EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 529 (2024) E3S Web of Conf., 529 (2024) 01045 References
Open Access
Issue
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
Article Number 01045
Number of page(s) 11
Section Materials
DOI https://doi.org/10.1051/e3sconf/202452901045
Published online 29 May 2024
  1. Amjath B, Vidhya K and Revathi S, Study on ferrocement-based strengthening of Reinforced concrete column, Emperor Journal of Applied Scientific Research, Vol. 4 Issue–11, pp.1–5, (2022). [Google Scholar]
  2. Aprael S. Yaroa and Kabas F. Talib, Corrosion Inhibition of Mild Steel by Curcuma Extract in Petroleum Refinery Wastewater, Iraqi Journal of Chemical and Petroleum Engineering, Vol.15, pp.9–18, (2014). [CrossRef] [Google Scholar]
  3. Bagga, ManpreetGadi, RanuYadav, Ompal Kumar, Raman Chopra, Rashi Singh and Gurmeet, Investigation of phytochemical components and corrosion inhibition property of Ficusracemosa stem extract on Mild steel in H2SO4 medium, Journal of Environmental Chemical Engineering, 4, (2016). 10.1016/j.jece.2016.10.022. [Google Scholar]
  4. IS: 2386 ( Part I) – 1963, ‘Methods of test for concrete part 1 particle size and shape’, Bureau of Indian Standards, NewDelhi. [Google Scholar]
  5. IS 1199 (1959), ‘Methods of sampling and Analysis of concrete’, Bureau of Indian Standards, NewDelhi. [Google Scholar]
  6. IS 383: 1970, ‘Specification for coarse and fine aggregates from natural sources for concrete’, Second revision, Bureau of Indian Standards, New Delhi. [Google Scholar]
  7. K.K. Alaneme, S.J. Olusegun, A.W. Alo, Corrosion inhibitory properties of elephant grass (Pennisetumpurpureum) extract: Effect on mild steel corrosion in 1M HCl solution, Alexandria Engineering Journal, Vol.55, Issue 2, pp.1069–1076, (2016). [CrossRef] [Google Scholar]
  8. Kavitha E, Vidhya K, Revathi S, Shivasakthivadivelan R A, Development Of Eco-Friendly Masonry Blocks Made From Industrial Residues, International Research Journal of Engineering and Technology (IRJET), 09 (12), pp.799–801, (2022). [Google Scholar]
  9. Lisha C. Rajalingam and Sunilaa George, corrosion resistance of reinforced concrete with green corrosion inhibitors, International Journal of Engineering Science Invention Research & Development, Vol.3, Issue XI, pp.687–691, (2017). [Google Scholar]
  10. Revathi S and Vidhya K, Eco-sustainable alkali activated brick using municipal incinerated ash, International Journal of Coal Preparation and Utilization, 42(3), pp.331–348, (2021).https://doi.org/10.1080/19392699.2021.2007480. [Google Scholar]
  11. Revathi S and R.S Gandhimathi, Experimental Investigation on Mechanical Properties of Hybrid Fibres in M25 Grade Concrete with Partial Replacement of Cement Using GGBS, Recent Trends In Civil Engineering & Technology, 6(2), pp.51–56, (2016). [Google Scholar]
  12. Revathi S, Experimental Investigation On stress - strain behaviour of brick prism, Integrated Journal of Engineering Research and Technology (IJERT), Volume 3,Issue 4, pp.276–282, (2015). [Google Scholar]
  13. Revathi S, Vidhya K, Kavitha E and Shivasakthivadivelan R A, Study on the development and behavior of green geopolymerbricks, International Research Journal of Engineering and Technology (IRJET), Vol. 09, Issue. 12, pp.927–930, (2022). [Google Scholar]
  14. Revathi S, R.S Gandhimathi and Saranya S, Experimental Investigation On Structural Behaviour Of Hybrid Fibres In M25 Grade Concrete, International journal of innovations in engineering and technology(IJIET), volume 6, Issue 3, pp. 213–220, (2016). [Google Scholar]
  15. Vidhya K and Revathi S, Performance evaluation of industrial ash geopolymer-based bricks, Journal For Basic Sciences, Volume 23, Issue11, pp. 534–539, (2023). [Google Scholar]
  16. Sudharsan N, S Praburanganathan, Yeddula Bharath Simha Reddy & Pavan Kumar P (2022), Interaction of anthracite coal ash and Archishypogaea shell ash on an innovative brick: an experimental and simulation study, Coal Preparation, https://doi.org/10.1080/19392699.2022.2089127 [Google Scholar]
  17. Vidhya K, Revathi S and R A Shivasakthivadivelan, Utilization of Industrial Ash in Paver Blocks, Journal of Xi’an University of Architecture & Technology, Volume XII, Issue IV, pp.4883–4889, (2020). [Google Scholar]
  18. Mondikatti, P., Sudharsan, N., Praburanganathan, S., & Aruna, G. (2023). The Impact of castoff aggregate on the fresh and mechanical behaviour of high-range water reducer administered self-compacting concrete. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.03.061 [Google Scholar]
  19. Vidhya K, S. Kandasamy, Experimental Investigations on the Properties of Coal-Ash Brick Units as Green Building Materials, International Journal of Coal Preparation and Utilization 36 (6), volume 36, Issue-6, pp.318–325, (2016). [CrossRef] [Google Scholar]
  20. Praburanganathan, S., Sudharsan, N., BharathSimha Reddy, Y., Naga Dheeraj Kumar Reddy, C., Natrayan, L., & Paramasivam, P. (2022). Force-Deformation Study on Glass Fiber Reinforced Concrete Slab Incorporating Waste Paper. Advances in Civil Engineering, 2022. https://doi.org/10.1155/2022/5343128 [Google Scholar]
  21. Vidhya K, Shivasakthivadivelan R A, Kavitha K and Revathi S, Experimental Study on Greener Brick Using Sustainable Materials, Emperor Journal of Applied Scientific Research, 2(8), (2020). [Google Scholar]
  22. Vidhya K, Thamarai Selvan R, Saradha P, Revathi S and Nithya B, Determination of Mechanical Properties of Industrial Ash Brick, Emperor Journal of Applied Scientific Research Vol 2, Issue 4, pp.21–27, (2020). https://doi.org/10.35337/EJASR.2020.v02i04.004. [CrossRef] [Google Scholar]
  23. VidhyaKumarasamy, RevathiSampath and Kandasamy S, Experimental Study on Hardened Mechanical and Durability Properties of Industrial Ash Bricks, Iranian Journal of Science and Technology, Transactions of Civil Engineering, 46, pp.1929–1936, (2022). https://doi.org/10.1007/s40996–021-00783–9. [CrossRef] [Google Scholar]
  24. Arunkumar, Kadarkarai, Muthiah Muthukannan, Arunachalam Suresh Kumar, Arunasankar Chithambar Ganesh, and Rangaswamy Kanniga Devi. 2022a. “Cleaner Environment Approach by the Utilization of Low Calcium Wood Ash in Geopolymer Concrete.” Applied Science and Engineering Progress 15 (1): 1–13. https://doi.org/10.14416/j.asep.2021.06.005. [Google Scholar]
  25. Arunvivek, G. K., and D. Rameshkumar. 2022. “Experimental Investigation on Feasibility of Utilizing Phosphogypsum in E-Glass Fiber-Incorporated Non-Fired Ceramic Wall Tile.” Journal of The Institution of Engineers (India): Series A 103 (2): 445–51. https://doi.org/10.1007/s40030–021-00604–2. [CrossRef] [Google Scholar]
  26. Prithiviraj, Chidambaram, Packirisamy Swaminathan, Deivasigamani Ramesh Kumar, Gunasekaran Murali, and Nikolai Ivanovich Vatin. 2022. “Fresh and Hardened Properties of Self-Compacting Concrete Comprising a Copper Slag.” Buildings 12 (7). https://doi.org/10.3390/buildings12070965. [Google Scholar]
  27. Sankar, B., and P. Ramadoss. 2022. “Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-Performance Concrete.” International Journal of Engineering, Transactions B: Applications 35 (8): 1629–40. https://doi.org/10.5829/IJE.2022.35.08B.19. [Google Scholar]
  28. Sankar, B, and P Ramadoss. 2023. “Results in Control and Optimization Modelling the Compressive Strength of High-Performance Concrete Containing Metakaolin Using Distinctive Statistical Techniques.” Results in Control and Optimization 12 (December 2022): 100241. https://doi.org/10.1016/j.rico.2023.100241. [Google Scholar]
  29. Arunkumar, Kadarkarai, Muthiah Muthukannan, Arunachalam Suresh Kumar, Arunasankar Chithambar Ganesh, and Rangaswamy Kanniga Devi. 2021. “Production of Eco-Friendly Geopolymer Concrete by Using Waste Wood Ash for a Sustainable Environment.” Pollution 7(4):993–1006. doi: 10.22059/POLL.2021.320857.1039. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.