Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01076
Number of page(s) 8
DOI https://doi.org/10.1051/e3sconf/202450701076
Published online 29 March 2024
  1. Murathan, Eda Köse, and Gülten Manioğlu. “A simulation-based evaluation of using PCMs in buildings for energy efficiency under different climate conditions.” Journal of Energy Storage 75 (2024): 109738. [CrossRef] [Google Scholar]
  2. Pouran, Mahdi, Farivar Fazelpour, G. B. Gharehpetian, and Alireza Saraei. “The effect of phase change material application in double skin Façade on energy saving of residential buildings considering different climates: a case study.” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 46, no. 1 (2024): 209-227. [CrossRef] [Google Scholar]
  3. Swarna, K. S. V., Vinayagam, A., Ananth, M. B. J., Kumar, P. V., Veerasamy, V., & Radhakrishnan, P. (2022). A KNN based random subspace ensemble classifier for detection and discrimination of high impedance fault in PV integrated power network. Measurement, 187, 110333. [CrossRef] [Google Scholar]
  4. Sharma, Rahul Kumar, Ashish Kumar, and Dibakar Rakshit. “A phase change material (PCM) based novel retrofitting approach in the air conditioning system to reduce building energy demand.” Applied Thermal Engineering 238 (2024): 121872. [CrossRef] [Google Scholar]
  5. Mohammed, Hamad K., Saad A. Jafar, Jasim I. Humadi, Shankar Sehgal, Kuldeep K. Saxena, Ghassan H. Abdullah, Liqaa I. Saeed, Mohanad S. Salman, and Waqas S. Abdullah. “Investigation of carbon steel corrosion rate in different acidic environments.” Materials Today: Proceedings (2023). [Google Scholar]
  6. Manohar, T., Prashantha, S. C., Nagaswarupa, H. P., Naik, R., Nagabhushana, H., Anantharaju, K. S., ... & Premkumar, H. B. (2017). White light emitting lanthanum aluminate nanophosphor: near ultra violet excited photoluminescence and photometric characteristics. Journal of Luminescence, 190, 279-288. [CrossRef] [Google Scholar]
  7. Arumugam, Pappu, and Velraj Ramalingam. “Thermal comfort enhancement of office buildings located under warm and humid climate through phase change material and insulation coupled with natural ventilation.” Sustainable Energy Technologies and Assessments 63 (2024): 103657. [CrossRef] [Google Scholar]
  8. Ahmad, Abrar, and Shazim Ali Memon. “A novel method to evaluate phase change materials' impact on buildings' energy, economic, and environmental performance via controlled natural ventilation.” Applied Energy 353 (2024): 122033. [CrossRef] [Google Scholar]
  9. Ramesh, Balasubramanian, Essmat Showman, SA Muhammed Abraar, Kuldeep Kumar Saxena, Mohammed Y. Tharwan, Naif Alsaadi, Sharaf Al Sofyani, and Ammar H. Elsheikh. “Microstructure, mechanical characteristics, and wear performance of spark plasma sintered TiB2–Si3N4 as affected by B4N doping.” Materials 15, 20 (2022): 7096. [CrossRef] [PubMed] [Google Scholar]
  10. Terhan, Meryem, and Gamze Ilgar. “Investigation of used PCM-integrated into building exterior walls for energy savings and optimization of PCM melting temperatures.” Construction and Building Materials 369 (2023): 130601. [CrossRef] [Google Scholar]
  11. Ashwini, S., Prashantha, S. C., Naik, R., & Nagabhushana, H. (2019). Enhancement of luminescence intensity and spectroscopic analysis of Eu3+ activated and Li+ charge-compensated Bi2O3 nanophosphors for solid-state lighting. Journal of Rare Earths, 37(4), 356-364. [CrossRef] [Google Scholar]
  12. Al-Yasiri, Qudama, and Márta Szabó. “Experimental study of PCM-enhanced building envelope towards energy-saving and decarbonisation in a severe hot climate.” Energy and Buildings 279 (2023): 112680. [CrossRef] [Google Scholar]
  13. Dardouri, Sana, Ekrem Tunçbilek, Othmen Khaldi, Müslüm Arıcı, and Jalila Sghaier. “Optimizing PCM Integrated Wall and Roof for Energy Saving in Building under Various Climatic Conditions of Mediterranean Region.” Buildings 13, no. 3 (2023): 806. [CrossRef] [Google Scholar]
  14. Vishwanatha, H. M., Kuldeep K. Saxena,Alokesh Pramanik, and Ajit Behera. “Cryo treatment and corrosion studies of nickel-titanium shape-memory alloy.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023): 09544089231159250. [Google Scholar]
  15. Kumar, C. P., Raghu, M. S., Prathibha, B. S., Prashanth, M. K., Kanthimathi, G., Kumar, K. Y., ... & Alharthi, F. A. (2021). Discovery of a novel series of substituted quinolines acting as anticancer agents and selective EGFR blocker: Molecular docking study. Bioorganic & Medicinal Chemistry Letters, 44, 128118. [CrossRef] [PubMed] [Google Scholar]
  16. Zhan, Haoxiang, Norhayati Mahyuddin, Raha Sulaiman, and Fazel Khayatian. “Phase change material (PCM) integrations into buildings in hot climates with simulation access for energy performance and thermal comfort: A review.” Construction and Building Materials 397 (2023): 132312. [CrossRef] [Google Scholar]
  17. Tamer, Tolga, Ipek Gürsel Dino, Derek K. Baker, and Cagla Meral Akgül. “Coupling PCM wallboard utilization with night Ventilation: Energy efficiency and overheating risk in office buildings under climate change impact.” Energy and Buildings 298 (2023): 113482. [CrossRef] [Google Scholar]
  18. Kitagawa, Haruka, Takashi Asawa, Maria Alejandra Del Rio, Tetsu Kubota, and Andhang Rakhmat Trihamdani. “Thermal energy simulation of PCM-based radiant floor cooling systems for naturally ventilated buildings in a hot and humid climate.” Building and Environment 238 (2023): 110351. [CrossRef] [Google Scholar]
  19. Laasri, Imad Ait, Abdelkader Outzourhit, and Mohamed Oualid Mghazli. “Multi-parameter analysis of different building forms in a semi-arid climate: Effect of building construction and phase change materials.” Solar Energy 250 (2023): 220-240. [CrossRef] [Google Scholar]
  20. Srinivasan, K., Porkumaran, K., & Sainarayanan, G. (2009, August). Improved background subtraction techniques for security in video applications. In 2009 3rd International Conference on Anti-counterfeiting, Security, and Identification in Communication (pp. 114-117). IEEE. [Google Scholar]
  21. Faheem, Abdul, Ankit Tyagi, Faisal Hasan, Abid Ali Khan, Qasim Murtaza, and Kuldeep K. Saxena. “Residual stress investigation in the metallic coating approach of micro-sized particles on the substrate: cold spray additive manufacturing.” Advances in Materials and Processing Technologies 8, 4 (2022): 4642-4658. [CrossRef] [Google Scholar]
  22. Devi, M. Dharani, A. Vimala Juliet, K. Hariprasad, V. Ganesh, H. Elhosiny Ali, H. Algarni, and I. S. Yahia. “Improved UV Photodetection of Terbium-doped NiO thin films prepared by cost-effective nebulizer spray technique.” Materials Science in Semiconductor Processing 127 (2021): 105673. [CrossRef] [Google Scholar]
  23. Pandya, D. J., Pandian, P. M., Kumar, I., Parmar, A., Singh, N., Abd Al-saheb, A. J., & Arun, V. (2023). Supercapacitors: Review of materials and fabrication methods. Materials Today: Proceedings. [Google Scholar]
  24. Kota, Venkata Reddy, and Muralidhar Nayak Bhukya. “A novel global MPP tracking scheme based on shading pattern identification using artificial neural networks for photovoltaic power generation during partial shaded condition.” IET Renewable Power Generation 13, 10 (2019): 1647-1659. [CrossRef] [Google Scholar]
  25. Patel, Arvind Kumar, S. P. S. Rajput, Rajan Kumar, Abhishek Sharma, Kuldeep K. Saxena, Manoj Kumar Agrawal, and Iman Kareem Kadhim. “Experimental and numerical investigation of metal oxide base nano particles for VCRS test rig.” International Journal on Interactive Design and Manufacturing (IJIDeM) (2023): 1-8. [Google Scholar]
  26. Refahi, Amirhossein, Abolfazl Rostami, and Mohammad Amani. “Implementation of a double layer of PCM integrated into the building exterior walls for reducing annual energy consumption: Effect of PCM wallboards position.” Journal of Energy Storage 82 (2024): 110556. [CrossRef] [Google Scholar]
  27. Awasthi, A., Saxena, K. K., & Arun, V. (2021). Sustainable and smart metal forming manufacturing process. Materials Today: Proceedings, 44, 2069-2079. [CrossRef] [Google Scholar]
  28. Mehrpour, Yalda, Amirhossein Balali, Alireza Valipour, Akilu Yunusa-Kaltungo, and Seyed Amir Shamsnia. “Envelope design optimisation for residential net zero energy buildings within cold and semi-arid climate: A case study of Shiraz.” Energy for Sustainable Development 78 (2024): 101352. [CrossRef] [Google Scholar]
  29. Marichelvam, M. K., C. Labesh Kumar, K. Kandakodeeswaran, B. Thangagiri, Kuldeep K. Saxena, Kamal Kishore, Naresh Kumar Wagri, and Sanjeev Kumar. “Investigation on mechanical properties of novel natural fiber-epoxy resin hybrid composites for engineering structural applications.” Case Studies in Construction Materials 19 (2023): e02356. [CrossRef] [Google Scholar]
  30. Zheng, Xinrui, Yan Liang, Haibin Yang, Yingyan Zeng, and Hongzhi Cui. “Collaborative Optimized Design of Glazing Parameters and PCM Utilization for Energy-Efficient Glass Curtain Wall Buildings.” Buildings 14, 1 (2024): 256. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.