Open Access
Issue
E3S Web of Conf.
Volume 517, 2024
The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023)
Article Number 05023
Number of page(s) 12
Section Sustainable Development
DOI https://doi.org/10.1051/e3sconf/202451705023
Published online 15 April 2024
  1. R. Crotty, 5. The impact of building information modelling: transforming construction 1 edn, (2012) [Google Scholar]
  2. E. K. Kermanshahi, M. B. M. Tahir, N. H. A. S. Lim, A. T. Balasbaneh, S. Roshanghalb, IOP Con. Ser: Earth and Environmental Sci, Implementation of Building Information Modelling for C3onstruction Clash Detection Process in the Design Stage: A Case Study of Malaysian Police Headquarter Building, (2020) [Google Scholar]
  3. I. D. Tommelein, S. Gholami, Root Causes Of Clashes In Building Information Models, (2012) [Google Scholar]
  4. D. Migilinskas, V. Popov, V. Juocevicius, L. Ustinovichius, Proc. Eng., The Benefits, Obstacles and Problems of Practical BIM Implementation, (2013) [Google Scholar]
  5. L. Tang, C. Chen, S. Tang, Z. Wu, P. Trofimova, Enc. of Sus. Tech., Building Information Modelling and Building Performance Optimization, 311–320, (2017) [Google Scholar]
  6. Y. Y. Al-Ashmori et al., BIM benefits and its influence on the BIM implementation in Malaysia, 11, 1013–1019, (2020) [Google Scholar]
  7. X.J. Li, W.J. Xie, L.L.Li, C.Y. Jim, T.B. Wei, Energy and Buildings, Holistic life-cycle accounting of carbon emissions of prefabricated buildings using LCA and BIM, 266, (2022) [Google Scholar]
  8. M. najjar, K. Figueiredo, M. Palumbo, A. Haddad, Building Eng., Integration of BIM and LCA: Evaluating the environmental impacts of building materials at an early stage of designing a typical office building, 266, (2017) [Google Scholar]
  9. R. Jin, B. Zhong, L. Ma, A. Hashemi, L. Ding., Automation in Construction, Integrating BIM with building performance analysis in project life-cycle, 106, (2019) [Google Scholar]
  10. A. S. Hadi, A. M. Abd, M. Mahmood, IOP Conf Ser. Mater Sci. Eng., Integrity of Revit with structural analysis softwares, 1076, 1, (2019) [Google Scholar]
  11. G. Gegana, T. H. Widjinarso, 9th BIM Academic Symposium & Job Task Analysis Review, BIM Course Development and Its Future Integration At University Of Indonesia and Institute Of Technology Bandung Indonesia, (2015) [Google Scholar]
  12. S. E. Naveen, N. M. Abraham, A. S. D. Kumari, Procedia Structural Integrity, Analysis of irregular structures under earthquake loads, 806–819, (2019) [Google Scholar]
  13. S. Bhomaj, P. Ghodake, and J. P. Patankar, Eng. and Tech., Analysis and Design of Regular and Irregular Buildings, (2019) [Google Scholar]
  14. H. Gokdemir, H. Ozbasaran, M. Dogan, E. Unluoglu, U. Albayrak, Eng Fail Anal, Effects of torsional irregularity to structures during earthquakes, 35, 713–717, (2013) [Google Scholar]
  15. R. Sulistian, J. Sjah, A.D. Rasarati, J.J. Oetomo, Sci. and Eng. Investigations, A Study of BIM Modelling in Seismic Analysis according to SNI 1726:2019, 11, (2022) [Google Scholar]
  16. C. L. Wu, K. C. Wang, W. C. Wang, A BIM-based Conceptual Cost Estimation Model Considering Structural Analysis and Design, 278–285, (2018) [Google Scholar]
  17. P. Chandrakar and P. S. Bokare, IJSR, A Review-Comparison between Response Spectrum Method and Time History Method for Dynamic Analysis of Multistoried Building, (2015) [Google Scholar]
  18. M. Sherif Mehana, O. Mohamed, F. Isam, IOP Conf Ser. Mater Sci. Eng., Torsional Behaviour of Irregular Buildings with Single Eccentricity, (2019) [Google Scholar]
  19. A. Setiawan, Perancangan Struktur Beton Bertulang (Berdasarkan SNI 2847:2013) ed. 1, 1, (2016) [Google Scholar]
  20. H. A.Malek, T. K. Hassan, and A. Moustafa, ASEJ, Nonlinear time history analysis evaluation of optimized design for medium to high rise buildings using performance-based design, (2022) [Google Scholar]
  21. L.T. Guevara, J.L. Alonso, E. Fortoul, Earthquake Engineering, Floor-plan Shape Influence on the Response of Earthquakes, (1992) [Google Scholar]
  22. M. Dobelis, The 12 th International Conference on Engineering Graphics BALTGRAF, Drawbacks of BIM Concept Adoption, (2013) [Google Scholar]
  23. American Society of Civil Engineers, Minimum Design Loads and Associated Criteria for Buildings and Other Structures, (2017) [Google Scholar]
  24. American Concrete Institute, Building code requirements for structural concrete (ACI 318M14): An ACI Standard: Commentary on building code requirements for structural concrete (ACI 318M-14). (2015) [Google Scholar]
  25. Badan Standarisasi Nasional, SNI 1726:2019 Tata Cara Perencanaan Ketahanan Gempa untuk Bangunan Gedung dan Non Gedung, (2019) [Google Scholar]
  26. Badan Standarisasi Nasional, SNI 2847:2019 Persyaratan Beton Struktural untuk Bangunan Gedung, (2019) [Google Scholar]
  27. Badan Standarisasi Nasional, SNI 1727:2020 Peraturan Beban Minimum untuk Perencanaan Bangunan Gedung dan Struktur lain, (2013) [Google Scholar]
  28. F. Naeim, SP, The Seismic Design Handbook, (2001) [Google Scholar]
  29. R. Park, T. Paulay, WOL, Reinforced Concrete Structures. (1975) [Google Scholar]
  30. J. K. Wight, P, Reinforced Concrete: Mechanics and Design (Seventh edition), (2016) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.