Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01130
Number of page(s) 9
DOI https://doi.org/10.1051/e3sconf/202455201130
Published online 23 July 2024
  1. Nadimalla, Altamashuddinkhan, Siti Aliyyah Masjuki, Siti Asmahani Saad, Ean Lee Woen, Siti Maisarah Ali, and Naseer Ulla. “The impact of manufactured sand (m-sand) as partially and fully replacement of fine aggregate in concrete.” Micron 27 (2020): 830. [Google Scholar]
  2. Pilegis, Martins, Diane Gardner, and Robert Lark. “An investigation into the use of manufactured sand as a 100% replacement for fine aggregate in concrete.” Materials 9, no. 6 (2016): 440. [CrossRef] [PubMed] [Google Scholar]
  3. Arulmoly, Branavan, Chaminda Konthesingha, and Anura Nanayakkara. “Performance evaluation of cement mortar produced with manufactured sand and offshore sand as alternatives for river sand.” Construction and Building Materials 297 (2021): 123784. [CrossRef] [Google Scholar]
  4. Kumar, K. Praveen. “Characteristics of cement mortar with M-sand as replacement of fine aggregates.” Materials Today: Proceedings 5, no. 11 (2018): 25412-25419. [CrossRef] [Google Scholar]
  5. Lokeswaran, M.R., and C. Natarajan. “Study on the properties of cement concrete using manufactured sand.” In Advances in Structural Engineering: Materials, Volume Three, pp. 1803–1809. Springer India, 2015. [Google Scholar]
  6. Suresh, S., and J. Revathi. “Effect of M-sand on setting time of high-performance concrete.” Asian Journal of Research in Social Sciences and Humanities 6, no. 10 (2016): 1648-1654. [CrossRef] [Google Scholar]
  7. Ali, Maisarah, Muhammad Hariz Nordin, and Siti Asmahani Saad. “Physical and mechanical properties of concrete incorporating manufactured sand.” Advanced Materials Research 1115 (2015): 160-165. [CrossRef] [Google Scholar]
  8. Sudha, C., K. Divya Krishnan, P.T. Ravichandran, and P.R. Kannan Rajkumar. “Strength Characteristics of high strength concrete using M-sand.” Indian Journal of Science and Technology (2016). [Google Scholar]
  9. Premanand, R., K. Thirupura Sundari, N. Aishwarya, and B. Karthikeyan. “An experimental analysis on the replacement of fine aggregate by manufacture sand.” Materials Today: Proceedings (2023). [Google Scholar]
  10. Suresh, S., and J. Revathi. “An Experimental investigation on effect of high strength concrete using manufacturing sand.” International Journal of Innovative Research in Science, Engineering and Technology 5, no. 2 (2016): 2135-2140. [Google Scholar]
  11. Zhao, Minglei, Manman Dai, Jie Li, and Changyong Li. “Case study on performance of pumping concrete with super-fine river-sand and manufactured-sand.” Case Studies in Construction Materials 18 (2023): e01850. [CrossRef] [Google Scholar]
  12. Mounika, T., and Ghanta Latha Bhuvaneswari. “Strength characteristics of concrete by replacing natural sand by M-sand for M20 and M30 grade concrete.” International Journal of Advance Scientific Research And Engineering Trends 6, no. 2 (2021). [Google Scholar]
  13. Mahakavi, P., and R. Chithra. “Effect of recycled coarse aggregate and manufactured sand in self-compacting concrete.” Australian Journal of Structural Engineering 21, no. 1 (2020): 33-43. [CrossRef] [Google Scholar]
  14. Mahakavi, P., and R. Chithra. “Effect of recycled coarse aggregate and manufactured sand in self-compacting concrete.” Australian Journal of Structural Engineering 21, no. 1 (2020): 33-43. [CrossRef] [Google Scholar]
  15. Nadimalla, Altamashuddinkhan, Siti Aliyyah Binti Masjuki, Sher Afghan Khan, and B.A. Akshatha. “The effect of replacement of natural sand by manufactured sand on the properties of the concrete.” In 2018 IEEE 5th International Conference on Engineering Technologies and Applied Sciences (ICETAS), pp. 1–7. IEEE, 2018. [Google Scholar]
  16. Nanthagopalan, Prakash, and Manu Santhanam. “Fresh and hardened properties of self-compacting concrete produced with manufactured sand.” Cement and concrete composites 33, no. 3 (2011): 353-358. [CrossRef] [Google Scholar]
  17. Kavya, Ayinampudi, and A. Venkateshwara Rao. “Experimental investigation on mechanical properties of concrete with M-sand.” Materials Today: Proceedings 33 (2020): 663-667. [CrossRef] [Google Scholar]
  18. Mane, K.M., P.A. Nadgouda, and A.M. Joshi. “An experimental study on properties of concrete produced with M-sand and E-sand.” Materials Today: Proceedings 38 (2021): 2590-2595. [CrossRef] [Google Scholar]
  19. Sankh, Akshay C., Praveen M. Biradar, S.J. Naghathan, and Manjunath B. Ishwargol. “Recent trends in replacement of natural sand with different alternatives.” In Proceedings of the international conference on advances in engineering and technology, pp. 59–66. 2014. [Google Scholar]
  20. Kazmi, Danish, Mehdi Serati, David J. Williams, Sadaf Qasim, and Yi Pik Cheng. “The potential use of crushed waste glass as a sustainable alternative to natural and manufactured sand in geotechnical applications.” Journal of Cleaner Production 284 (2021): 124762. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.