EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 544 (2024) E3S Web of Conf., 544 (2024) 08001 References
Open Access
Issue
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
Article Number 08001
Number of page(s) 8
Section Behaviour, Characterization and Modelling of Various Geomaterials and Interfaces - Anisotropy and Localisation
DOI https://doi.org/10.1051/e3sconf/202454408001
Published online 02 July 2024
  1. Addenbrooke, T. I., D. M. Potts, A. M. Puzrin “The influence of pre-failure soil stiffness on the numerical analysis of tunnel construction” Géotechnique, 47(3), 693–712, 1997. https://doi.org/10.1680/geot.1997.47.3.693 [CrossRef] [Google Scholar]
  2. Andersen, K. “Bearing capacity under cyclic loading - Offshore, along the coast, and on land”. Canadian Geotechnical Journal, 46 (5), 513–535, 2009. https://doi.org/10.1139/T09-003 [CrossRef] [Google Scholar]
  3. Andersen, K. “Cyclic soil parameters for offshore foundation design”. Meyer (ed.). Frontiers in Offshore Geotechnics III, ISFOG.1 pp. 5–82, 2015. [Google Scholar]
  4. Brosse, A. M., R. Hosseini Kamal, R. J. Jardine, M. R. Coop. “The shear stiffness characteristics of four Eocene-to-Jurassic UK stiff clays”. Géotechnique, 67(3), 242–259. 2017, https://doi.org/10.1680/jgeot.15.P.236 [CrossRef] [Google Scholar]
  5. Brosse, A. M., R. J. Jardine, S. Nishimura. “The undrained shear strength anisotropy of four Jurassic to Eocene stiff clays” Géotechnique, 67(8), 653–671, 2017. https://doi.org/10.1680/jgeot.15.P.227 [CrossRef] [Google Scholar]
  6. Byrne, B. W., R. A. McAdam, H. J. Burd, G. T. Houlsby, C. M. Martin, W. Beuckelaers, L. Zdravkovic, D. M. G. Taborda, D. M. Potts, R. J. Jardine, E. Ushev, T. Liu, D. Abadias, K. Gavin, D. Igoe, P. Doherty, J. S. Gretlund, M. P. Andrade, A. Muir Wood, F. Schroeder, S. Turner, M. Plummer. “PISA: New design methods for offshore wind turbine monopiles”. Society for Underwater Technology: 8th International Conference on Offshore Site Investigation and Geotechnics, London, UK, vol. 1, pp. 142–161, 2017. [Google Scholar]
  7. Byrne, B. W. “Lateral pile design for offshore wind turbines” In Piling 2020: Proceedings of the Piling 2020 Conference, pp. 13–33. ICE Publishing, 2021. [Google Scholar]
  8. Clarke, B. G., D. B. Hughes, S. Hashemi. Physical characteristics of subglacial tills. Géotechnique, 58(1), 67–76, 2018. https://doi.org/10.1680/geot.2008.58.1.67 [Google Scholar]
  9. Clarke, B. G. “The engineering properties of glacial tills”. Geotechnical Research 5(4), 262–277, 2018. https://doi.org/10.1680/jgere.18.00020 [CrossRef] [Google Scholar]
  10. Davies, B. J., D. H. Roberts, D. R. Bridgland, C. Ó Cofaigh, J. B. Riding. “Provenance and depositional environments of Quaternary sediments from the western North Sea Basin” Journal of Quaternary Science. 26(1), 59–75, 2011. https://doi.org/10.1002/jqs.1426 [CrossRef] [Google Scholar]
  11. Fullerton, D. S., C. A. Bush, J. N. Pennell. Map of surficial deposits and materials in the eastern and central United States (East of 102 degrees West longitude. Report 2789, 2003. https://doi.org/10.3133/i2789 [Google Scholar]
  12. Gasparre, A., S. Nishimura, N. A. Minh, M. R. Coop, R. J. Jardine. 2007 “The stiffness of natural London Clay”. Géotechnique, 57(1), 33–47. https://doi.org/10.1680/geot.2007.57.1.33 [CrossRef] [Google Scholar]
  13. Jardine, R. J., K. Andersen, A. Puech. “Cyclic loading of offshore piles: potential effects and practical design”. Proc 7th Int. Conf. on Offshore Site Investigations and Geotechnics, SUT London, pp 59–100, 2012. [Google Scholar]
  14. Jeanjean, P., Y. Zhang, A. Zakeri, K. Andersen, R. Gilbert, A. I. M. J. Senanayake. “A framework for monotonic p-y curves in clays”. Society for Underwater Technology: 8th International Conference on Offshore Site Investigation and Geotechnics, London, UK, vol. 1, pp. 108–141, 2017. [Google Scholar]
  15. Liu, T. “Advanced laboratory testing for offshore pile foundations under monotonic and cyclic loading”, PhD Thesis, Imperial College London, 2018. [Google Scholar]
  16. Liu, T., E. Ushev, R. J. Jardine. “Anisotropic stiffness and shear strength characteristics of a stiff glacial till”. ASCE J. of Geotech. Geoenv. Eng., 146(12), 2020 https://doi.org/10.1061/(ASCE)GT.1943-5606.0002387 [Google Scholar]
  17. Liu, T., R. J. Jardine, K. Vinck, S. K. Ackerley. “Optimization of advanced laboratory monotonic and cyclic triaxial testing on fine sands”. ASTM Geotechnical Testing Journal 45(6), 2022. https://doi.org/10.1520/GTJ20210190 [Google Scholar]
  18. Nishimura, S., N. A. Minh, R. J. Jardine. “Shear strength anisotropy of natural London Clay”. Géotechnique, 57(1), 49–62, 2007. https://doi.org/10.1680/geot.2007.57.1.49 [CrossRef] [Google Scholar]
  19. Nishimura, S. “Cross-anisotropic deformation characteristics of natural sedimentary clays”. Géotechnique 64(12): 981–996, 2014. https://doi.org/10.1680/geot.14.P.088 [CrossRef] [Google Scholar]
  20. Powell, J., A. Butcher. “Characterisation of a glacial clay till at Cowden, Humberside”. In Proceedings of the Int. Workshop on Characterisation and Engineering Properties of Natural Soils. (Tan, T. S., Phoon, K. K., Hight, D. W. & Leroueil, S. (Eds)) CRC Press, London, 983–1020, 2003. [Google Scholar]
  21. Ratananikom, W., S. Likitlersuang, S. Yimsiri. “An investigation of anisotropic elastic parameters of Bangkok Clay from vertical and horizontal cut specimens”. Geomechanics and Geoengineering 8(1), 15–27, 2013. https://doi.org/10.1080/17486025.2012.726746 [CrossRef] [Google Scholar]
  22. Ushev, E. “Laboratory investigation of the mechanical properties of Cowden till under static and cyclic conditions”, PhD Thesis, Imperial College London, 2018. [Google Scholar]
  23. Ushev, E., R. J. Jardine. “The behaviour of Bolders Bank glacial till under undrained cyclic loading”. Géotechnique, 72(1), 1–19, 2022a. https://doi.org/10.1680/jgeot.18.P.236 [Google Scholar]
  24. Ushev, E., R. J. Jardine. “The mechanical behaviour of Bolders Bank till”. Canadian Geotechnical Journal, 59, 2163–2183, 2022b. https://doi.org/10.1139/cgj-2021-0436 [CrossRef] [Google Scholar]
  25. Ushev, E., T. Liu, R. J. Jardine. “Engineering properties of a stiff Bolder Bank glacial till at Cowden”. Submitted to Offshore Site Investigation and Geotechnics Conference, Society of Underwater Technology, London, UK, 2023. [Google Scholar]
  26. Wichtmann, T., A. Niemunis, T. Triantafyllidis. “Strain accumulation in sand due to cyclic loading: drained triaxial tests”. Soil Dyn. and Earthquake Eng., 25 (11), 967–979, 2005. https://doi.org/10.1016/j.soildyn.2005.02.022 [CrossRef] [Google Scholar]
  27. Zdravković, L., D. M. Potts, R. J. Jardine (2001). A parametric study of the pull-out capacity of bucket foundations in soft clay. Géotechnique, 51, 1 pp 55 -67. https://doi.org/10.1680/geot.2001.51.1.55 [Google Scholar]
  28. Zdravković, L., B. W. Byrne, D. M. G. Taborda, H. J. Burd, K. Gavin, G. T. Houlsby, D. Igoe, R. J. Jardine, T. Liu, C. M. Martin, R. A. McAdam, A. Muir Wood, D. M. Potts, J. Skov Gretlund, E. Ushev “Ground characterisation for PISA pile testing and analysis”. Géotechnique, 70(11), 945–960, 2020. https://doi.org/10.1680/jgeot.18.PISA.001 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.