Issue |
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
|
|
---|---|---|
Article Number | 01012 | |
Number of page(s) | 11 | |
Section | Materials | |
DOI | https://doi.org/10.1051/e3sconf/202452901012 | |
Published online | 29 May 2024 |
Effect of replacement of natural sand by manufactured sand on the self-compacting concrete
1 Department of Mechanical Engineering, ABES Engineering College, Ghaziabad - 201009, UP, India
2 Department of Civil Engineering, GRIET, Hyderabad, Telangana - 500090, India.
3 Department of Information Science Engineering, New Horizon College of Engineering, Bangalore, India
4 Lovely Professional University, Phagwara, India
5 Lloyd Institute of Engineering & Technology, Knowledge Park II, Greater Noida, Uttar Pradesh 201306
6 Hilla University College, Babylon, Iraq
7 Lloyd Institute of Management and Technology, Greater Noida, Uttar Pradesh, India - 201306
* Corresponding author: abhisshek.s@gmail.com
This paper investigates the experimental analysis of concrete mixtures with different percentages of manufactured sand replaced for natural sand, with a focus on M25 and M30 grades. The study analyses various repairing times, with a special focus on 3, 14, and 28-day periods. The main conclusions show a clear pattern, with the maximum compressive strength for M25 and M30 grades being found at 50% and 100% replacement levels, respectively. This positive connection indicates that the amount of manufactured sand incorporation affects the compressive strength and shows its effect over different curing times. It is noteworthy that self-compacting concrete (SCC) made using crushed sand has a higher compressive strength than SCC made with natural sand. The study’s final findings, that emphasize the beneficial impacts of manufactured sand on SCC’s overall compressive strength characteristics, provide crucial data for enhancing concrete mix design. For the purpose of developing M sand, rocks are crushed to a similar size and form as natural sand or N-sand. The possible use of M-sand in SCC has been addressed in this paper. In this study, an effort has been made to analyze the potential use of M-sand in SCC. Self-Compacting Concrete (SCC) is a revolutionary concrete that allows for compaction and placement without the requirement for vibration. It may flow under its own weight even in the centre of dense reinforcement, entirely covering formwork and achieving full compaction. An attempt has been made to compare the characteristics of M35 self-compacting concrete in each its fresh and hardened states, substituting manufactured sand for river sand.
Key words: Concrete grade of M25 / M30 / manufactured sand / natural sand / concrete mixtures / compressive strength
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.