EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01111 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01111
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202455201111
Published online 23 July 2024
  1. Hajjeh, Hassan R. “Correlation between destructive and non-destructive strengths of concrete cubes using regression analysis.” Contemp. Eng. Sci 5, 10 (2012): 493-509. [Google Scholar]
  2. Bhosale, Nilam, and P. A. Salunkhe. “To establish relation between destructive and nondestructive tests on concrete.” Int. J. Eng. Res. Gen. Sci 4, 2 (2016): 634-644. [Google Scholar]
  3. Samson, Duna, and O. T. Moses. “Correlation between non-destructive testing (NDT) and destructive testing (DT) of compressive strength of concrete.” International Journal of Engineering Science Invention 3, 9 (2014): 12-17. [Google Scholar]
  4. Karahan, Şebnem, Aydin Büyüksaraç, and Ercan Işık. “The relationship between concrete strengths obtained by destructive and non-destructive methods.” Iranian Journal of Science and Technology, Transactions of Civil Engineering 44 (2020): 91-105. [CrossRef] [Google Scholar]
  5. Benyahia, K. A., M. Ghrici, S. Kenai, D. Breysse, and Z.M. Sbartai. “Analysis of the relationship between nondestructive and destructive testing of low concrete strength in new structures.” Asian Journal of Civil Engineering 18, 2 (2017): 191-205. [Google Scholar]
  6. Kheder, G. F. “A two stage procedure for assessment of in situ concrete strength using combined non-destructive testing.” Materials and structures 32 (1999): 410-417. [CrossRef] [Google Scholar]
  7. Velay-Lizancos, Mirian, Isabel Martinez-Lage, Miguel Azenha, Jose Granja, and Pablo Vazquez-Burgo. “Concrete with fine and coarse recycled aggregates: E-modulus evolution, compressive strength and non-destructive testing at early ages.” Construction and Building Materials 193 (2018): 323-331. [CrossRef] [Google Scholar]
  8. Wolfs, Rob JM, Freek P. Bos, and Theo AM Salet. “Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete.” Construction and Building Materials 181 (2018): 447-454. [CrossRef] [Google Scholar]
  9. Amini, Kamran, Mehdi Jalalpour, and Norbert Delatte. “Advancing concrete strength prediction using non-destructive testing: Development and verification of a generalizable model.” Construction and Building Materials 102 (2016): 762-768. [CrossRef] [Google Scholar]
  10. Saha, Ashish Kumer, Subhra Majhi, Prabir Kumar Sarker, Abhijit Mukherjee, Ayesha Siddika, Farhad Aslani, and Yan Zhuge. “Non-destructive prediction of strength of concrete made by lightweight recycled aggregates and nickel slag.” Journal of Building Engineering, 33 (2021): 101614. [CrossRef] [Google Scholar]
  11. Aydin, Ferhat, and Mehmet Saribiyik. “Correlation between Schmidt Hammer and destructive compressions testing for concretes in existing buildings.“ Scientific Research and Essays 5, 13 (2010): 1644-1648. [Google Scholar]
  12. Qurashi, Muhammad Ahmed, Syyed Adnan Raheel Shah, Muhammad Farhan, Muhammad Taufiq, Waleed Khalid, Hunain Arshad, Muhammad Tayyab, Gullnaz Shahzadi, and Muhammad Waseem. “Sustainable design and engineering: A relationship analysis between digital destructive and non-destructive testing process for lightweight concrete.” Processes 7, no., 11 (2019): 791. [CrossRef] [Google Scholar]
  13. Saremi, Setare Ghahri, and Dimitrios Goulias. “Concrete strength gain monitoring with non-destructive methods for potential adoption in quality assurance.” Construction and Building Materials, 260 (2020): 120464. [CrossRef] [Google Scholar]
  14. Bhosale A, Nilam, and P. A. Salunkhe. “To establish relation between destructive and nondestructive tests on concrete.” Int. J. Eng. Res. Gen. Sci 4, 2 (2016): 634-644. [Google Scholar]
  15. Malek, Jedidi, and Machta Kaouther. “Destructive and non-destructive testing of concrete structures.” Jordan journal of civil engineering 8, no. 4 (2014): 432-441. [Google Scholar]
  16. Suji Prasad, S. J., M. Thangatamilan, M. Suresh, Hitesh Panchal, Christober Asir Rajan, C. Sagana, B. Gunapriya, Aditi Sharma, Tusharkumar Panchal, and Kishor Kumar Sadasivuni. “An efficient LoRa-based smart agriculture management and monitoring system using wireless sensor networks.” International Journal of Ambient Energy 43, 1 (2022): 5447-5450. [CrossRef] [Google Scholar]
  17. Joseph, Sudha, Kavitha Joseph, Trevor C. Lindley, and David Dye. “The role of dwell hold on the dislocation mechanisms of fatigue in a near alpha titanium alloy.” International Journal of Plasticity, 131 (2020): 102743. [CrossRef] [Google Scholar]
  18. Prasad, C. Durga, S. Kollur, M. Nusrathulla, G. Satheesh Babu, M. B. Hanamantraygouda, B. N. Prashanth, and N. Nagabhushana. “Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process.” Transactions of the IMF 102, 1 (2024): 22-28. [CrossRef] [Google Scholar]
  19. Meenal, R., D. Binu, K. C. Ramya, Prawin Angel Michael, K. Vinoth Kumar, E. Rajasekaran, and B. Sangeetha. “Weather forecasting for renewable energy system: a review.” Archives of Computational Methods in Engineering 29, 5 (2022): 2875-2891. [CrossRef] [Google Scholar]
  20. Akshatha, S., S. Sreenivasa, L. Parashuram, Fahad A. Alharthi, and Tadimety Madhu Chakrapani Rao. “Microwave assisted green synthesis of p-type Co3O4@ Mesoporous carbon spheres for simultaneous degradation of dyes and photocatalytic hydrogen evolution reaction.” Materials Science in Semiconductor Processing, 121 (2021): 105432. [CrossRef] [Google Scholar]
  21. Akshatha, S., S. Sreenivasa, L. Parashuram, V. Udaya Kumar, S. C. Sharma, H. Nagabhushana, Sandeep Kumar, and T. Maiyalagan. “Synergistic effect of hybrid Ce3+/Ce4+ doped Bi2O3 nano-sphere photocatalyst for enhanced photocatalytic degradation of alizarin red S dye and its NUV excited photoluminescence studies.” Journal of Environmental Chemical Engineering 7, 3 (2019): 103053. [CrossRef] [Google Scholar]
  22. Ramkumar, M., C. Ganesh Babu, K. Vinoth Kumar, D. Hepsiba, A. Manjunathan, and R. Sarath Kumar. “ECG cardiac arrhythmias classification using DWT, ICA and MLP neural networks.” In Journal of Physics: Conference Series, vol. 1831, 1, p. 012015. IOP Publishing, 2021. [CrossRef] [Google Scholar]
  23. Kumar, CB Pradeep, B. S. Prathibha, K. N. N. Prasad, M. S. Raghu, M. K. Prashanth, B. K. Jayanna, Fahad A. Alharthi, S. Chandrasekhar, H. D. Revanasiddappa, and K. Yogesh Kumar. “Click synthesis of 1, 2, 3-triazole based imidazoles: Antitubercular evaluation, molecular docking and HSA binding studies.” Bioorganic & Medicinal Chemistry Letters, 36 (2021): 127810. [CrossRef] [PubMed] [Google Scholar]
  24. Rajesh, A., K. Gopal, B. Rajesh Kumar, A. P. Sathiyagnanam, and D. Damodharan. “Effect of anisole addition to waste cooking oil methyl ester on combustion, emission and performance characteristics of a DI diesel engine without any modifications.” Fuel, 278 (2020): 118315. [CrossRef] [Google Scholar]
  25. Naik, Ramachandra, S. C. Prashantha, H. Nagabhushana, S. C. Sharma, H. P. Nagaswarupa, and K. M. Girish. “Effect of fuel on auto ignition route, photoluminescence and photometric studies of tunable red emitting Mg2SiO4: Cr3+ nanophosphors for solid state lighting applications.” Journal of Alloys and Compounds 682 (2016): 815-824. [CrossRef] [Google Scholar]
  26. Naveen Kumar, Rangaswamy, J. Suresh Goud, Pudhari Srilatha, Pattasale T. Manjunatha, S. Prasanna Rani, Raman Kumar, and S. Suresha. “Cattaneo-Christov heat flux model for nanofluid flow over a curved stretching sheet: An application of Stefan blowing.” Heat Transfer 51, 6 (2022): 4977-4991. [CrossRef] [Google Scholar]
  27. Vallabhuni, Rajeev Ratna, G. Yamini, T. Vinitha, and S. Sanath Reddy. “Performance analysis: D-Latch modules designed using 18nm FinFET Technology.” In 2020 International Conference on Smart Electronics and Communication (ICOSEC), 1169–1174. IEEE, 2020. [CrossRef] [Google Scholar]
  28. Dhanalaxmi, B., and G. Apparao Naidu. “A survey on design and analysis of robust IoT architecture.” In 2017 International Conference on Innovative Mechanisms for Industry Applications (ICIMIA), 375-378. IEEE, 2017. [CrossRef] [Google Scholar]
  29. Nikam, Pritam B., Jayendra Kumar, V. Sivanagaraju, and Achinta Baidya. “Dual-band reconfigurable EBG loaded circular patch MIMO antenna using defected ground structure (DGS) and PIN diode integrated branch-lines (BLs).” Measurement, 195 (2022): 111127. [CrossRef] [Google Scholar]
  30. Vallabhuni, Rajeev Ratna, Jujavarapu Sravana, Chandra Shaker Pittala, Mikkili Divya, B. M. S. Rani, and Vallabhuni Vijay. “Universal shift register designed at low supply voltages in 20 nm FinFET using multiplexer.” In Intelligent Sustainable Systems: Proceedings of ICISS 2021, 203-212. Singapore: Springer Singapore, 2021. [Google Scholar]
  31. Kishore, Somasundaram Chandra, Raji Atchudan, Thomas Nesakumar Jebakumar Immanuel Edison, Suguna Perumal, Muthulakshmi Alagan, Rajangam Vinodh, Mani Shanmugam, and Yong Rok Lee. “Solid waste-derived carbon fibers-trapped nickel oxide composite electrode for energy storage application.” Energy & Fuels 34, 11 (2020): 14958-14967. [CrossRef] [Google Scholar]
  32. Malagavelli, Venu, Srinivas Angadi, J. S. R. Prasad, and Subodh Joshi. “Influence of metakaolin in concrete as partial replacement of cement.” Int J Civil Eng Technol 9, 7 (2018): 105-111. [Google Scholar]
  33. Ashok Babu, Puralasetty, Javanna Latheef Mazher Iqbal, S. Siva Priyanka, Machana Jithender Reddy, Gaddam Sunil Kumar, and Rajaram Ayyasamy. “Power control and optimization for power loss reduction using deep learning in microgrid systems.” Electric Power Components and Systems 52, 2 (2024): 219-232. [CrossRef] [Google Scholar]
  34. Saritha, M., M. Lavanya, G. Ajitha, Mulinti Narendra Reddy, P. Annapurna, M. Sreevani, S. Swathi, S. Sushma, and Vallabhuni Vijay. “A VLSI design of clock gated technique-based ADC lock-in amplifier.” International Journal of System Assurance Engineering and Management 13, 5 (2022): 2743-2750. [Google Scholar]
  35. Pittala, Chandra Shaker, Rajeev Ratna Vallabhuni, Vallabhuni Vijay, Usha Rani Anam, and Kancharapu Chaitanya. “Numerical analysis of various plasmonic MIM/MDM slot waveguide structures.” International Journal of System Assurance Engineering and Management 13, 5 (2022): 2551-2558. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.