EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 547 (2024) E3S Web of Conf., 547 (2024) 03005 References
Open Access
Issue
E3S Web of Conf.
Volume 547, 2024
International Conference on Sustainable Green Energy Technologies (ICSGET 2024)
Article Number 03005
Number of page(s) 6
Section Energy
DOI https://doi.org/10.1051/e3sconf/202454703005
Published online 09 July 2024
  1. S. Li, Y. Li, W. Choi, and B. Sarlioglu, “High-speed electric machines: Challenges and design considerations,” IEEE Trans. Transp. Electrif., vol. 2, no. 1, pp. 2–13, 2016. [CrossRef] [Google Scholar]
  2. V. Sivasubramaniyam, S. Ramasamy, M. Venkatraman, G. Gatto, and A. Kumar, “Carbon nanotubes as an alternative to copper wires in electrical machines: A review,” Energies, vol. 16, no. 9, p. 3665, 2023. [CrossRef] [Google Scholar]
  3. M. Wardach, P. Paplicki, and R. Palka, “A hybrid excited machine with flux barriers and magnetic bridges,” Energies, vol. 11, no. 3, p. 676, 2018 [CrossRef] [Google Scholar]
  4. E. Schubert, S. Li, and B. Sarlioglu, “High-speed surface permanent magnet machines - rotor design analysis, considerations, and challenges,” in 2016 IEEE Transportation Electrification Conference and Expo (ITEC), 2016. [Google Scholar]
  5. S. Kalt, J. Erhard, and M. Lienkamp, “Optimized stator design method using machine parameter permutation,” Forsch. Ingenieurwes., vol. 83, no. 4, pp. 853–861, 2019. [CrossRef] [Google Scholar]
  6. M. Lauerburg, P. Toraktrakul, and K. Hameyer, “Design morphology for high-speed rotors in electrical machines based on analytical models,” in 2023 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), 2023. [Google Scholar]
  7. G. Gallicchio et al., “High speed synchronous reluctance machines: Modeling, design and limits,” IEEE Trans. Energy Convers., vol. 37, no. 1, pp. 585–597, 2022 [CrossRef] [Google Scholar]
  8. M. Heroth, H. C. Schmid, and W. Hofmann, “Efficient sampling algorithm for electric machine design calculations incorporating empirical knowledge,” in 2022 International Conference on Electrical Machines (ICEM), 2022 [Google Scholar]
  9. A. Belahcen, F. Martin, M. E. Zaim, E. Dlala, and Z. Kolondzovski, “Particle swarm optimization of the stator of a high speed PM synchronous machine,” in Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation, 2010. [Google Scholar]
  10. A. Simion, L. Livadaru, S. Mihai, A. Munteanu, and C. G. Cantemir, “Induction machine with improved operating performances for electric trucks. A FEM-based analysis,” Adv. Electr. Comput. Eng., vol. 10, no. 2, pp. 71–76, 2010. [Google Scholar]
  11. J. Wang, R. Iwasaki, A. M. Bayen, and J. Harvey, “Future road transportation technology,” Int. J. Transp. Sci. Technol., vol. 5, no. 1, pp. iii–iv, 2016. [Google Scholar]
  12. X. Hu, Y. Li, C. Lv, and Y. Liu, “Optimal energy management and sizing of a dual motor-driven electric powertrain,” IEEE Trans. Power Electron., vol. 34, no. 8, pp. 7489–7501, 2019 [CrossRef] [Google Scholar]
  13. Y. Ji, P. Giangrande, W. Zhao, V. Madonna, H. Zhang, and M. Galea, “Lifetime estimation of corona-resistance wire for electrical machines operating under the partial discharge regime,” in 2023 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), 2023. [Google Scholar]
  14. M. U. Naseer, A. Kallaste, B. Asad, T. Vaimann, and A. Rassõlkin, “Design procedure and preliminary analysis for the introduction of axial asymmetry in the synchronous reluctance machines,” in 2023 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), 2023. [Google Scholar]
  15. T. El Hajji, S. Hlioui, F. Louf, M. Gabsi, G. Mermaz-Rollet, and M. Belhadi, “Optimal design of high-speed electric machines for electric vehicles: A case study of 100 kW V-shaped interior PMSM,” Machines, vol. 11, no. 1, p. 57, 2023. [CrossRef] [Google Scholar]
  16. S. Soltanipour, T. Thiringer, and J. Lindstrom, “Battery electric vehicle performance evaluation by considering punching effect on PMSM iron cores,” in 2022 International Conference on Electrical Machines (ICEM), 2022. [Google Scholar]
  17. R. Palka and M. Wardach, “Design and Application of Electrical Machines,” Energies, vol. 15, no. 2, p. 523, 2022. [CrossRef] [Google Scholar]
  18. S. Kalt, J. Erhard, and M. Lienkamp, “Electric machine design tool for permanent magnet synchronous machines and induction machines,” Machines, vol. 8, no. 1, p. 15, 2020. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.