Open Access
| Issue |
E3S Web of Conf.
Volume 517, 2024
The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023)
|
|
|---|---|---|
| Article Number | 05022 | |
| Number of page(s) | 6 | |
| Section | Sustainable Development | |
| DOI | https://doi.org/10.1051/e3sconf/202451705022 | |
| Published online | 15 April 2024 | |
- T. Spahiu, H. Almeida, A. Manavis, and P. Kyratsis, AJOME, Fashion products through digital manufacturing – A case study with FDM technology, 18, 63–72, (2020) [Google Scholar]
- I. Roohani, A. Entezari, and H. Zreiqat, CD, Liquid crystal display technique (LCD) for high resolution 3D printing of triply periodic minimal surface lattices bioceramics, 74, (2023) [Google Scholar]
- Y. Li, M. Wang, H. Wu, F. He, Y. Chen, and S. Wu, CI, Cure behavior of colorful ZrO2 suspensions during Digital light processing (DLP) based stereolithography process, 39, 4921–4927, (2019) [Google Scholar]
- H. Quan, T. Zhang, H. Xu, S. Luo, J. Nie, and X. Zhu, BM, Photo-curing 3D printing technique and its challenges, 5, 110–115, (2020) [Google Scholar]
- H. Chen, D. H. Cheng, S. C. Huang, and Y. M. Lin, J Prosthet Dent, Comparison of flexural properties and cytotoxicity of interim materials printed from mono-LCD and DLP 3D printers, 126, 703–708, (2021) [Google Scholar]
- C. Chang and S. Ko, JOTKCS, Comparative Study on the 3D Printing Methodology suitable for Jewelry, 11, 225–230, (2020) [Google Scholar]
- L. Wang et al., AM, Accelerated refilling speed in rapid stereolithography based on nano-textured functional release film, 29, (2019) [Google Scholar]
- Y. Li, Q. Mao, J. Yin, Y. Wang, J. Fu, and Y. Huang, AM, Theoretical prediction and experimental validation of the digital light processing (DLP) working curve for photocurable materials, 37, (2020) [Google Scholar]
- T. Finnes and T. Letcher, TJOUR, High Definition 3D Printing-Comparing SLA and FDM Printing Technologies, 13, (2015) [Google Scholar]
- A. Malas, D. Isakov, K. Couling, G. J. Gibbons, MDPI, Fabrication of High Permittivity Resin Composite for Vat Photopolymerization 3D Printing: Morphology, Thermal, Dynamic Mechanical and Dielectric Properties, 12, (2019) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.