Open Access
Issue
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
Article Number 01021
Number of page(s) 10
Section Materials
DOI https://doi.org/10.1051/e3sconf/202452901021
Published online 29 May 2024
  1. P. Kulkarni, V. Ravekar, P. Rama Rao, S. Waigokar, and S. Hingankar, “Recycling of waste HDPE and PP plastic in preparation of plastic brick and its mechanical properties,” Clean. Mater., vol. 5, no. July, p. 100113, 2022, doi: 10.1016/j.clema.2022.100113. [CrossRef] [Google Scholar]
  2. B. Sankar and P. Ramadoss, “Modeling Modelling the compressive strength of high-performance concrete containing metakaolin using distinctive statistical techniques,”Results Control Optim., vol. 12, no. May, p. 100241, 2023,doi: 10.1016/j.rico.2023.100241. [CrossRef] [Google Scholar]
  3. B. Sankar and P. Ramadoss, “Assessment of mechanical and durability performance of silica fume and metakaolin as cementitious materials in high-performance concrete,”Int. Rev. Appl. Sci. Eng., vol. 15, no. 1, pp. 44–54, 2024, doi: 10.1556/1848.2023.00638 [Google Scholar]
  4. G. K. Arunvivek and D. Rameshkumar, “Experimental Investigation on Performance of Waste Cement Sludge and Silica Fume-Incorporated Portland Cement Concrete,”J. Inst. Eng. Ser. A, vol. 100, no. 4, pp. 611–618, 2019,doi: 10.1007/s40030-019-00399-3. [CrossRef] [Google Scholar]
  5. P. Rama Rao and G. Ramakrishna, “Oil palm empty fruit bunch fiber: surface morphology, treatment, and suitability as reinforcement in cement composites- A state of the art review,” Clean. Mater., vol. 6, no. July, p. 100144, 2022, doi: 10.1016/j.clema.2022.100144. [CrossRef] [Google Scholar]
  6. B. Sankar and P. Ramadoss, “Review on fiber hybridization in ternary blended high-performance concrete,”Mater. Today Proc., vol. 45, pp. 4919–4924, 2021, doi: 10.1016/j.matpr.2021.01.366. [CrossRef] [Google Scholar]
  7. B. Sankar and P. Ramadoss, “Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete,”Int. J. Eng. Trans. B Appl., vol. 35, no. 8, pp. 1629–1640, 2022,doi: 10.5829/IJE.2022.35.08B.19 [Google Scholar]
  8. M. S. Ahmed, O. Kayali, and W. Anderson, “Evaluation of Binary and Ternary Blends of Pozzolanic Materials Using the Rapid Chloride Permeability Test,”J. Mater. Civ. Eng., vol. 21, no. 9, pp. 446–453, 2009, doi: 10.1061/(asce)0899-1561(2009)21:9(446). [CrossRef] [Google Scholar]
  9. S. H. Jung, Y. C. Choi, and S. Choi, “Use of ternary blended concrete to mitigate thermal cracking in massive concrete structures—A field feasibility and monitoring case study,” Constr. Build. Mater., vol.137, pp. 208–215, 2017,doi: 10.1016/j.conbuildmat.2017.01.108. [CrossRef] [Google Scholar]
  10. C. Prithiviraj, P. Swaminathan, D. R. Kumar, G. Murali, and N. I. Vatin, “Fresh and Hardened Properties of Self-Compacting Concrete Comprising a Copper Slag,” Buildings, vol. 12, no. 7, 2022, doi: 10.3390/buildings12070965. [CrossRef] [Google Scholar]
  11. H. M. Owaid, R. Hamid, and M. R. Taha, “Durability properties of multiple-blended binder concretes incorporating thermally activated alum sludge ash,” Constr. Build. Mater., vol. 200, pp. 591–603, 2019,doi: 10.1016/j.conbuildmat.2018.12.149. [CrossRef] [Google Scholar]
  12. K. Samimi, S. Kamali-Bernard, A. Akbar Maghsoudi, M. Maghsoudi, and H. Siad, “Influence of pumice and zeolite on compressive strength, transport properties and resistance to chloride penetration of high strength self-compacting concretes,” Constr. Build. Mater., vol. 151, pp. 292–311, 2017, doi: 10.1016/j.conbuildmat.2017.06.071. [CrossRef] [Google Scholar]
  13. P. Danish and G. Mohan Ganesh, “Durability properties of self-compacting concrete using different mineral powders additions in ternary blends,”Rev. Rom. Mater. Rom. J. Mater., vol. 50, no. 3, pp. 369–378, 2020 [Google Scholar]
  14. C. B. Cheah, J. S. Lim, and M. B. Ramli, “The mechanical strength and durability properties of ternary blended cementitious composites containing granite quarry dust (GQD) as natural sand replacement,”Constr. Build. Mater., vol. 197, pp. 291–306, 2019,doi: 10.1016/j.conbuildmat.2018.11.194. [CrossRef] [Google Scholar]
  15. S. Rukzon and P. Chindaprasirt, “Use of ternary blend of Portland cement and two pozzolans to improve durability of high-strength concrete,” KSCE J. Civ. Eng., vol.18, no. 6, pp. 1745–1752, 2014, doi: 10.1007/s12205-014-0461-y. [CrossRef] [Google Scholar]
  16. A. Joshaghani and M. A. Moeini, “Evaluating the effects of sugar cane bagasse ash (SCBA) and nanosilica on the mechanical and durability properties of mortar,” Constr. Build. Mater., vol. 152, pp. 818–831, 2017,doi: 10.1016/j.conbuildmat.2017.07.041. [CrossRef] [Google Scholar]
  17. A. R. Bagheri, H. Zanganeh, and M. M. Moalemi, “Mechanical and durability properties of ternary concretes containing silica fume and low reactivity blast furnace slag,”Cem. Concr. Compos., vol. 34, no. 5, pp. 663–670, 2012, doi: 10.1016/j.cemconcomp.2012.01.007. [CrossRef] [Google Scholar]
  18. Q. Tran and P. Ghosh, “Influence of pumice on mechanical properties and durability of high performance concrete,”Constr. Build. Mater., vol. 249, p. 118741, 2020, doi: 10.1016/j.conbuildmat.2020.118741. [CrossRef] [Google Scholar]
  19. W. Wongkeo, P. Thongsanitgarn, A. Ngamjarurojana, and A. Chaipanich, “Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume,”Mater. Des., vol. 64, pp. 261–269, 2014, doi: 10.1016/j.matdes.2014.07.042. [CrossRef] [Google Scholar]
  20. S. W. M. Supit, F. U. A. Shaikh, and P. K. Sarker, “Effect of ultrafine fly ash on mechanical properties of high volume fly ash mortar,”Constr. Build. Mater., vol. 51, pp. 278–286, 2014, doi: 10.1016/j.conbuildmat.2013.11.002. [CrossRef] [Google Scholar]
  21. A. Elahi, P. A. M. Basheer, S. V. Nanukuttan, and Q. U. Z. Khan, “Mechanical and durability properties of high performance concretes containing supplementary cementitious materials,” Constr. Build. Mater., vol. 24, no. 3, pp. 292–299, 2010, doi: 10.1016/j.conbuildmat.2009.08.045. [CrossRef] [Google Scholar]
  22. V. B. R. Suda and P. S. Rao, “Experimental investigation on optimum usage of Micro silica and GGBS for the strength characteristics of concrete,”Mater. Today Proc., vol. 27, pp. 805–811, 2020, doi: 10.1016/j.matpr.2019.12.354. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.