depuru SR, Jayasankar CK. Spectral characteristics of Pr3+-doped lead based phosphate glasses for optical display device applications. Journal of Luminescence. 2020 Dec 1;228:117585. [Google Scholar]
  14. Yadav S, Sharma P, Yamasani P, Minaev S, Kumar S. A prototype micro-thermoelectric power generator for micro-electromechanical systems. Applied Physics Letters. 2014 Mar 24;104(12). [Google Scholar]
  15. Tripathi, G. P., Agarwal, S., Awasthi, A., & Arun, V. (2022, August). Artificial Hip Prostheses Design and Its Evaluation by Using Ansys Under Static Loading Condition. In Biennial International Conference on Future Learning Aspects of Mechanical Engineering (pp. 815–828). Singapore: Springer Nature Singapore. [Google Scholar]
  16. Bhukya MN, Kota VR, Depuru SR. A simple, efficient, and novel standalone photovoltaic inverter configuration with reduced harmonic distortion. IEEE access. 2019 Apr 4;7:43831–45. [Google Scholar]
  17. Vijayakumar Y, Nagaraju P, Yaragani V, Parne SR, Awwad NS, Reddy MR. Nanostructured Al and Fe codoped ZnO thin films for enhanced ammonia detection. Physica B: Condensed Matter. 2020 Mar 15;581:411976. [Google Scholar]
  18. Srivastava, A. K., Nag, A., Dixit, A. R., Tiwari, S., & Srivastava, V. S. (2019). Parametric study during abrasive water jet turning of hybrid metal matrix composite. In Advances in Manufacturing Engineering and Materials: Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia (pp. 72–84). Springer International Publishing. [Google Scholar]
  19. Manohar, T., Prashantha, S. C., Nagaswarupa, H. P., Naik, R., Nagabhushana, H., Anantharaju, K. S., … & Premkumar, H. B. (2017). White light emitting lanthanum aluminate nanophosphor: near ultra violet excited photoluminescence and photometric characteristics. Journal of Luminescence, 190, 279–288. [Google Scholar]
  20. Kumar, C. P., Raghu, M. S., Prathibha, B. S., Prashanth, M. K., Kanthimathi, G., Kumar, K. Y., … & Alharthi, F. A. (2021). Discovery of a novel series of substituted quinolines acting as anticancer agents and selective EGFR blocker: Molecular docking study. Bioorganic & Medicinal Chemistry Letters, 44, 128118. [Google Scholar]
  21. Singh B, Kumar I, Saxena KK, Mohammed KA, Khan MI, Moussa SB, Abdullaev SS. A future prospects and current scenario of aluminium metal matrix composites characteristics. Alexandria Engineering Journal. 2023 Aug 1;76:1–7. [Google Scholar]
  22. Yue L, Jayapal M, Cheng X, Zhang T, Chen J, Ma X, Dai X, Lu H, Guan R, Zhang W. Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Applied Surface Science. 2020 May 15;512:145686. [Google Scholar]
  23. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K. (2016). Design and performance analysis of SOA–MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48, 1–15. [Google Scholar]
  24. Goud JS, Srilatha P, Kumar RV, Kumar KT, Khan U, Raizah Z, Gill HS, Galal AM. Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Studies in Thermal Engineering. 2022 Jul 1;35:102113. [Google Scholar]
  25. Alkorbi, A. S., Kumar, K. Y., Prashanth, M. K., Parashuram, L., Abate, A., Alharti, F. A., … & Raghu, M. S. (2022). Samarium vanadate affixed sulfur self doped g-C3N4 heterojunction; photocatalytic, photoelectrocatalytic hydrogen evolution and dye degradation. International Journal of Hydrogen Energy, 47(26), 12988–13003. [Google Scholar]
  26. Reddy PV, Reddy BV, Rao PS. A numerical study on tube hydroforming process to optimize the process parameters by Taguchi method. Materials Today: Proceedings. 2018 Jan 1;5(11):25376–81. [Google Scholar]
  27. Swarna, K. S. V., Vinayagam, A., Ananth, M. B. J., Kumar, P. V., Veerasamy, V., & Radhakrishnan, P. (2022). A KNN based random subspace ensemble classifier for detection and discrimination of high impedance fault in PV integrated power network. Measurement, 187, 110333. [Google Scholar]
  28. Gupta, T. K., Srivastava, A. K., & Srivastava, V. S. (2021). Microstructural and tensile behaviour of hybrid MMC Al7075/SiC/B4C produced by mechanical stir casting. Materials Today: Proceedings, 47, 4107–4113. [Google Scholar]
  29. Srinivasan, K., Porkumaran, K., & Sainarayanan, G. (2009, August). Improved background subtraction techniques for security in video applications. In 2009 3rd International Conference on Anti-counterfeiting, Security, and Identification in Communication (pp. 114–117). IEEE. [Google Scholar]
  30. Francis V, Garg S, Saxena KK, Jain PK, Lade J, Kumar D. Effect of chemical and heat treatment on 3D printed parts: Nanoparticles embedment approach. Advances in Materials and Processing Technologies. 2022 Nov 30;8(sup4):2277–88. [Google Scholar]
  31. Misra RK, Porwal R, Saxena KK, Godara SS. Effect of post weld heat treatment on mechanical properties of MIG welded mild steel. Advances in Materials and Processing Technologies. 2022 Sep 30;8(sup2):489–503. [Google Scholar]
  32. Singh L, Yahya MM, Singh B, Sehgal S, Saxena KK, Mohammed KA. Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083. Metal Science and Heat Treatment. 2023 Dec 20:1–5. [Google Scholar]
  33. Lee, H. J. (2017). CFD Performance of Turbulence Models for Flow from Supersonic Nozzle Exhausts. 34. Siswantara, A. I., Pujowidodo, H., Budiyanto, M. A., Gunadi, G. R., & Widiawaty, C. D. (2021). An investigation turbulence model of standard k- to get optimum parameters of turbulence constants (cμ, c1, and c2) of compressible fluid dynamics in a confined jet. Journal of Southwest Jiaotong University, 56(5). [Google Scholar]
  34. Verma M, Meena RK, Singh I, Gupta N, Saxena KK, Reddy MM, Salem KH, Salmaan U. Investigation on the impact of elevated temperature on sustainable geopolymer composite. Advances in Mechanical Engineering. 2023 Sep;15(9):16878132231196402. [Google Scholar]
  35. Zahir, S., Aamer, U. B., Haque, A. U., & Qureshi, K. R. (2023, August). Wind tunnel’s supersonic CD nozzle design and flow analysis. In 17th Asian Congress of Fluid Mechanics (ACFM 2023) (Vol. 2023, pp. 295–299). IET. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.