Open Access
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01067
Number of page(s) 8
Published online 29 March 2024
  1. Prakash, S., K. Surendra Babu, Akash Pankaj, and Alok Kumar Ajit. “Effect of Mach number and turbulent characteristics of chevrons nozzles in high-speed aircraft jet-CFD analysis by aero acoustic phenomenon.” In AIP Conference Proceedings, (2023): 2523, 1. AIP Publishing, [Google Scholar]
  2. Sarweswaran, R., A. Muthuram, S. Seralathan, T. S. Abzal, K. Vinay Kumar Joseph, and P. Kishore. “Experimental and Numerical Analysis of Flow Acoustics Over Different Co-annular Nozzle Shapes.” In International Conference on Intelligent Manufacturing and Energy Sustainability, (2023): 317-327. Singapore: Springer Nature Singapore, [Google Scholar]
  3. Kumar, R. Ramesh, J. M. Babu, Bahaa Saleh, A. Chandrashekar, Kuldeep K. Saxena, A. Deepak, Abdul Razak, Abdulrajak Buradi, and Abiot Ketema. “Investigation of friction welding parameters of AISI 304L/Ti-6AL-4V joints.” Materials Research Express 9, 10 (2022): 106515. [Google Scholar]
  4. Cican, Grigore, Mihnea Gall, Alina Bogoi, Marius Deaconu, and Daniel Eugeniu Crunțeanu. “Experimental Investigation of a Micro Turbojet Engine Chevrons Nozzle by Means of the Schlieren Technique.” Inventions 8, 6 (2023): 145. [Google Scholar]
  5. Singh, P., Singh, A. K., Arun, V., & Dixit, H. K. (2016). Design and analysis of all-optical half-adder, half-subtractor and 4-bit decoder based on SOA-MZI configuration. Optical and Quantum Electronics, 48, 1-14. [Google Scholar]
  6. Abdul Ameer, Hawraa R., Amer N. Jarad, Karrar Hazim Salem, Hadeel S. Hadi, Mohammed Ayad Alkhafaji, Rahman S. Zabibah, Kahtan A. Mohammed, Kuldeep Kumar Saxena, Dharam Buddhi, and Harjit Singh. “A role of back contact and temperature on the parameters of CdTe solar cell.” Advances in Materials and Processing Technologies (2023): 1-9. [Google Scholar]
  7. Abid, Hussain Ali, Annabel P. Markesteijn, Sergey A. Karabasov, Hasan Kamliya Jawahar, and Mahdi Azarpeyvand. “Numerical Investigation of Jet Installation Noise for Chevron Nozzles.” In AIAA AVIATION (2023): 3934. 2023. [Google Scholar]
  8. Shanbhag, Tejal K., Beckett Zhou, Carlos Ilario, and Juan J. Alonso. “An AD framework for jet noise minimization using geometrical acoustics.” In AIAA SCITECH 2024 Forum, 2309. 2024. [Google Scholar]
  9. Lindblad, D., Sherwin, S. J., Cantwell, C. D., Lawrence, J., Proenca, A., & Moragues Ginard, M.. “Aeroacoustic Analysis of a Closely Installed Chevron Nozzle Jet using the High-Order Discontinuous Galerkin Method”. In AIAA AVIATION (2023): 3831. [Google Scholar]
  10. Alkorbi, A. S., Kumar, K. Y., Prashanth, M. K., Parashuram, L., Abate, A., Alharti, F. A., ... & Raghu, M. S. (2022). Samarium vanadate affixed sulfur self doped g-C3N4 heterojunction; photocatalytic, photoelectrocatalytic hydrogen evolution and dye degradation. International Journal of Hydrogen Energy, 47(26), 12988-13003. [Google Scholar]
  11. Srinivasan, K., Porkumaran, K., & Sainarayanan, G. (2009, August). Improved background subtraction techniques for security in video applications. In 2009 3rd International Conference on Anti-counterfeiting, Security, and Identification in Communication (pp. 114-117). IEEE. [Google Scholar]
  12. Wani, Irfan Nazir, S. Chaitanya, Deepak Singh Sisodiya, and Ankur Kulshreshtha. “Design And Acoustic Analysis of N8 Chevron Nozzle with Varied Tip Angle (β).” [Google Scholar]
  13. Sagar, Shiv. “Modelling and CFD Acoustic Analysis of Different Chevron Nozzles using Ansys for Jet Noise Reduction.” PhD diss., National Institute of Technology Patna, (2022). [Google Scholar]
  14. Kumar, C. P., Raghu, M. S., Prathibha, B. S., Prashanth, M. K., Kanthimathi, G., Kumar, K. Y., ... & Alharthi, F. A. (2021). Discovery of a novel series of substituted quinolines acting as anticancer agents and selective EGFR blocker: Molecular docking study. Bioorganic & Medicinal Chemistry Letters, 44, 128118. [Google Scholar]
  15. Jawahar, Hasan Kamliya, Stefano Meloni, and Roberto Camussi. “Jet noise sources for chevron nozzles in under-expanded condition.” International Journal of Aeroacoustics (2022): 1475472X221101766. [Google Scholar]
  16. Cican, Grigore, Marius Deaconu, and Daniel-Eugeniu Crunteanu. “Impact of using chevrons nozzle on the acoustics and performances of a micro turbojet engine.” Applied Sciences 11, 11 (2021): 5158. [Google Scholar]
  17. Sarweswaran, R., Peddada Aakarsh, Praveen Kumar, P. Manivannan, and S. Sathish. “Analysis of acoustic flow on different nozzle exit shapes.” In AIP Conference Proceedings, (2022): 2385, 1. AIP Publishing. [Google Scholar]
  18. Ranjan, Nishant, Ranvijay Kumar, Sandeep Kumar, Deepak Kumar, and Kuldeep K. Saxena. “Innovative high-performance metal reinforced polymers composites for 3D printing applications: a review.” Advances in Materials and Processing Technologies (2023): 1-14. [Google Scholar]
  19. Ashwini, S., Prashantha, S. C., Naik, R., & Nagabhushana, H. (2019). Enhancement of luminescence intensity and spectroscopic analysis of Eu3+ activated and Li+ charge-compensated Bi2O3 nanophosphors for solid-state lighting. Journal of Rare Earths, 37(4), 356-364. [Google Scholar]
  20. Kotian, Shreyas, Nishant Jain, Nachiket Methekar, and Shailesh Nikam. “Turbulent Characteristics of Compressible Jet from a Chevron Nozzle: A Numerical Study.” In Conference on Fluid Mechanics and Fluid Power, (2021):81-86. Singapore: Springer Nature Singapore, 2021. [Google Scholar]
  21. Smyk, Emil, and Marek Markowicz. “Acoustic and flow aspects of synthetic jet actuators with chevron orifices.” Applied Sciences 11, 2 (2021): 652. [Google Scholar]
  22. Ujjin, Rapee, Choosak Ngaongam, Chatmongkol Phoomee, and Jirantanin Kanabkaew. “Acoustic Power Prediction of High BPR Turbofan Engine with Chevron Nozzle during Take-off and Landing.” In IOP Conference Series: Materials Science and Engineering, 886 (1) (2020): 012005. IOP Publishing. [Google Scholar]
  23. Swarna, K. S. V., Vinayagam, A., Ananth, M. B. J., Kumar, P. V., Veerasamy, V., & Radhakrishnan, P. (2022). A KNN based random subspace ensemble classifier for detection and discrimination of high impedance fault in PV integrated power network. Measurement, 187, 110333. [Google Scholar]
  24. Arun, V., Shukla, N. K., Singh, A. K., & Upadhyay, K. K. (2015, September). Design of all optical line selector based on SOA for data communication. In Proceedings of the Sixth International Conference on Computer and Communication Technology 2015 (pp. 281-285). [Google Scholar]
  25. Wani, Irfan Nazir, Ankur Kulshreshtha, and Saragadam Chaitanya. “Noise Reduction of Jet/Aircraft Engine Fitted with N10 Chevron Nozzle and Comparative Analysis with N8 Nozzle at Varied Tip Angle (β).” In International conference on Advances in Materials and Manufacturing, (2022): 331-340. Singapore: Springer Nature Singapore,. [Google Scholar]
  26. Mehdi, Husain, Sipokazi Mabuwa, Velaphi Msomi, and Kuldeep Kumar Saxena. “Influence of friction stir processing on the mechanical and microstructure characterization of single and double V-groove tungsten inert gas welded dissimilar aluminum joints.” Journal of Materials Engineering and Performance 32, 17 (2023): 7858-7868. [Google Scholar]
  27. Manohar, T., Prashantha, S. C., Nagaswarupa, H. P., Naik, R., Nagabhushana, H., Anantharaju, K. S., ... & Premkumar, H. B. (2017). White light emitting lanthanum aluminate nanophosphor: near ultra violet excited photoluminescence and photometric characteristics. Journal of Luminescence, 190, 279-288. [Google Scholar]
  28. Yelamasetti, Balram, P. Naveen Kumar, Venkat Ramana G, Kuldeep Kumar Saxena, Devender Singh, Amardeep Singh Kang, and Kahtan A. Mohammed. “Wear and corrosion behaviour of multiple pass friction stir processing on aluminium alloy 6061 embedding with B4C particles.” Advances in Materials and Processing Technologies (2023): 1-10. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.