EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 511 (2024) E3S Web Conf., 511 (2024) 01008 References
Open Access
Issue
E3S Web Conf.
Volume 511, 2024
International Conference on “Advanced Materials for Green Chemistry and Sustainable Environment” (AMGSE-2024)
Article Number 01008
Number of page(s) 13
DOI https://doi.org/10.1051/e3sconf/202451101008
Published online 10 April 2024
  1. S. Chakraborty, U. Sarkar, D. Bera, C. K. Ghosh, and L. Roy, Reference Module in Materials Science and Materials Engineering (2023) [Google Scholar]
  2. S. C. Carroccio, P. Scarfato, E. Bruno, P. Aprea, N. T. Dintcheva, and G. Filippone, J Clean Prod 335, (2022) [Google Scholar]
  3. E. Champa-Bujaico, A. M. Díez-Pascual, A. Lomas Redondo, and P. Garcia-Diaz, Compos B Eng 269, (2024) [Google Scholar]
  4. P. C. Nath, R. Sharma, S. Debnath, M. Sharma, B. S. Inbaraj, P. K. Dikkala, P. K. Nayak, and K. Sridhar, Int J Biol Macromol 253, (2023) [Google Scholar]
  5. A. H. Anwer, A. Ahtesham, M. Shoeb, F. Mashkoor, M. Z. Ansari, S. Zhu, and C. Jeong, Adv Colloid Interface Sci 318, (2023) [Google Scholar]
  6. J. Paul, J. Jacob, M. Mahmud, M. Vaka, S. G. Krishnan, A. Arifutzzaman, D. Thesiya, T. Xiong, K. Kadirgama, and J. Selvaraj, Int J Biol Macromol 130850 (2024) [CrossRef] [PubMed] [Google Scholar]
  7. D. S. Aditya, K. N. Mahadevaprasad, and S. K. Nataraj, Reference Module in Materials Science and Materials Engineering (2024) [Google Scholar]
  8. T. K. Das, M. Jesionek, Y. Çelik, and A. Poater, Science of the Total Environment 901, (2023) [Google Scholar]
  9. B. Ranjbar, S. Foroughirad, and Z. Ranjbar, Polymer Nanocomposite Films and Coatings 1 (2024) [Google Scholar]
  10. V. Dananjaya, S. Marimuthu, R. Yang, A. N. Grace, and C. Abeykoon, Prog Mater Sci 101282 (2024) [CrossRef] [Google Scholar]
  11. A. Sarker, S. C. Mondal, R. Ahmmed, J. Rana, M. Waheda Rahman Ansary, and M. Bilal, Smart Polymer Nanocomposites: Design, Synthesis, Functionalization, Properties, and Applications 355 (2022) [Google Scholar]
  12. I. Colijn, H. M. van der Kooij, and K. Schroën, Adv Colloid Interface Sci 324, (2024) [Google Scholar]
  13. S. R. Yashas, B. Shahmoradi, K. Wantala, and H. P. Shivaraju, Polymer (Guildf) 233, (2021) [Google Scholar]
  14. B. V. S. Praveen, R. K. Verma, A. N. Uttaravalli, B. R. G., and S. N. Sakhamudi, Polymer Nanocomposite Films and Coatings 219 (2024) [CrossRef] [Google Scholar]
  15. H. D. Huang, P. G. Ren, G. J. Zhong, A. Olah, Z. M. Li, E. Baer, and L. Zhu, Prog Polym Sci 144, (2023) [Google Scholar]
  16. S. Kirar, D. Mohne, M. Singh, V. Sagar, A. Bhise, S. Goswami, and J. Bhaumik, Sustainable Materials and Technologies e00864 (2024) [CrossRef] [Google Scholar]
  17. C.-F. Cao, G.-T. Zhu, and L.-C. Tang, Flame Retardant Nanocomposites 159 (2024) [CrossRef] [Google Scholar]
  18. S. Siddiqui, S. Surananai, K. Sainath, M. Zubair Khan, R. Raja Pandiyan Kuppusamy, and Y. Kempaiah Suneetha, Eur Polym J 196, (2023) [Google Scholar]
  19. N. Kumari, C. Mohan, A. Negi, “An Investigative Study on the Thermal and Mechanical Properties of Clay PVC Polymer Composite Films” MDPIPolymers, vol. 15, 2023, pp 1922, doi : 10.3390/polym15081922 [Google Scholar]
  20. A. Chandrashekar, M. Hegde, S. Krishna, J. Ayippadath Gopi, T. M. Kotresh, and T. N. Prabhu, Eur Polym J 198, (2023) [Google Scholar]
  21. M. B. Coltelli, P. Morganti, and A. Lazzeri, Biodegradable and Biocompatible Polymer Nanocomposites: Processing, Characterization, and Applications 699 (2023) [CrossRef] [Google Scholar]
  22. T. H. Thang and T. A. Nguyen, Smart Polymer Nanocomposites: Design, Synthesis, Functionalization, Properties, and Applications 333 (2022) [Google Scholar]
  23. H. Zhu, J. H. Cheng, and Z. Han, Int J Biol Macromol 256, (2024) [Google Scholar]
  24. R. El-Sheikhy, A. Al-Khuraif, and M. Al-Shamrani, Vacuum 217, (2023) [Google Scholar]
  25. B. Hazarika, M. Ahmaruzzaman, M. S. Santosh, D. Barceló, and S. Rtimi, J Environ Chem Eng 11, (2023) [Google Scholar]
  26. C. Mohan, N. Kumari, “Effect of various types of naturally occurring clay minerals on mechanical and thermal properties of PMMA polymer composite films” MRS Advances, vol. 7, 2022, pp 933–938, doi : 10.1557/s43580-022-00347-7 [CrossRef] [Google Scholar]
  27. A. Kumar, N. Mathur, V. S. Rana, H. Sood, and M. Nandal, Mater Today Proc (2022) [Google Scholar]
  28. M. Nandal, H. Sood, P. K. Gupta, and M. Z. U. Haq, Mater Today Proc (2022) [Google Scholar]
  29. V. S. Rana, M. Z. ul haq, N. Mathur, G. S. Khera, S. Dixit, S. Singh, A. Prakash, G. V. Viktorovna, O. V Soloveva, and S. A. Solovev, International Journal on Interactive Design and Manufacturing (IJIDeM) 1 (2023) [Google Scholar]
  30. H. Sood, R. Kumar, P. C. Jena, and S. K. Joshi, Mater Today Proc (2023) [Google Scholar]
  31. H. Sood, R. Kumar, P. C. Jena, and S. K. Joshi, Mater Today Proc (2023) [Google Scholar]
  32. K. Kumar, S. Dixit, A. Prakash, N. I. Vatin, M. Z. ul Haq, S. K. Tummala, P. B. Bobba, R. Sobti, and K. Kalpana, in E3S Web of Conferences (EDP Sciences, 2023), p. 01196 [CrossRef] [EDP Sciences] [Google Scholar]
  33. K. Kumar, S. Dixit, M. Z. ul Haq, V. K. Maksudovna, S. K. Tummala, P. B. Bobba, S. Chhabra, and D. Khatua, in E3S Web of Conferences (EDP Sciences, 2023), p. 01197 [CrossRef] [EDP Sciences] [Google Scholar]
  34. K. Kumar, S. Dixit, M. Z. ul Haq, V. K. Maksudovna, N. I. Vatin, D. S. N. M. Rao, V. K. Awaar, M. G. Nijhawan, and K. S. Rani, in E3S Web of Conferences (EDP Sciences, 2023), p. 01199 [CrossRef] [EDP Sciences] [Google Scholar]
  35. K. Kumar, S. Dixit, M. Z. ul Haq, V. K. Maksudovna, N. I. Vatin, M. Rekha, V. K. Awaar, A. Singla, and S. Jhade, in E3S Web of Conferences (EDP Sciences, 2023), p. 01200 [Google Scholar]
  36. M. Z. ul Haq, H. Sood, R. Kumar, S. K. Joshi, V. M. Reddy, M. Gupta, P. Samyuktha, and K. Kumar, in E3S Web of Conferences (EDP Sciences, 2023), p. 01203 [CrossRef] [EDP Sciences] [Google Scholar]
  37. C. Mohan, N. Kumari, Sushma, A. Yadav, V. K. Garg, “Introduction to environmental and green chemistry”, Elsevier Publishing, 2024, pp 1–22, doi : 10.1016/B978-0-443-18959-3.00005-7 [Google Scholar]
  38. M. Z. ul Haq, H. Sood, R. Kumar, V. Sharma, A. Kumar, T. Srinivas, M. Gulati, K. H. Bindu, and K. Kumar, in E3S Web of Conferences (EDP Sciences, 2023), p. 01201 [CrossRef] [EDP Sciences] [Google Scholar]
  39. M. Z. ul Haq, H. Sood, R. Kumar, S. Dixit, T. Srinivas, S. Ahuja, B. Lingam, and K. Kumar, in E3S Web of Conferences (EDP Sciences, 2023), p. 01202 [CrossRef] [EDP Sciences] [Google Scholar]
  40. M. Z. ul Haq, H. Sood, R. Kumar, P. Chaudhary, C. Lavanya, N. Dhaliwal, S. Singarapu, and K. Kumar, in E3S Web of Conferences (EDP Sciences, 2023), p. 01205 [CrossRef] [EDP Sciences] [Google Scholar]
  41. K. Kumar, S. Dixit, M. Z. ul Haq, A. Stefanska, S. K. Tummala, P. B. Bobba, N. Kaur, and M. A. Mohiuddin, in E3S Web of Conferences (EDP Sciences, 2023), p. 01198 [CrossRef] [EDP Sciences] [Google Scholar]
  42. M. Z. U. Haq, H. Sood, R. Kumar, and I. Merta, Case Studies in Construction Materials 20, (2024) [Google Scholar]
  43. M. Z. U. Haq, H. Sood, R. Kumar, and L. Ricciotti, J Mater Sci 59, 3858 (2024) [CrossRef] [Google Scholar]
  44. Md.Z. U. Haq, H. Sood, R. Kumar, and I. Merta, Case Studies in Construction Materials 20, e02780 (2024) [CrossRef] [Google Scholar]
  45. G. Upadhyay, K. K. Saxena, S. Sehgal, K. A. Mohammed, C. Prakash, S. Dixit, and D. Buddhi, Metals (Basel) 12, (2022) [Google Scholar]
  46. P. Singh, A. Adebanjo, N. Shafiq, S. N. A. Razak, V. Kumar, S. A. Farhan, I. Adebanjo, A. Singh, S. Dixit, S. Singh, and M. T. Sergeevna, International Journal on Interactive Design and Manufacturing (2023) [Google Scholar]
  47. M. Makwana, A. M. Patel, A. D. Oza, C. Prakash, L. R. Gupta, N. I. Vatin, and S. Dixit, Materials 15, (2022) [Google Scholar]
  48. Y. Kaushik, V. Verma, K. K. Saxena, C. Prakash, L. R. Gupta, and S. Dixit, Sustainability (Switzerland) 14, (2022) [Google Scholar]
  49. L. Das, R. Nayak, K. K. Saxena, J. Nanda, S. P. Jena, A. Behera, S. Sehgal, C. Prakash, S. Dixit, and D. S. Abdul-Zahra, Materials 15, (2022) [Google Scholar]
  50. Y. Kuppusamy, R. Jayaseelan, G. Pandulu, V. S. Kumar, G. Murali, S. Dixit, and N. I. Vatin, Materials 15, (2022) [Google Scholar]
  51. K. Zheng Yang, A. Pramanik, A. K. Basak, Y. Dong, C. Prakash, S. Shankar, S. Dixit, K. Kumar, and N. Ivanovich Vatin, Ain Shams Engineering Journal (2022) [Google Scholar]
  52. K. Kumar, S. Dixit, R. Arora, N. I. Vatin, J. Singh, O. V. Soloveva, S. B. Ilyashenko, V. John, and D. Buddhi, Materials 15, (2022) [Google Scholar]
  53. S. K. Samal, H. M. Vishwanatha, K. K. Saxena, A. Behera, T. A. Nguyen, A. Behera, C. Prakash, S. Dixit, and K. A. Mohammed, Crystals (Basel) 12, (2022) [Google Scholar]
  54. H. Bindu Katikala, T. Pavan Kumar, B. Manideep Reddy, B. V.V. Pavan Kumar, G. Ramana Murthy, and S. Dixit, Mater Today Proc 69, 576 (2022) [CrossRef] [Google Scholar]
  55. S. Dixit and A. Stefańska, Ain Shams Engineering Journal (2022) [Google Scholar]
  56. M. Kumar, C. Mohan, S. Kumar, K. Epifantsev, V. Singh, S. Dixit, and R. Singh, MRS Adv 7, 939 (2022) [CrossRef] [Google Scholar]
  57. H. D. Nguyen, A. Pramanik, A. K. Basak, Y. Dong, C. Prakash, S. Debnath, S. Shankar, I. S. Jawahir, S. Dixit, and D. Buddhi, Journal of Materials Research and Technology 18, 4641 (2022) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.