EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01051 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01051
Number of page(s) 8
DOI https://doi.org/10.1051/e3sconf/202455201051
Published online 23 July 2024
  1. Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603. [CrossRef] [EDP Sciences] [Google Scholar]
  2. Prasad, S. R., Ravindranath, K., & Devakumar, M. L. S. (2018). Experimental investigation and parametric optimization in abrasive jet machining on nickel 233 alloy using WASPAS and MOORA. Cogent Engineering, 5(1), 1497830. [CrossRef] [Google Scholar]
  3. Saravanan K, Sudeshkumar, M.P., Maridurai, T., Suyamburajan, V., & Jayaseelan, V. (2021). Optimization of SiC abrasive parameters on machining of Ti-6Al-4V alloy in AJM using Taguchi-Grey relational method. Silicon, 1-8. [Google Scholar]
  4. Routara, B. C., Nanda, B. K., Sahoo, A. K., Thatoi, D. N., & Nayak, B. B. (2011). Optimisation of multiple performance characteristics in abrasive jet machining using grey relational analysis. International Journal of Manufacturing Technology and Management, 24(1/2/3/4), 4. [CrossRef] [Google Scholar]
  5. Nassef, A., Elkaseer, A., Abdelnasser, E. S., Negm, M., & Qudeiri, J. A. (2018). Abrasive jet drilling of glass sheets: Effect and optimisation of process parameters on kerf taper. Advances in Mechanical Engineering, 10(1), 1687814017748435. [CrossRef] [Google Scholar]
  6. Nanda, B. K., Mishra, A., & Dhupal, D. (2017). Fluidized bed abrasive jet machining (FB-AJM) of K-99 alumina ceramic using SiC abrasives. The International Journal of Advanced Manufacturing Technology, 90, 3655-3672. [CrossRef] [Google Scholar]
  7. Dhuapl, D. (2022). Indian Patent No. 406529. Kolkata, Intellectual Property India, Government of India, The Patent Office. [Google Scholar]
  8. Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22. [Google Scholar]
  9. Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887. [CrossRef] [Google Scholar]
  10. Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 1-16. [CrossRef] [Google Scholar]
  11. Pradhan, S., & Dhupal, D. (2023). Machining of aluminium nitride ceramic with a hAJM process using SiC abrasives: Experiments and simulation. Journal of Manufacturing Processes, 95, 68-90. [CrossRef] [Google Scholar]
  12. Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035. [CrossRef] [Google Scholar]
  13. Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049. [CrossRef] [Google Scholar]
  14. Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14. [CrossRef] [Google Scholar]
  15. Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel-titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.