EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 517 (2024) E3S Web of Conf., 517 (2024) 15004 References
Open Access
Issue
E3S Web of Conf.
Volume 517, 2024
The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023)
Article Number 15004
Number of page(s) 8
Section Safety on Sustainable Industries
DOI https://doi.org/10.1051/e3sconf/202451715004
Published online 15 April 2024
  1. S. P. Sari, P. Studi, T. Industri, F. Teknik, and U. M. Surakarta, “Penyusunan Hazard Identification Risk Assessment And Risk Control (HIRARC) (Studi Kasus : CV Karya Logam) Dengan Penyusunan Hazard Identification Risk Assessment And Risk Control (HIRARC) ( Studi Kasus : CV Karya Logam),” 2020. [Google Scholar]
  2. I. Pratiwi, M. T. Nughroho, and S. Khotimah, “Penerapan Metode Just-in-Time Dengan Pembakuan Kegiatan Dan Minimasi Waktu Set-Up Pada Bagian Permesinan Pembuatan Produk Gt 060,” J. Ilm. Tek. Ind., vol. 6, pp. 1–8, 2007. [Google Scholar]
  3. O. Z. Putri, T. M. A. B. R. Hussin, and H. S. Kasjono, “Analisis Risiko Keselamatan dan Kesehatan Kerja pada Petugas Kesehatan Instalasi Gawat Darurat Rumah Sakit Akademik UGM,” J. Kesehat., vol. 10, no. 2, p. 1, 2017, doi: 10.23917/jurkes.v10i2.5522. [Google Scholar]
  4. Solanda, “Job Safety Analysis (JSA) Sebagai Upaya Pengendalian Risiko Kecelakaan Kerja Pada Pekerjaan Pengecoran Logam di PT Aneka Adhilogam Karya Ceper Klaten,” no. June, 2016. [Google Scholar]
  5. M. Anik, “Analisis K3 dan Perancangan Ulang Tata Letak di Industri Pengecoran Logam Dengan Menggunakan Metode SLP (Systematic Layout Planning),” Angew. Chemie Int. Ed. 6(11), 951–952., 2017. [Google Scholar]
  6. S. R. R. Al Asyhar Wahyu Azady, Evi Widowati, “Penggunaan Job Hazard Analysis dalam Identifikasi Risiko Keselamatan Kerja pada,” Higeia J. Public Heal. Res. Dev., vol. 2, no. 4, pp. 510–519, 2018. [Google Scholar]
  7. I. Pratiwi, E. Muslimah, and A. W. Aqil, “Perancangan Tata Letak Fasilitas Di Insustri Tahu Menggunakan Blockplan,” J. Ilm. Tek. Ind. Univ. Muhamadiyah Surakarta, vol. 11, no. 2, pp. 102–112, 2015. [Google Scholar]
  8. M. Nur, “Analisis Kecelakaan Kerja dengan Menggunakan Metode Hazard and Operability Study (HAZOP) (Studi Kasus: PT. XYZ),” J. Tek. Ind. Terintegrasi, vol. 2, no. 2, pp. 30–37, 2019, doi: 10.31004/jutin.v2i2.480. [Google Scholar]
  9. M. N. al. Jaafar, Shoffian Amin; Amran, Suhaily; Maghpor, “Indoor Air Quality : Microbe and Its Relationship towards Temperature, Relative Humidity and Carbon Dioxide Concentration,” NIOSH J. OSH, vol. 12, no. 1, pp. 73–80, 2014. [Google Scholar]
  10. C. López-Botero and A. M. Ovalle-Castiblanco, “Degree of implementation of occupational Safety and health management systems (OSHMS), in the metalworking industries of the south-central region of Caldas – Colombia,” Ing. y Compet., vol. 18, no. 1, p. 91, 2016, doi: 10.25100/iyc.v18i1.2180. [Google Scholar]
  11. A. Surya, “Manajemen Risiko K3 Menggunakan Pendekatan JSA dan HIRARC Guna Meminimalisir Potensi HAZARD. Program Studi Teknik Industri,” 2018. [Google Scholar]
  12. D. S. Urrohmah and D. Riandadari, “Identifikasi Bahaya dengan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC) dalam Upaya Memperkecil Risiko Kecelakaan Kerja di PT. PAL Indonesia,” J. Pendidik. Tek. Mesin, vol. 8, no. 1, pp. 34–35, 2019. [Google Scholar]
  13. N. Gwezuva and S. Jerie, “Safety and Health Problems in the Small and Medium Scale Metal Fabrication Enterprises in Willowvale Industrial Area in Harare, Zimbabwe,” pp. 1–21, 2018, [Online]. Available: http://www.ajhssr.com/wp- content/uploads/cfdb7_uploads/1532968396-Jerie- Gwezuva-AJHSS.pdf [Google Scholar]
  14. B. Gulhan, M. Ilhan, and E. Civil, “Ankara’da bir metal sanayi fabrikasında iş kazaları ve etkileyen faktörler,” Türkiye Halk Sağlığı Derg., vol. 10, p. 76, Dec. 2015, doi: 10.20518/tjph.173067. [CrossRef] [Google Scholar]
  15. J. V. K. Sinaga, “Pengendalian Bahaya K3 Dengan Metode HIRARC Di Bengkel Las Putra Manunggal,” 2020, [Online]. Available: http://e-journal.uajy.ac.id/22584/%0Ahttp://e-journal.uajy.ac.id/22584/1/1406079441.pdf [Google Scholar]
  16. S. Ramli, Pedoman Praktis Manajemen Risiko dalam Perspektif K3 OHS Risk Management. Jakarta: Dian Agung, 2010. [Google Scholar]
  17. I. Pratiwi and V. S. Kalyana, “Ergonomic Risk Evaluation of Manual Material Handling in Brick Production,” J. Ilm. Tek. Ind., vol. 21, no. 1, pp. 113–124, 2022, doi: 10.23917/jiti.v21i1.17010. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.