EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01015 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01015
Number of page(s) 12
DOI https://doi.org/10.1051/e3sconf/202455201015
Published online 23 July 2024
  1. PV Sai Swaroop, A. Suresh, Effects of Fiber Orientation on Mechanical Properties and Analysis of Failures for Kevlar Epoxy Reinforced Composites, CVR Journal of Science and Technology, June 2021, 142-146,DOI: 10.32377/cvrjst2022. [CrossRef] [Google Scholar]
  2. B. Reetha, B. Nikhil, P. Mamatha, A. Suresh, Evaluation of Mechanical Properties and Simulation of Kevlar Epoxy Reinforced Composite with Silicon Carbide filler, I nternational Journal of Advances in Engineering and Management, Volume 3, Issue 5 May 2021, pp: 33-42,DOI: 10.35629/5252-03053342. [Google Scholar]
  3. Kashif, M.; Ngaini, Z.; Harry, A.V.; Vekariya, R.L.; Ahmad, A.; Zuo, Z.; Alarifi, A. An experimental and DFT study on novel dyes incorporated with natural dyes on titanium dioxide (TiO2 ) towards solar cell application. Appl. Phys. A 2020, 126, 1-13. [CrossRef] [Google Scholar]
  4. A. Suresh, P. Bhargavi, M. Kiran Kumar, Simulation and Mechanical Characterization on Kevlar epoxy reinforced composite with silicon carbide filler, Materials Today: Proceedings, June 2020, Volume 38, Part 5, 2021, Pages 2988-2995, https://doi.org/10.1016/j.matpr.2020.09.32. [CrossRef] [Google Scholar]
  5. Zhang, X.Z.; Xu, P.H.; Liu, G.W.; Ahmad, A.; Chen, X.H.; Zhu, Y.L.; Qiao, G.J. Synthesis, characterization and wettability of Cu-Sn alloy on the Si-implanted 6H-SiC. Coatings 2020, 10, 906. [CrossRef] [Google Scholar]
  6. Aravind, M.; Ahmad, A.; Ahmad, I.; Amalanathan, M.; Naseem, K.; Mary, S.M.M.; Zubair, M. Critical green routing synthesis of silverNPs using jasmine flower extract for biological activities and photocatalytical degradation of methylene blue. J. Environ. Chem. Eng. 2020, 9, 104877. [Google Scholar]
  7. Hussain, S.; Khan, A.J.; Arshad, M.; Javed, M.S.; Ahmad, A.; Shah, S.S.A.; Khan, M.R.; Akram, S.; Zulfiqar Ali, S.; et al. Charge storage in binder-free 2D-hexagonal CoMoO4 nanosheets as a redox active material for pseudocapacitors. Ceram. Int. 2020. [Google Scholar]
  8. Saleem, M.; Irfan, M.; Tabassum, S.; Alothman, Z.; Javed, M.S.; Hussain, S.; Zubair, M. Experimental and theoretical study of highly porous lignocellulose assisted metal oxide photoelectrodes for dye-sensitized solar cells. Arab. J. Chem. 2020, 14, 102937. [Google Scholar]
  9. A. Suresh, B. Vidhya Darshini, C. Laxmi Sruthi, Madhusudhan Reddy, Mechanical Characterization and Failure analysis of Kevlar epoxy reinforced composites with alterations in fiber orientations, 2021, National Conference on Recent Innovations in Scienceand Technology, CVR College of Engineering, Hyderabad. [Google Scholar]
  10. Madkour, L.H. Nanoelectronic Materials: Fundamentals and Applications; Springer: Berlin/Heidelberg, Germany, 2019; Volume 116. [CrossRef] [Google Scholar]
  11. Zhan, M.; Hussain, S.; AlGarni, T.S.; Shah, S.; Liu, J.; Zhang, X.; Liu, G. Facet controlled polyhedral ZIF-8 MOF nanostructures for excellent NO2 gas-sensing applications. Mater. Res. Bull. 2021, 136, 111133. [CrossRef] [Google Scholar]
  12. Kashif, M.; Jaafar, E.; Bhadja, P.; Low, F.W.; Sahari, S.K.; Hussain, S.; Al-Tamrah, S.A. Effect of potassium permanganate on morphological, structural and electro-optical properties of graphene oxide thin films. Arab. J. Chem. 2020, 14, 102953. [Google Scholar]
  13. Tang, L.; Dang, J.; He, M.; Li, J.; Kong, J.; Tang, Y.; Gu, J. Preparation and properties of cyanate-based wave-transparent laminated composites reinforced by dopamine/POSS functionalized Kevlar cloth. Compos. Sci. Technol. 2019, 169, 120-126. [CrossRef] [Google Scholar]
  14. Pandey, J.; Nagarajan, V.; Mohanty, A.K.; Misra, M. Commercial potential and competitiveness of natural fiber composites. In Biocomposites; Elsevier: Amsterdam, The Netherlands, 2015; pp. 1-15. [Google Scholar]
  15. Ahmad, A.; Mubharak, N.M.; Naseem, K.; Tabassum, H.; Rizwan, M.; Najda, A.; Hussain, S. Recent advancement and development of chitin and chitosan-based nanocomposite for drug delivery: Critical approach to clinical research. Arab. J. Chem. 2020, 13, 8935-8964. [CrossRef] [Google Scholar]
  16. Reis, P.N.; Neto, M.A.; Amaro, A.M. Effect of the extreme conditions on the tensile impact strength of GFRP composites. Compos. Struct. 2018, 188, 48-54. [CrossRef] [Google Scholar]
  17. Mustafa, E.H.B.; Dyadyura, K.; Jan, V.; Harni'cárová, M.; Zajac, J.; Modrák, V.; Pandová, I.; Vrábel, P.; Nováková-Marcin'cínová, E.; Pavelek, Z. Manufacturing Technology of Composite Material Structure; Sudan University of Science and Technology: Khartoum, Sudan, 2017. [Google Scholar]
  18. Xiong, J.; Du, Y.; Mousanezhad, D.; Asl, M.E.; Norato, J.; Vaziri, A. Sandwich structures with prismatic and foam cores: A review. Adv. Eng. Mater. 2019, 21, 1800036. [CrossRef] [Google Scholar]
  19. Kwonpongsagoon, S.; Jareemit, S.; Kanchanapiya, P. Environmental impacts of recycled nonmetallic fraction from waste printed circuitboard. Int. J. Geomate 2017, 12, 8-14. [Google Scholar]
  20. Qi, L.; Ju, L.; Zhou, J.; Li, S.; Zhang, T.; Tian, W. Tensile and fatigue behavior of carbon fiber reinforced magnesium composite fabricated by liquid-solid extrusion following vacuum pressure infiltration. J. Alloys Compd. 2017, 721, 55-63. [CrossRef] [Google Scholar]
  21. Pervaiz, M.; Ahmad, I.; Yousaf, M.; Kirn, S.; Munawar, A.; Saeed, Z.; Rashid, A. Synthesis, spectral and antimicrobial studies of amino acid derivative Schiff base metal (Co, Mn, Cu, and Cd) complexes. Spectrochim. Acta Part A Mol. Biomol. Spectrosc. 2019, 206, 642-649. [Google Scholar]
  22. Rajesh Kumar, G.; Hariharan, V.; Saravanakumar, S.S. Enhancing the free vibration characteristics of epoxy polymers using sustainable phoenix Sp. fibers and nano-clay for machine tool applications. J. Nat. Fibers 2019, 1-8. [Google Scholar]
  23. Kabir, S.M.F.; Mathur, K.; Seyam, A.M. A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties. Compos. Struct. 2020, 232, 111476. [CrossRef] [Google Scholar]
  24. Anjum, N.; Suresha, B.; Prasad, S.L.A. Influence of Water ageing on mechanical properties of CaCO3 filler filled epoxy resin and sansevieria/carbon fiber reinforced composites. Open J. Compos. Mater. 2019, 9, 1-20. [CrossRef] [Google Scholar]
  25. Liu, M.; Rohde, B.J.; Krishnamoorti, R.; Robertson, M.L.; Dawood, M. Bond behavior of epoxy resin-polydicyclopentadiene phase separated interpenetrating networks for adhering carbon fiber reinforced polymer to steel. Polym. Eng. Sci. 2019, 60, 104-112. [Google Scholar]
  26. de Souza, L.C.; Rodrigues, N.S.; Cunha, D.A.; Feitosa, V.P.; Santiago, S.L.; Reis, A.; Loguercio, A.D.; Paris, T.; Saboia, V.D.A.; Perdigao, J. Two-year clinical evaluation of proanthocyanidins added to a two-step etch-and-rinse adhesive. J. Dent. 2019, 81, 7-16. [CrossRef] [Google Scholar]
  27. Braga, R.; Magalhaes, P.Jr. Analysis of the mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites. Mater. Sci. Eng. C 2015, 56, 269-273. [CrossRef] [Google Scholar]
  28. A. Suresh, A. Sai Kiran Goud, R. Srilekha, A. Praneeth, Testing and analysis of Kevlar epoxy reinforced composites made from 3D printing process, 2021, National Conference on Recent Innovations in Science and Technology, CVR College of Engineering, Hyderabad. [Google Scholar]
  29. Xavier, J.; Rodney, K.D.; Prakash, S.J. Mechanical characterisation of epoxy polymer composite reinforced with ramie and synthetic fiber. SSRN Electron. J. 2019. [Google Scholar]
  30. Kader, W.B. Physico-mechanical properties of typha angustata (elephant grass) fiber reinforced thermoplastic composites. IJAR J. 2019. [Google Scholar]
  31. Dolan, G.K.; Cartwright, B.; Bonilla, M.R.; Gidley, M.J.; Stokes, J.R.; Yakubov, G. Probing adhesion between nanoscale cellulose fibres using AFM lateral force spectroscopy: The effect of hemicelluloses on hydrogen bonding. Carbohydr. Polym. 2019, 208, 97-107.[CrossRef] [CrossRef] [Google Scholar]
  32. Dia, A.; Dieng, L.; Gaillet, L.; Gning, P.B. Damage detection of a hybrid composite laminate aluminum/glass under quasi-static and fatigue loadings by acoustic emission technique. Heliyon 2019, 5, e01414. [CrossRef] [PubMed] [Google Scholar]
  33. Phuong, P.T.M.; Won, H.J.; Oh, Y.J.; Lee, H.S.; Lee, K.D.; Park, S.Y. The chemistry and engineering of mussel-inspired glue matrix for tissue adhesive and hemostatic. J. Ind. Eng. Chem. 2019, 80, 749-756. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.