EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 529 (2024) E3S Web of Conf., 529 (2024) 01020 References
Open Access
Issue
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
Article Number 01020
Number of page(s) 10
Section Materials
DOI https://doi.org/10.1051/e3sconf/202452901020
Published online 29 May 2024
  1. R. Djamaluddin, M. A. Caroga, M. W. Tjaronge, A. T. Lando and R. Irmawaty, “Evaluation of sustainable pavingblocks incorporating processed waste tea ash”. Case Studies in Construction Materials. 12. doi: https://doi.org/10.1016/j.cscm.2019.e00325, 2020. [CrossRef] [Google Scholar]
  2. T. Kantai, “Confronting the Plastic Pollution Pandemic” International Institute for Sustainable Development. Available from https://www.iisd.org/articles/confronting-plastic-pollution-pandemic, 2020. [Google Scholar]
  3. O. A. Alabi, K. I. Ologbonjaye, O. Awosolu and O. E. Alade, “Public and Environmental Health Effects of Plastic Wastes Disposal: A Review”. Journal of Toxicology and Risk Assessment 5(021), (2019). https:\\www.doi.org/10.23937/2572-4061.1510021, 2019. [Google Scholar]
  4. R. Geyer, J. R. Jambeck and K. L. Law, “Production, use, and fate of all plastics ever made”. Science Advance. 3(7), (2017), e1700782. [Google Scholar]
  5. G. K. Arunvivek and D. Rameshkumar, “Experimental Investigation on Performance of Waste Cement Sludge and Silica Fume-Incorporated Portland Cement Concrete,” J. Inst. Eng. Ser. A, vol. 100, no. 4, pp. 611–618, 2019, doi: 10.1007/s40030-019-00399-3. [CrossRef] [Google Scholar]
  6. K. Arunkumar, M. Muthukannan, A. S. Kumar, A. C. Ganesh, and R. K. Devi, “Cleaner environment approach by the utilization of low calcium wood ash in geopolymer concrete,” Appl. Sci. Eng. Prog., vol. 15, no. 1, pp. 1–13, 2022, doi: 10.14416/j.asep.2021.06.005. [Google Scholar]
  7. B. Sankar and P. Ramadoss, “Modeling Modelling the compressive strength of high-performance concrete containing metakaolin using distinctive statistical techniques,” Results Control Optim., vol. 12, no. May, p. 100241, 2023, doi: 10.1016/j.rico.2023.100241. [CrossRef] [Google Scholar]
  8. K. Arunkumar, M. Muthukannan, A. Suresh kumar, and A. Chithambar Ganesh, “Mitigation of waste rubber tire and waste wood ash by the production of rubberized low calcium waste wood ash based geopolymer concrete and influence of waste rubber fibre in setting properties and mechanical behavior,” Environ. Res., vol. 194, no. December 2020, p. 110661, 2021, doi: 10.1016/j.envres.2020.110661. [CrossRef] [Google Scholar]
  9. G. K. Arunvivek and D. Rameshkumar, “Experimental Investigation on Feasibility of utilizing Phosphogypsum in E-Glass Fiber-incorporated Non-fired Ceramic Wall Tile,” J. Inst. Eng. Ser. A, vol. 103, no. 2, pp. 445–451, 2022, doi: 10.1007/s40030-021-00604-2. [CrossRef] [Google Scholar]
  10. B. Sankar and P. Ramadoss, “Assessment of mechanical and durability performance of silica fume and metakaolin as cementitious materials in high-performance concrete,” Int. Rev. Appl. Sci. Eng., vol. 15, no. 1, pp. 44–54, 2024, doi: 10.1556/1848.2023.00638. [Google Scholar]
  11. Leite, M.B.; Figueire do Filho, J.G.L.; Lima, P.R.L. Workability Study of Concretes Made with Recycled Mortar Aggregate. Mater. Struct. 2013, 46, 1765–1778. [CrossRef] [Google Scholar]
  12. S. F. Wong, Temasek Polytechnic, Singapore, “Use of Recycled Plastics in a Pavement System”, 35th Conference on Our World in Concrete & Structures: 25 – 27 August 2010. [Google Scholar]
  13. Kewal, Sanjay K. Sharma and Himmi Gupta, “Development of Paver Block by Using Foundry Sand Based Geopolymer Concrete”, Journal of Today’s Ideas – Tomorrow’s Technologies, Volume 03(No. 2), PP. 129–144, December 2015. [CrossRef] [Google Scholar]
  14. Nivetha C.,Rubiya M., Shobana S., Vaijayanthi R. G.Viswanthan M. E., and R.Vasanthi M. E. “Production of Plastic Waste Paver Block From The Solid Waste (Quarry Dust, Fly ash, Pet)”ARPN Journal Of Engineering And Applied Science, Volume11(No.2), January 2016. [Google Scholar]
  15. Dinesh S., Dinesh A. and Kirubakaran K. “Utilization of Waste Plastic in Manufacturing of Bricks and Paver Blocks”; International Journal of Applied Engineering Research ISSN 0973–4562, Volume 11(No.03), 2016. [Google Scholar]
  16. Shanmugavall and K. Gowtham, P. Jeba Nalwin and B. Eswara Moorthy. “Reuse of Plastic Waste in Paver Blocks”, International Journal of Engineering Research and Technology (IJERT) ISSN: 2278-0181, Volume 06(Issue 02), February 2016. [Google Scholar]
  17. R.Mahadevi, Abirami, P. Jananipriya, J.Karunya, and M. Sakthipriya. “An Experimental Investigation on Concrete Paver Block by Using PVC Plastic Material” International Journal of Modern Trends in Engineering and Research (IJMTER), Volume 05(Issue: 03), March 2018 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.