EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01048 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01048
Number of page(s) 13
DOI https://doi.org/10.1051/e3sconf/202455201048
Published online 23 July 2024
  1. Fale S, Likhite A, Bhatt J. Compressive, tensile and wear behavior of ex situ Al/AlN metal matrix nanocomposites. Journal of Composite Materials. 2015;49(16):1917-1928. [CrossRef] [Google Scholar]
  2. S.V. Alagarsamy and M. Ravichandran (2019). “Synthesis, microstructure and properties of TiO2 reinforced AA7075 matrix composites via stir casting route”, Materials Research Express, Vol. 6, pp.1-15 [Google Scholar]
  3. Adeolu A. Adediran, Abayomi A. Akinwande, Oluwatosin A. Balogun, Bayode J. Olorunfemi & M. Saravana Kumar. Optimization studies of stir casting parameters and mechanical properties of TiO2 reinforced Al7075 composite using response surface methodology. Scientific Reports (2021) 11:19860 [CrossRef] [PubMed] [Google Scholar]
  4. B. Vinoth, S.V. Alagarsamy, M. Meignanamoorthy and M. Ravichandran. (2022). Prediction of Tribological Performance of AA8011/wt.%ZrO2 based Composites Fabricated By Stir Casting Route. Part E: Journal of Process Mechanical Engineering. Vol. 236 (6), pp.2420-2433. [CrossRef] [Google Scholar]
  5. Bhiksha Gugulothu, R. Periyasamy, P. Anusha and Suresh Seetharaman, et al. Optimization of Stir-Squeeze Casting Parameters to Analyze the Mechanical Properties of Al7475/B4C/Al2O3/TiB2 Hybrid Composites by the Taguchi Method. Advances in Materials Science and Engineering. Vol. 2022, Article ID 3180442, 1-9 [Google Scholar]
  6. Shoufa Liua, Yinwei Wang, Muthuramalingam T and Anbuchezhiyan (2019) Effect of B4C and MOS2 reinforcement on micro structure and wear properties of aluminum hybrid composite for automotive applications. Compos. Part B. Eng. 176: 1-7 [Google Scholar]
  7. Yigezu BS, Jha PK, Mahapatra MM (2013) The key attributes of synthesizing ceramic particulate reinforced Al-based matrix composites through stir casting process: a review. Mater. Manuf. Process. 28: 969-979 [Google Scholar]
  8. Jiehua Wu, Baoshun Li, Jingkun GuoThe influence of addition of AlN particles on mechanical properties of SiO matrix composites doped with AlN particles. Materials Letters 41 1999 145-148 [CrossRef] [Google Scholar]
  9. Farooq Muhammad and Shawnam Jalal Optimization of stirrer parameters by Taguchi method for a better ceramic particle stirring performance in the production of Aluminum Alloy Matrix Composite Cogent Engineering (2023), 10: 2154005, 1-22. [Google Scholar]
  10. R. Karthik, K. Gopalakrishnan, R. Venkatesh, A. MohanaKrishnan, S. Marimuthu. Influence of stir casting parameters in mechanical strength analysis of Aluminium Metal Matrix Composites (AMMCs) Materials Today: Proceedings 62 2022, 1965-1968 [Google Scholar]
  11. Pugalenthi T, Arulraj M, Sowrirajan M, Vijayan S. Impact of stir-squeeze casting process parameters on tensile strength of hybrid aluminium matrix composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2022;236(6):2589-2598. [CrossRef] [Google Scholar]
  12. Rao, D.R., Srinivas, C. Influence of Process Parameters on Microstructure and Mechanical Properties of AS21-SiC Composites through Two-Step Stir-Casting. Silicon 15, 813-827 (2023). [Google Scholar]
  13. S. Divakar, S. Chitharthan, V.G Shanmugapriyan, S. Thalaieswaran, K. Gopinath. Optimization of process parameters for mechanical properties of Al- Al2O3- graphite hybrid composite fabricated using stir casting process, 65, Part 9, 2022, 3937-3945 [Google Scholar]
  14. Kamaraj L, Hariharasakthisudhan P, Arul Marcel Moshi A. Optimizing the ultrasonication effect in stir-casting process of aluminum hybrid composite using desirability function approach and artificial neural network. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2021;235(9):2007-2021. [Google Scholar]
  15. S.D. Saravanan and M. Senthilkumar Optimization of casting parameters on Al/RHA composite using Taguchi method Advanced Materials Research vols. 984-985 (2014) pp 291-296 [Google Scholar]
  16. J. Jebeen Moses, I. Dinaharan, S. Joseph Sekhar Prediction of influence of process parameters on tensile strength of AA6061/TiC aluminum matrix composites produced using stir casting Trans. Nonferrous Met. Soc. China 26(2016) 1498-1511 [CrossRef] [Google Scholar]
  17. V. Mohanavel and M. Ravichandran Optimization of Parameters to Improve the Properties of AA7178/Si3N4Composites Employing Taguchi Approach Silicon 14, 1381-1394 (2022) [Google Scholar]
  18. M. Arulraj, P.K. Palani and L. Venkatesh Optimization of Process Parameters in Stir Casting of Hybrid Metal Matrix (LM25/SiC/B4C) Composite Using Taguchi Method Journal of Advances in Chemistry, 13, 2017, 6038-6042 [Google Scholar]
  19. Hashim Hanizam, Mohd Shukor Salleh, Mohd Zaidi Omar, Abu Bakar Sulong Optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes -aluminium alloy composite through Taguchi method. 8(2), 2019, 2223-2231 [Google Scholar]
  20. Lu J and Lu Z (2010) Optimization of stirring parameters through numerical simulation for the preparation of aluminum matrix composite by stir casting process. J. Manuf. Sci. Eng. 132: 1-7 [Google Scholar]
  21. M. Ravichandran, M. Meignanamoorthy, G.P. Chellasivam, J. Vairamuthu, A. Senthil Kumar, B. Stalin. Effect of Stir Casting Parameters on Properties of Cast Metal Matrix Composite. Material Today: Proceedings, 22, 2020, 2606-2613. [CrossRef] [Google Scholar]
  22. V. Mahesh Kumar, C.V. Venkatesh Evaluation of Microstructure, Physical and Mechanical Properties of Al 7079 - AlN Metal Matrix Composites Mater. Res. Express 6, 2019, 126503 [Google Scholar]
  23. S.V. Alagarsamy and M. Ravichandran (2019). Investigations on tribological behaviour of AA7075-TiO2 composites under dry sliding conditions. Industrial Lubrication and Tribology, Vol.71, no.9, pp.1064-1071. [CrossRef] [Google Scholar]
  24. S. Balaji, C. Sivakandhan, P. Maniarasan, D. Deepak, et al. (2023). Effect of process parameters on machining behaviour using S/N ratio and ANOVA analysis. Materials Today: Proceedings, vol. 74, pp. 97-104. [CrossRef] [Google Scholar]
  25. M. Vinoth Kumar, M. Meignanamoorthy, S. Sakthivelu, et al. (2020).Optimization of material removal rate in CNC turning of AA2024 via Taguchi technique. Materials Today: Proceedings, Vol. 27, pp.1163-1167. [CrossRef] [Google Scholar]
  26. S.V. Alagarsamy and M. Ravichandran (2020). Parametric studies on dry sliding wear behaviour of A1-7075 alloy matrix composite using S/N ratio and ANOVA analysis. Materials Research Express, Vol. 7, pp. 1-17. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.