Open Access
Issue |
E3S Web Conf.
Volume 545, 2024
2024 9th International Conference on Sustainable and Renewable Energy Engineering (ICSREE 2024)
|
|
---|---|---|
Article Number | 02001 | |
Number of page(s) | 11 | |
Section | Solar Photovoltaic Technology and Building Integrated Photovoltaics | |
DOI | https://doi.org/10.1051/e3sconf/202454502001 | |
Published online | 04 July 2024 |
- M. Abraim et al., “Techno-economic assessment of soiling losses in CSP and PV solar power plants: A case study for the semi-arid climate of Morocco,” Energy Convers. Manag., vol. 270, p. 116285, Oct. 2022, doi: 10.1016/J.ENCONMAN.2022.116285. [CrossRef] [Google Scholar]
- I. E. A. International and E. Agency, “World Energy Outlook,” 2023. [Google Scholar]
- S. S. Bhakre, P. D. Sawarkar, and V. R. Kalamkar, “Experimental study on photovoltaic panel integrated with Polyethylene Glycol 1500 phase change material,” J. Energy Storage, vol. 55, no. PB, p. 105518, 2022, doi: 10.1016/j.est.2022.105518. [CrossRef] [Google Scholar]
- S. R. Mousavi Baygi and S. M. Sadrameli, “Thermal Management of Photovoltaic Solar Cells Using Polyethylene Glycol1000 (PEG1000) as a Phase Change Material,” Therm. Sci. Eng. Prog., vol. 5, no. January, pp. 405–411, 2018, doi: 10.1016/j.tsep.2018.01.012. [CrossRef] [Google Scholar]
- F. Jamil et al., “Evaluation of photovoltaic panels using different nano phase change material and a concise comparison : An experimental study,” vol. 169, 2021, doi: 10.1016/j.renene.2021.01.089. [Google Scholar]
- A. Hasan, S. J. Mccormack, M. J. Huang, and B. Norton, “Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics,” Sol. Energy, vol. 84, no. 9, pp. 1601–1612, 2010, doi: 10.1016/j.solener.2010.06.010. [CrossRef] [Google Scholar]
- A. Yadav and F. Grubišic, “Water spray cooling technique applied on a photovoltaic panel : The performance response,” vol. 108, pp. 287–296, 2016, doi: 10.1016/j.enconman.2015.10.079. [Google Scholar]
- E. Wilson, “Theoretical and operational thermal performance of a ‘wet’ crystalline silicon PV module under Jamaican conditions,” Renew. Energy, vol. 34, no. 6, pp. 1655–1660, 2009, doi: 10.1016/j.renene.2008.10.024. [CrossRef] [Google Scholar]
- H. M. Maghrabie, A. S. A. Mohamed, and M. S. Ahmed, “Improving Performance of Photovoltaic Cells via Active Air Cooling System,” Proc. 4th Int. Conf. Energy Eng., pp. 1–5, 2017. [Google Scholar]
- A. R. Amelia et al., “Cooling on Photovoltaic Panel Using Forced Air Convection Induced by DC Fan,” Int. J. Electr. Comput. Eng., vol. 6, no. 2, p. 526, 2016, doi: 10.11591/ijece.v6i2.9118. [Google Scholar]
- L. Gao, X. Zhang, and W. Hua, “Recent progress in photovoltaic thermal phase change material technology: A review,” J. Energy Storage, vol. 65, no. April, p. 107317, 2023, doi: 10.1016/j.est.2023.107317. [CrossRef] [Google Scholar]
- M. Salihi, M. El Fiti, and Y. Harmen, “Energetic Performance Evaluation of Walls Incorporating Phase Change Material ( PCM ) Under Semi-Arid Climate of Benguerir City,” no. November, 2021, doi: 10.1109/IRSEC53969.2021.9741121. [Google Scholar]
- I. Dincer, H. S. Hamut, and N. Javani, Thermal management of electric vehicle battery systems. John Wiley \& Sons, 2016. [Google Scholar]
- M. El Fiti et al., “Energetic performance optimization of a coaxial phase change material (PCM) regenerator,” J. Energy Storage, vol. 50, no. October 2021, p. 104571, 2022, doi: 10.1016/j.est.2022.104571. [CrossRef] [Google Scholar]
- Y. Harmen, Y. Chhiti, M. El, and M. Salihi, “Eccentricity analysis of annular multi-tube storage unit with phase change material,” J. Energy Storage, vol. 64, no. January, p. 107211, 2023, doi: 10.1016/j.est.2023.107211. [CrossRef] [Google Scholar]
- X. Hu, X. Gong, F. Zhu, X. Xing, Z. Li, and X. Zhang, “Thermal analysis and optimization of metal foam PCM-based heat sink for thermal management of electronic devices,” Renew. Energy, vol. 212, no. November 2022, pp. 227–237, 2023, doi: 10.1016/j.renene.2023.05.021. [CrossRef] [Google Scholar]
- S. A. Nada and D. H. El-Nagar, “Possibility of using PCMs in temperature control and performance enhancements of free stand and building integrated PV modules,” Renew. Energy, vol. 127, pp. 630–641, Nov. 2018, doi: 10.1016/j.renene.2018.05.010. [CrossRef] [Google Scholar]
- H. M. Maghrabie, A. S. A. Mohamed, A. M. Fahmy, and A. A. Abdel, “Case Studies in Thermal Engineering Performance enhancement of PV panels using phase change material ( PCM ): An experimental implementation,” Case Stud. Therm. Eng., vol. 42, no. August 2022, p. 102741, 2023, doi: 10.1016/j.csite.2023.102741. [CrossRef] [Google Scholar]
- M. Lotfi, A. Hossein, and M. Firoozzadeh, “Experimental study on simultaneous use of phase change material and reflector to enhance the performance of photovoltaic modules,” J. Energy Storage, vol. 54, no. February, p. 105342, 2022, doi: 10.1016/j.est.2022.105342. [CrossRef] [Google Scholar]
- Q. Li, J. Jiang, Y. Hong, and J. Du, “Numerical investigation of thermal management performances in a solar photovoltaic system by using the phase change material coupled with bifurcated fractal fins,” J. Energy Storage, vol. 56, no. PC, p. 106156, 2022, doi: 10.1016/j.est.2022.106156. [CrossRef] [Google Scholar]
- L. Liu, J. Niu, and J. Wu, “Improving energy efficiency of photovoltaic / thermal systems by cooling with PCM nano-emulsions : An indoor experimental study,” Renew. Energy, vol. 203, no. October 2022, pp. 568–582, 2023, doi: 10.1016/j.renene.2022.12.090. [CrossRef] [Google Scholar]
- T. S. Energy, “Datasheet & Installation Guide Solar Irradiation Sensor [ SOZ 03 ] Internet of Things Solar Energy.” [Google Scholar]
- S. S. Joshi and A. M. Andhare, “A review on the selection of phase change materials for photovoltaic thermal management” 2021, doi: 10.1088/1757-899X/1130/1/012026. [Google Scholar]
- K. Velmurugan and S. Kumarasamy, “Review of PCM types and suggestions for an applicable cascaded PCM for passive PV module cooling under tropical climate conditions,” J. Clean. Prod., vol. 293, p. 126065, 2021, doi: 10.1016/j.jclepro.2021.126065. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.