EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 544 (2024) E3S Web of Conf., 544 (2024) 14007 References
Open Access
Issue
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
Article Number 14007
Number of page(s) 8
Section Behaviour, Characterization and Modelling of Various Geomaterials and Interfaces - Sensitive and Liquefiable Soils: Tailings and Other Highly Brittle Strain-Softening Soils
DOI https://doi.org/10.1051/e3sconf/202454414007
Published online 02 July 2024
  1. Alarcon-Guzman A, Leonards GA, Chameau JL. 1988. Undrained Monotonic and Cyclic Strength of Sands. Journal of geotechnical engineering 114: 1089–1109. [CrossRef] [Google Scholar]
  2. Arthur JRF, Menzies BK. 1972. Inherent anisotropy in a sand. Geotechnique 22: 115–128. [CrossRef] [Google Scholar]
  3. Bahadori H, Ghalandarzadeh A, Towhata I. 2008. Effect of non plastic silt on the anisotropic behavior of sand. Soils and Foundations 48: 531–545. [CrossRef] [Google Scholar]
  4. Been K. 2016. Characterizing mine tailings for geotechnical design. Australian Geomechanics Journal 51. [Google Scholar]
  5. Been K, Jefferies MG. 1985. A state parameter for sands. Geotechnique 35: 99–112. [CrossRef] [Google Scholar]
  6. Chiaro G, Kiyota T, Koseki J. 2013. Strain localization characteristics of loose saturated Toyoura sand in undrained cyclic torsional shear tests with initial static shear. Soils and Foundations 53: 23–34. [CrossRef] [Google Scholar]
  7. Fanni R, Reid D, Fourie A. 2022a. On reliability of inferring liquefied shear strengths from simple shear testing. Soils and Foundations 62: 101151. [Google Scholar]
  8. Fanni R, Reid D, Fourie AB. 2022b. Effect of principal stress direction on the instability of sand under the constant shear drained stress path. Geotechnique. Ahead of print. [Google Scholar]
  9. Fanni R, Reid D, Fourie AB. 2023. Drained simple shear tests using a torsional shear hollow cylinder apparatus. Soils and Foundations. Under review ICOLD. 2022. Tailings Dam Safety Bulletin - Draft. [Google Scholar]
  10. Jefferies M. 2018. Critical state soil mechanics: 125 years of history to current use. Jenning Lecture 2018. [Google Scholar]
  11. Jefferies M, Been K. 2015. Soil Liquefaction: A Critical State Approach, Second Edition. CRC Press. [Google Scholar]
  12. Konrad J-M. 1990. Minimum Undrained Strength of Two Sands. Journal of Geotechnical Engineering116: 6. [Google Scholar]
  13. Morgenstern N. 2018. Geotechnical Risk, Regulation, and Public Policy (Victor de Mello Lecture). Soils and Rocks 41: 107–129. [CrossRef] [Google Scholar]
  14. Morgenstern NR, Vick SG, Viotti CB, Watts BD. 2016. Fundao Tailings Dam Review Panel: Report on the immediate causes of the failure of the Fundao Dam. [Google Scholar]
  15. Murthy TG, Loukidis D, Carraro JAH, Prezzi M, Salgado R. 2007. Undrained monotonic response of clean and silty sands. Geotechnique 57: 273–288. [CrossRef] [Google Scholar]
  16. Nakata Y, Hyodo M, Murata H, Yasufuku N. 1998. Flow deformation of sands subjected to principal stress rotation. Soils and Foundations 38: 115–128. [CrossRef] [Google Scholar]
  17. Nishimura S, Minh NA, Jardine RJ. 2007. Shear strength anisotropy of natural London Clay. Geotechnique 57: 49–62. [CrossRef] [Google Scholar]
  18. Olson SM, Stark TD. 2002. Liquefied strength ratio from liquefaction flow failure case histories. Canadian Geotechnical Journal 39: 629–647. [CrossRef] [Google Scholar]
  19. Reid D, Fanni R, Fourie A. 2022a. Effect of Tamping Conditions on the Shear Strength of Tailings. International Journal of Geomechanics 22: 04021288. [Google Scholar]
  20. Reid D, Fanni R, Fourie A. 2022b. Assessing the undrained strength cross-anisotropy of three tailings types. Geotechnique Letters 12: 1–7. [Google Scholar]
  21. Reid D, Fanni R, Fourie AB. 2022c. Discussion of “Evaluation of flow liquefaction and liquefied strength using the cone penetration test: an update.” Canadian Geotechnical Journal. Ahead of print. [Google Scholar]
  22. Reid D, Fourie F, Fanni R. 2022d. Layering - the missing factor in fabric studies? 20th International Conference on Soil Mechanics and Geotechnical Engineering. [Google Scholar]
  23. Reid D, Simms P, Sivathayalan S, Fanni R, Fourie A. 2022e. The “air dried” specimen reconstitution technique – review, refinements, and applications. Tailings and Mine Waste 2022. [Google Scholar]
  24. Reid D, Urbina F, Tiwari B, Fanni R, Smith K, Fourie AB. 2023. Effect of saturation confining pressure on accessible densities and shear behaviour of a sandy silt tailings. Geotechnique Letters. Under review. [Google Scholar]
  25. Robertson P. 2021. Evaluation of flow liquefaction and liquefied strength using the cone penetration test: An update. Canadian Geotechnical Journal. Ahead of print. [Google Scholar]
  26. Robertson PK. 2010. Evaluation of Flow Liquefaction and Liquefied Strength Using the Cone Penetration Test. Journal of Geotechnical and Geoenvironmental Engineering 136: 842–853. [CrossRef] [Google Scholar]
  27. Sadrekarimi A. 2014. Effect of the Mode of Shear on Static Liquefaction Analysis. Journal of Geotechnical and Geoenvironmental Engineering 140: 12. [Google Scholar]
  28. Santamarina JC, Cho GC. 2001. Determination of critical state parameters in sandy soils—simple procedure. Geotechnical Testing Journal 24: 185–192. [CrossRef] [Google Scholar]
  29. Shuttle DA, Cunning J. 2007. Liquefaction potential of silts from CPTu. Canadian Geotechnical Journal 44: 1–19. [CrossRef] [Google Scholar]
  30. Sivathayalan S, Vaid YP. 2002. Influence of generalized initial state and principal stress rotation on the undrained response of sands. Canadian Geotechnical Journal 39: 63–76. [CrossRef] [Google Scholar]
  31. Umar M, Kiyota T, Chiaro G, Duttine A. 2021. Postliquefaction deformation and strength characteristics of sand in torsional shear tests. Soils and Foundations 61: 1207–1222. [Google Scholar]
  32. Verdugo R, Ishihara K. 1996. The steady state of sandy soils. Soils and Foundations 36: 81–91. [CrossRef] [Google Scholar]
  33. Yoshimine M, Ishihara K, Vargas W. 1998. Effects of principal stress direction and intermediate principal stress on undrained shear behaviour of sand. Soils and Foundations 38: 179–188. [CrossRef] [Google Scholar]
  34. McQuerry, M. 2018. “Validation of a Clothing Heat Transfer Model in Nonisothermal Test Conditions.” J Test Eval 46, no. 1 (January/February): 1–7. http://doi.org/10.1520/JTE20170073 [Google Scholar]
  35. National Stone, Sand, and Gravel Association (NSSGA). 2013. The Aggregates Handbook, 2nd ed. Englewood, CO: Society of Mining, Metallurgy, and Exploration. [Google Scholar]
  36. Nye, J. F. 1972. Physical Properties of Crystals. Oxford: Clarendon Press. [Google Scholar]
  37. Oden, C. P., C. L. Ho, and H. F. Kashani. 2018. “Man-Portable Real-Time Ballast Inspection Device Using Ground-Penetrating Radar.” In Railroad Ballast Testing and Properties, edited by T. Stark, R. Swan, and R. Szecsy, 77–104. West Conshohocken, PA: ASTM International. http://doi.org/10.1520/STP160520170023 [Google Scholar]
  38. Stark, T., R. Swan, and R. Szecsy, eds. 2018. Railroad Ballast Testing and Properties. West Conshohocken, PA: ASTM International, http://doi.org/10.1520/STP1605-EB [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.