EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 517 (2024) E3S Web of Conf., 517 (2024) 08002 References
Open Access
Issue
E3S Web of Conf.
Volume 517, 2024
The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023)
Article Number 08002
Number of page(s) 6
Section Chemical Engineering
DOI https://doi.org/10.1051/e3sconf/202451708002
Published online 15 April 2024
  1. N. Saba and M. Jawaid, Epoxy resin based hybrid polymer composites. Elsevier Ltd, 2017. [Google Scholar]
  2. E. Budiyati, T. A. Sucipto, and R. N. Hidayati, “Composite of the teak wood sawdust and banana stem fiber,” AIP Conf. Proc., 2370, pp. 1–7, 2021, doi: 10.1063/5.0062489. [Google Scholar]
  3. Mujiyono et al., “Damage Formations of Ramie Fiber Composites Multilayer Armour System Under Highvelocity Impacts,” Eastern-European J. Enterp. Technol., 1, no. 12(121), pp. 16–25, 2023, doi: 10.15587/1729-4061.2023.273788. [CrossRef] [Google Scholar]
  4. R. Siakeng, M. Jawaid, H. Ariffin, and S. M. Sapuan, “Mechanical, dynamic, and thermomechanical properties of coir/pineapple leaf fiber reinforced polylactic acid hybrid biocomposites,” Polym. Compos., 40, no. 5, pp. 2000–2011, 2019, doi: 10.1002/pc.24978. [CrossRef] [Google Scholar]
  5. M. Khayati, M. Indarto, F. W. K. Wardana, and T. Widayatno, “Analisa Pengaruh Konsentrasi Limbah Serat Aren dan Limbah Kertas dalam Pembuatan Papan Komposit terhadap Modulus Rupture,” J. Rekayasa Mesin, 11, no. 3, pp. 461–466, 2020, doi: 10.21776/ub.jrm.2020.011.03.18. [CrossRef] [Google Scholar]
  6. S. Riyadi, Z. Abidin, T. Setiawan, and B. A. Adnan, “The application of young coconut waste processing technology to the women farmer group in Kertasari, Ciamis Regency, West Java,” Galuh Int. J. Community Serv. Dev., 1, no. 1, pp. 1–7, 2023. [Google Scholar]
  7. A. Maulana, Udiantoro, and L. Agustina, “Utilization of Coconut Fiber Waste ( Cocos nucifera L) and Empty Palm Oil Bunch Fibers (Elais guineensis Jacq) as a Combination of Raw Material for Making Particle Board,” ZIRAA’AH, 44, pp. 106–114, 2019. [Google Scholar]
  8. L. Hakim, R. Widyorini, W. D. Nugroho, and T. Prayitno, “Anatomical, chemical, and mechanical properties of fibrovascular bundles of Salacca (Snake Fruit) frond,” BioResources, 14, no. 4, pp. 7943–7957, 2019, doi: 10.15376/biores.14.4.7943-7957. [CrossRef] [Google Scholar]
  9. V. Yudha, H. S. B. Rochardjo, J. Jamasri, R. Widyorini, F. Yudhanto, and S. Darmanto, “Isolation of cellulose from salacca midrib fibers by chemical treatments,” IOP Conf. Ser. Mater. Sci. Eng., 434, no. 1, 2018, doi: 10.1088/1757-899X/434/1/012078. [CrossRef] [Google Scholar]
  10. R. D. Ismawanti, W. D. R. Putri, E. S. Murtini, and H. Purwoto, “Edible Film Made of Corn Starch-Carrageenan-Rice Bran: The Characteristic of Formula’s Viscosity, Water Content, and Water Vapor Transmission Rate,” Ind. J. Teknol. dan Manaj. Agroindustri, 9, no. 3, pp. 173–183, 2020, doi: 10.21776/ub.industria.2020.009.03.2. [CrossRef] [Google Scholar]
  11. P. Fibers, “JoTP,” 4, no. 1, pp. 1–9, 2022. [CrossRef] [Google Scholar]
  12. P. Deng, Y. Shi, Y. Liu, Y. Liu, and Q. Wang, “Solidifying process and flame retardancy of epoxy resin cured with boron-containing phenolic resin,” Appl. Surf. Sci., 427, pp. 894–904, 2018, doi: 10.1016/j.apsusc.2017.07.278. [CrossRef] [Google Scholar]
  13. B. Aaliyah, K. V. Sunooj, and M. Lackner, “Biopolymer composites: a review,” Int. J. Biobased Plast., 3, no. 1, pp. 40–84, 2021, doi: 10.1080/24759651.2021.1881214. [CrossRef] [Google Scholar]
  14. M. Arsyad, Y. Kondo, Arman, A. M. Anzarih, and N. Wahyuni, “Effect of sodium hydroxide concentration on the tensile strength of coconut fiber,” J. Phys. Conf. Ser., 1341, no. 5, 2019, doi: 10.1088/1742-6596/1341/5/052001. [Google Scholar]
  15. M. G. Aruan Efendy and K. L. Pickering, “Comparison of strength and Young modulus of aligned discontinuous fiber PLA composites obtained experimentally and from theoretical prediction models,” Compos. Struct., 208, pp. 566–573, 2019, doi: 10.1016/j.compstruct.2018.10.057. [CrossRef] [Google Scholar]
  16. Fabiana Meijon Fadul, “済無No Title No Title No Title,” 9, no. December, pp. 1695–1704, 2019. [Google Scholar]
  17. M. Z. Hassan, S. M. Sapuan, S. A. Roslan, S. A. Aziz, and S. Sarip, “Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fiber reinforced epoxy composites using response surface methodology,” J. Mater. Res. Technol., 8, no. 4, pp. 3517–3528, 2019, doi: 10.1016/j.jmrt.2019.06.026. [CrossRef] [Google Scholar]
  18. E. V. Torres-Tello, J. R. Robledo-Ortíz, Y. González-García, A. A. Pérez-Fonseca, C. F. Jasso-Gastinel, and E. Mendizábal, “Effect of agave fiber content in the thermal and mechanical properties of green composites based on polyhydroxybutyrate or poly(hydroxybutyrate-co-hydroxyvalerate),” Ind. Crops Prod., 99, pp. 117–125, 2017, doi: 10.1016/j.indcrop.2017.01.035. [CrossRef] [Google Scholar]
  19. S. N. Kane, A. Mishra, and A. K. Dutta, “Preface: International Conference on Recent Trends in Physics (ICRTP 2016),” J. Phys. Conf. Ser., 755, no. 1, 2016, doi: 10.1088/1742-6596/755/1/011001. [Google Scholar]
  20. B. D. Richard, A. Wahi, R. Nani, E. Iling, S. Osman, and D. S. H. Ali, “Effect of fiber loading on mechanical properties of oil palm frond/urea formaldehyde (OPF/UF) composite,” Int. J. Integr. Eng., 11, no. 7, pp. 122–128, 2019, doi: 10.30880/ijie.2019.11.07.016. [CrossRef] [Google Scholar]
  21. N. Venkatachalam, P. Navaneethakrishnan, and T. P. Sathishkumar, “Characterization of novel Passiflora foetida natural fibers for paper board industry,” J. Ind. Text., 2016, pp. 1–24, 2016, doi: 10.1177/1528083716682923. [Google Scholar]
  22. S. K, S. R, S. P, and S. P, “Analytical and Experimental Investigation on Sisal Fibers Reinforced Polymer Composites in Aviation,” Int. J. Eng. Appl. Sci. Technol., 4, no. 1, pp. 94–97, 2019, doi: 10.33564/ijeast.2019.v04i01.016. [Google Scholar]
  23. W. J. Sun, S. Kothari, and C. C. Sun, “The relationship among tensile strength, Young’s modulus, and indentation hardness of pharmaceutical compacts,” Powder Technol., 331, pp. 1–6, 2018, doi: 10.1016/j.powtec.2018.02.051. [CrossRef] [Google Scholar]
  24. E. Mahdi, D. R. H. Ochoa, A. Vaziri, A. Dean, and M. Kucukvar, “Khalasa date palm leaf fiber as a potential reinforcement for polymeric composite materials,” Compos. Struct., 265, no. December 2020, p. 113501, 2021, doi 10.1016/j.compstruct.2020.113501. [CrossRef] [Google Scholar]
  25. A. Y. Potlov, S. G. Proskurin, and S. V. Frolov, “Young’s modulus evaluation for the blood vessel walls using intravascular optical coherence tomography,” 2020 8th E-Health Bioeng. Conf. EHB 2020, pp. 20–23, 2020, doi 10.1109/EHB50910.2020.09280242. [Google Scholar]
  26. S. V. Frolov and T. C. Jen, “Mechanical and water absorption behavior of potassium permanganate (KMnO4) treated plantain (Musa Paradisiacal) fiber/epoxy bio-composites,” J. Mater. Res. Technol., 9, no. 4, pp. 8705–8713, 2020, doi: 10.1016/j.jmrt.2020.05.121. [CrossRef] [Google Scholar]
  27. M. C. Biocomposites, “Mechanical Properties and Tribological Behavior of,” 2021. [Google Scholar]
  28. S. Gurusideswar, N. Srinivasan, R. Velmurugan, and N. K. Gupta, “Tensile Response of Epoxy and Glass/Epoxy Composites at Low and Medium Strain Rate Regimes,” Procedia Eng., 173, pp. 686–693, 2017, doi: 10.1016/j.proeng.2016.12.148. [CrossRef] [Google Scholar]
  29. S. A. Hallad et al., “Graphene Reinforced Natural Fiber Nanocomposites for Structural Applications,” IOP Conf. Ser. Mater. Sci. Eng., 376, no. 1, 2018, doi: 10.1088/1757-899X/376/1/012072. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.